Career

Job Description

As a Senior Control Automation Engineer, you will be working across two engineering disciplines. Solution and engineering centre (NPI, ITO, OTR and Product Care) in all aspects of HVDC Control & Protection system, this includes developing organizational talent and Engineering process management, provide technical guidance, mentoring, drive consistent design practices, common global processes for projects implementation and also provide technical solution that meets the NPI , project delivery and Tender objectives.

This role is responsible to lead the requirement, design, implementation, and development of digital control system of the HVDC Control & Protection system.

Job Description Roles and Responsibilities Overseeing the overall technical solution that meets customer Requirement based on reference Solution.

This Includes The Following Actives

• Requirement & Design
• Overall Control System Architecture & communication networks Architecture
• IEC 61850 Implementation, system integration and system deployment
• Overall System Level Cybersecurity
• Overall Network design of the control & Protection System
• Customer interface and training
  • Responsible for leading overall requirement, design, implementation, and development of digital control system of the HVDC Control & Protection system this includes network & Cybersecurity design
  • Be the owner of all aspects of HVDC IEC 61850 Implementation and system deployment, system Configuration, and validation, as well as all usual integration challenges of the control & protection system
  • Implement and maintain the control & protection system reference and customer solutions
  • Execute and provide guidance for the analysis / evaluation of assigned projects that meet business standards, practices and procedures and the product / program requirements
  • Responsible for coaching and developing department talent.
  • Uses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations.
  • Continuously improving the product in terms of delivery speed, stability and reliability
  • Ensure security and compliance standards are taken into consideration into the design decisions
  • Review and approve design documents, implement, and ensures quality deliverables on time and within targeted cost

Required Qualifications

• Degree in Electronics/Electrical engineering or related field.
• Strong background in configuring Substation Bay Controllers/Merging Units/ IEC61850 IED’s
• Minimum of 15 years’ experience in control and protection system design
• Knowledge of industrial communication networks such as IEC61850 and Ethernet based protocols.
• Control & Protection Relay logics Design techniques
• Experienced in developing electrical designs for industrial control systems
• Knowledge of communication networks Security/Hardening and Cybersecurity best practices
• Excellent knowledge of commonly used Layer2&3 protocols such as Ipv4, OSPF, LACP, DMZ, VPN/ DMS/ADMS/ DNP, IEC, Modbus
• Experience relevant to electrical power systems and Substation automation engineering
• Working knowledge of industrial and utility electrical control and protection systems and Digital Control Systems, Substation Automation and SCADA

Desired Characteristics

• Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Ability to document, plan, market, and execute programs. Established project management skills.
• Proven technical leadership in a complex system engineering development environment
• Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in experts when needed
• Demonstrates track record of designing quality systems/components that exceed design reqs, beat cost targets, and exceed reliability targets

Job Description

In This Role, Your Responsibilities Will Be:

• End to End project design & engineering
• Implement Greenfield Power & Water as well as Lump Sum Turn Key (LSTK) projects efficiently
• Should have adequate experience in Hardware Engineering, Panel design, Understanding the Network Architecture, Exposure to Buyouts
• Understanding of buyouts such as (HMI, Servers, Cables, Control desk/furniture, Field Instruments, Relays, Barriers, HMI, UPS, Chargers, LVS etc.).
• Knowledge about Site walk-downs for data collection, IO list preparation.
• Experience in preparation of cable schedule, engineering documentation, technical quotations and business/customer correspondence.
• Understanding of the project cycle, time management and production phases.
• Awareness of technical risk during project execution and site activities.
• Experience in Pre-FAT and Conducting customer FAT (HW & SW) and SAT.
• Exposure to the support Procurement team and creating procurement requisition.
• Working with contractors / subcontractors and Vendors.
• Verification and functional testing of I/O interfaces to field devices and Supervision of control system installation, commissioning and start-up.
• Good communication skills both written and verbal for working in close collaboration and with global stakeholders.

Who You Are: You display a can-do attitude in good and bad times. You recognize when a solution can be balanced. You focus and monitor both formal and informal progress regularly. You provide calmness and efficiency, even when things are unclear. You convert ideas into actions and produce results with new initiatives.

For This Role, You Will Need:

• Bachelor’s degree in engineering (Electronics & Communication, Instrumentation & Control, or equivalent field)
• 7+ years’ project engineering experience in the field of DCS / PLCs and exposure to commissioning. With 4+years with Emerson
• Hardware design exposure, Procurement exposure.
• Control design, implementation, process testing for Power and related process Treatment plants.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form.
• Proficiency with ISA and SAMA logic symbols, Process & Instrumentation Diagrams (P&IDs), electrical, mechanical, and hydraulic schematics

Preferred Qualifications That Set You Apart:

• Excellent written and verbal communication skills
• Problem-solving, decision-making, and planning skills
• Ability to write reports, business correspondence and commission documents
• Ability to optimally present information and respond to queries from management, clients, and customers.
• Proficiency with one or more DCS/PLC platforms (e.g., ABB Pro Control / Bailey INFI 90 / Symphony Harmony, Yokogawa Centum VP / CS3000, Siemens T3000 / TXP, GE Mark V / VI, Mitsubishi DIASYS Netmation, Invensys, Honeywell TDC3000, MaxDNA, Metso DNA, Alstom Alspa 320, Allen Bradley / GE-Fanuc / Schneider / Siemens PLCs & SCADA etc.)
• Knowledge of datalinks (Modbus RTU / TCP-IP, ELC, Fieldbus, Profibus, OPC, etc)

Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives – because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results.

We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family’s physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave

About Us WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration.

We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world’s most complex problems — for our customers, our communities, and the planet. You’ll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor.
At Emerson, you’ll see firsthand that our people are at the center of everything we do. So, let’s go. Let’s think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let’s go, together.

Job Description

In This Role, Your Responsibilities Will Be:

• • Performs assignments that will develop professional work knowledge and abilities through the application of standard engineering techniques, procedures and criteria. Exercises limited but increasing judgment in performing assigned tasks. Using prescribed methods, performs specific and limited portions of a broader assignment of an experienced engineer.Job DimensionsSupervision Received
    • Receives technical and administrative supervision from Engineering Group Supervisor

    Supervision Exercised

     

    • Provide technical direction to ICSS Team members who develop 10 assignments, 10 Configuration, Implementation of Logics and Graphics and test the integrated system.

    Contacts

     

    • Maintains contact with the immediate work group or discipline and interfaces with other disciplines as specifically directed.

    Major Responsibilities

     

    • Preparation of Design Criteria for Controls and Instrumentation.
    • Development of Detailed design specifications for ICSS (DCS / SIS / FGS) and HMI / SCADA.
    • Preparation of Functional Safety Management Plan (FSMP) and Safety Requirement Specification (SRS). (Preferred)
    • Preparation of Complex Loop Control Narratives, Cause and Effect Matrix/Diagrams for Process and F&G Systems, Logic narratives.
    • Development of 1/0 data base for DCS, SIS, FGS and Mechanical Vendor Packages.
    • Preparation of Material Requisition for ICSS; Review of the various technical bids, initiate and resolve Technical queries with bidders and prepare Technical Bid Evaluation (TBE). Assist procurement team in finalizing the commercial bid evaluation and purchase order.
    • ICSS Supplier documents review
    • Preparation of Logic Typical/ control modules and testing for DCS, SIS and Fire and Gas System.
    • Customary Logic Development in DCS, SIS and Fire and Gas System.
    • Experience in populating ICSS Database using Supplier Bulk Loading Software from Instrument Index export.
    • Experience in developing typical software library based on Loop typical derived from P&IDs and Instrument Index.
    • Preparation of 10 List, 10 Allocation for customary / Remote 10 systems and details of cross-wiring between cabinets.
    • Design of Marshalling and System Cabinets.
    • Preparation of FAT / SAT procedures for ICSS (DCS / SIS / FGS) and test procedures for vendor PLCs offered by various package vendors.
    • Coordinate with the ICSS suppliers for all activities relative to Site Acceptance Testin (SAT) and Site Integration Test (SIT) of ICSS.
    • Assist and coordinate troubleshooting between instrumentation, ICSS, ECMS, and 3rd Party systems.
    • P&ID reviews and mark-ups for correct depiction of complex loops.
    • Application of Alarm Management in process industries with knowledge of ISA 18.2.
    • Development of ICSS network block diagram and System architecture.
    • Grouping & development of simple and complex HMI graphics based on PFDs, P&IDs and vendor documents for a DCS System.
    • Configuration Knowledge of Instrument Asset Management System (IAMS), Plant Historian (Preferred).
    • Develop Software and Hardware FAT plans and perform FAT with customer.
    • Develop/Review System Architecture for entire ICSS.
    • Support Project Manager for all technical aspects of project as well as support in various project activities such as scope review, kick off meeting, resource planning, engineering planning, procurement support, quality control, customer handling, risk monitoring control, progress report and closeout.
    • Analyze customer inputs and comprehend requirements such as Design Specifications, PIDs, Control Narratives, 10 List, Instrument Index, Operating Philosophies etc. and Raise Technical Queries when required.
    • Coordinate assigned work with other disciplines/ technical personnel as directed.
    • Participates in and fosters a work environment that is based upon forthrightness, trust, communication, teamwork, empowerment, innovation, and satisfaction.

    Education And Experience Requirements

     

    • B.Tech in Instrumentation & Control from a recognized university.
    • Level 1: 12 – 16 years of industry experience.
    • Level 2: 16+ years of industry experience.

    Preferred Qualifications

     

    • Engineering and Design experience in EPC and/or FEED Projects.
    • TUV/Exida Certified Functional Safety Professional and Certified Cybersecurity Professional.

    Required Knowledge And Skills

     

    • Thorough technical knowledge of Control Systems engineering.
    • Thorough knowledge of discipline engineering techniques, the design of engineered systems, and engineering and design calculations.
    • Comprehend industry regulatory codes and standards and design criteria pertinent to the particular engineering discipline.
    • Comprehend the standard engineering work planning, scheduling and cost estimating.
    • Job knowledge of various types of field Instrumentation, DCS, PLC, Hazardous areas is essential.
    • Design experience and working knowledge of DCS /SIS/ PLC and SCADA Networks, Fiber optic and CAT 6 is essential.
    • Basic awareness industry standards Application Programs such as SPI.
    • Good knowledge of MODBUS TCP/IP and RTU communication protocols.
    • TUV/EXIDA Functional Safety Engineer certification or experience in a functional safety role would be advantageous.
    • Strong oral and written communication skills.
    • Basic knowledge of Virtualization products like VMware, Hyper-V.
    • Preferred knowledge and working experience on the following systems:
    • Honeywell- Experion / Safety Manager
    • Yokogawa- Centum VP / Prosafe RS
    • Emerson- Delta V / Delta V SIS
    • Allen Bradley- Control Logix
    • Schneider – Triconex / Foxboro
    • Knowledge on performing Integrated testing between Software and Hardware.
    • Experience in handling FAT and SAT and change management.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • Support operations and maintenance activities through the development and execution of centralized engineering services for existing upstream and downstream business units/manufacturing facilities globally, provide technical expertise on all engineering subject matter pertaining design in discipline area and to Ensure design and engineering compliance with relevant codes, standards, and Company Standards. The candidate would be part in ExxonMobil Services and Technology Private Limited, Whitefield, Bengaluru in India.What You Will Do
    
    • Provide troubleshooting and reliability improvements for upstream, midstream and downstream business units manufacturing facilities to maintain safety, availability, and reliability of instrumentation systems while optimizing cost.
    • Develop and execute instrument surveillance programs.
    • Collect data using computer maintenance management systems (CMMS) or other available data sources.
    • Analyze maintenance records to determine instrument failure rates, availability / reliability calculations, bad actor / failure modes identification, and program effectiveness / cost analysis.
    • Integrate maintenance and process data into holistic understanding of instrument/process control performance.
    • Utilize risk-based work selection techniques to identify and justify maintenance/improvement items for inclusion in annual and periodic maintenance plans and events.
    • Coordinate, Monitor and handle discipline design and engineering with EPC Contractor as per project
    • expectation and complete the same within the time frame.
    • Review and approval of EPC Contractor’s work and ensure compliance with Project Specifications, relevant codes and standards and best industry practices in compliance with the contractual review periods.
    • Guide less experienced engineers on standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
    • Participate in the development and maintenance of Global Procedures, Software, and Standards.
    • Attend I&C equipment FATs, as required.
    • Participate in HAZOP, SIL, and Classification Studies, as required.

    What You Will Do Cont…
    

    • Assist in closing out HAZOP action items
    • Provide construction, pre-commissioning, and commissioning, Turnaround (Shutdown) Support as required.
    • Develop equipment strategies/maintenance plans for instrumentations and control systems taking into
    • consideration safety integrity level (SIL) assessment, Verification industry standards, regulatory requirement, and manufacturer recommendations. Support on Functional Safety assessment / Management studies.
    • Review, update, and develop I&C technical documentation / drawings including piping and instrumentation diagrams (P&IDs), cause and effect, and control narratives.
    • Execute control system and safety instrumented system (SIS)/ programmable logic controller (PLC) life cycle management programs which include system inventory, obsolescence plans, managing spare parts and upgrade/replacement planning.
    • Support control system and safety instrumented system (SIS)/ programmable logic controller (PLC)
    • Maintenance and test planning as required, software upgrades, emergency shutdown (ESD) testing, offline and online testing, and coordination of activities with/without plant shutdowns.
    • Create and Support Management of Change (MoC) activities for I&C scope.
    • Basic understanding of Cybersecurity Requirement for Control System as per Industry standards

    About You
    Skills and Qualifications
    

    • Bachelor of Engineering Degree from recognized university in Instrumentation and Controls, Electrical/Electronics.
    • Minimum 3 years of experience in application of instrumentation and controls engineering in oil and gas, Refining or Petrochemical industry for projects or operations.
    • Minimum 3 years’ experience in selection, sizing and application of pressure/temperature/ flow/ level instruments, control valves, shutdown valves, etc.
    • Familiarity with Industry standards, Country-specific regulations (CSR), and local codes.
    • Should have work permit to work in India.
    • Familiarity of Cybersecurity and Functional Safety in Process Industry as per Industry standards.

    Preferred Knowledge, Skills & Abilities
    

    • Demonstrated experience in selection, application, and data sheet specification of field hardware including pressure/temperature/ flow/ level instruments, control valves, shutdown valves, etc.
    • Experience in preparing specifications, selection, applications, configuration/programming of Safety Instrument Systems.
    • Understanding of the impact of equipment sparing, redundancy, reliability, availability, maintainability, and maintenance cost in support of Operations Excellence and Capital efficiency
    • Working knowledge of complex instrument systems, such as machinery control systems, vibration monitoring systems, custody transfer metering, fired heater burner management, Tank gauging system etc.
    • Able to review, evaluate, and update cause and effect, piping and instrumentation diagrams (P&IDs), logic and architecture diagrams and control narratives.
    • Proficient in data collection and analysis with common database and software data analysis tools such as SAP, Analytics for excel and tableau.
    • Certification in Functional Safety from recognized institution
    • Certification in Cybersecurity as per industry standard from recognized institution
    • Strong verbal and written communication skills in English.

    Your Benefits
    An ExxonMobil career is one designed to last. Our commitment to you runs deep: our employees grow personally and professionally, with benefits built on our core categories of health, security, finance and life. We offer you:

    • Competitive compensation
    • Medical plans, maternity leave and benefits, life, accidental death and dismemberment benefits
    • Retirement benefits
    • Global networking & cross-functional opportunities
    • Annual vacations & holidays
    • Day care assistance program
    • Training and development program
    • Tuition assistance program
    • Workplace flexibility policy
    • Relocation program
    • Transportation facility

    Please note benefits may change from time to time without notice, subject to applicable laws. The benefits programs are based on the Company’s eligibility guidelines.
    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • Start your Jacobs career with a company that inspires and empowers you to deliver your best work so you can evolve, grow and succeed – today and into tomorrow.About The Opportunity
    • Clear knowledge of work procedures, and ability to work independently.
    • Delivering Drawings to desired quality standards and according to mutually agreed timelines with the client.
    • Able to communicate in confidence with client or foreign counterpart.
    • Working in team to deliver projects on time.
    • Attending meetings with technical leads.
    • Shall be able to independently handle I & C work in projects.
    • Shall be able to design and implement SCADA systems, including DCS, PLCs, and HMIs, for municipal water/wastewater projects.
    • Shall be able to control system design recommendations, programming, schematic design, and troubleshooting to ensure high system availability.
    • Shall be well versed instrument selection criteria.
    • SCADA system design and implementation experience in process control systems, P&ID development, control system network architecture development, instrumentation and controls design, control strategy development, and network security systems
    • Experience with SCADA system commissioning, including troubleshooting and problem-solving techniques to maintain high SCADA system availability.
    • Working knowledge of PLC and HMI programming functionality and execution
    • Preparation of design basis, space planning for control rooms
    • Shall have knowledge all I & C related deliverables and drawings.

    Here’s what you’ll need

    About You

     

    • BE/B Tech/ME/M Tech Electrical with 7 years and above experience.
    • Specific experience in municipal water/wastewater projects and a solid understanding of control systems engineering.
    • Ability to carry out inter- disciplinary coordination.
    • Resolve any design issues & coordinate effectively with leads
    • Plan, schedule, conduct, and communicate work with team members all design aspects of the project.
    • Attend client meetings for technical clarifications.
    • Capable of working under challenging workload subject to change at short notice.
    • Good communication & IT skills.
    • Clear knowledge of work procedures, and ability to work independently.
    • Delivering Drawings to desired quality standards and according to mutually agreed timelines with the client
    • Able to communicate confidently with client or foreign counterpart.
    • Working in team to deliver projects on time.
    • Software Skills
      • PLC/SCADA Software
      • Blue beam Revu
      • Proficiency with Microsoft Office Suite

    At Jacobs we value people. Having the right balance of belonging, career and lifestyle enables us to consistently deliver and exceed clients’ expectations.

    Working alongside industry leaders, you will have the opportunity to develop your career working on key projects in an environment which encourages collaboration, knowledge sharing and innovation. To support your professional growth, Jacobs flexible working arrangements, extended leave options and a host of social, health and wellbeing events and initiatives will underpin our commitment to you.

    At Jacobs it’s all about what you do, not where you are, which counts!

    We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery. We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work.

    Your application experience is important to us, and we’re keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support.
    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • BE or BTech in Electronics /Instrumentation/Electrical Engineering.Skills and Competency :a) Basic Technical Knowledge in DCS/PLC/Scada/Instrumentation.b) Good communication skills,d) Self motivated and self learning.Yokogawa is an Equal Opportunity Employer. Yokogawa wants a diverse, equitable and inclusive culture. We will actively recruit, develop, and promote people from a variety of backgrounds who differ in terms of experience, knowledge, thinking styles, perspective, cultural background, and socioeconomic status. We will not discriminate based on race, skin color, age, sex, gender identity and expression, sexual orientation, religion, belief, political opinion, nationality, ethnicity, place of origin, disability, family relations or any other circumstances. Yokogawa values differences and enables everyone to belong, contribute, succeed, and demonstrate their full potential.
    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • In this role, you will have the opportunity to act as commissioning lead for high complex projects. Each day, you will ensure completion of all commissioning activities effectively and cost-efficiently and in accordance with contract specifications, quality standards, safety requirements, and cybersecurity policies and standards. You will also showcase your expertise by providing technical solutions to meet current and emerging business and customer requirements.The work model for the role is:This role is contributing to the Robotics & Discrete Automation in Bangalore & Pune, India.You will be mainly accountable for:
    • Design, develop, and customize PLC programs using Ladder Logic, Structured Text, and other IEC 61131-3 languages for various machinery and production lines.
    • Integrate PLCs with sensors, actuators, HMIs, SCADA systems, and ensure seamless communication using industrial protocols like Modbus, Profibus, and Ethernet/IP.
    • Perform on-site commissioning, testing, troubleshooting, and maintenance of PLC-controlled systems; travel up to 80% across India based on project requirements.
    • Prepare and maintain technical documentation including wiring diagrams, program logic, user manuals, and operating guides using MS Office tools.
    • Collaborate with cross-functional teams and ensure compliance with safety standards while coordinating with vendors and customers for timely support and delivery.

    Qualifications For The Role

     

    • Diploma or Bachelor’s degree in Mechanical or Production Engineering
    • 6–12 years of experience in Bodyshop/Chassis shop installation and commissioning, preferably in automotive or automation industries
    • Strong expertise in handling Spot-Welding jigs, Arc welding fixtures, Roller hemming fixtures, with sound knowledge of BIW processes
    • Proficient in PLC programming using Ladder Logic, Structured Text, and Function Block Diagram (FBD)
    • Hands-on experience with PLC platforms such as Siemens (TIA Portal, Step 7), Allen-Bradley (RSLogix, Studio 5000), and Mitsubishi
    • Skilled in HMI/SCADA development using tools like Wonderware, WinCC, and Ignition
    • Familiarity with industrial communication protocols including Modbus, Profibus, Ethernet/IP, OPC UA, and CANopen
    • Strong electrical knowledge including reading schematics and working with sensors, actuators, relays, and motor controls

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • Develop solutions to replace obsolete equipment/parts to able to maintain the business’ fleet of industrial steam Turbines.
    • Write complex Governing & Protection software modules from philosophy document’s or convert obsolete control system into software driven system.
    • Deliver Controls Applications Software Service Modification & Upgrade Projects based on current industrial Steam Turbine Operating Philosophy
    • To be able to design/construct new hardware solutions to replace obsolete controls system or upgrade current control systems.
    • To convert these solutions into generic replacement kits/parts for retrofitting
    • Support the Installation & Commissioning Team when required to Identify and rectify problems found during installation and commissioning of equipment/software solutions supplied.
    • Support the Engineering sales and tender to supply detailed quotes with regards to engineering times/potential hardware requirements/possible engineering solutions with regards to customer enquires
    • The post will also support the existing Controls Engineering Teams in the design and development of Control Systems for Steam Turbine Equipment as supported by Siemens Energy Services
    • Prepare (FAT & SAT) Factory & Site Acceptance Test procedures for protection systems projects.
    • Be a technical leader in projects or lead other team members in project activities.
    • Be one of our primary customer interfaces, including trouble shooting and commissioning support.
    • Provide technical support throughout the project lifecycle, including design, implementation, and commissioning phases.
    • You’ll win us over by having the following qualifications:
    • Basic Qualifications:
    • A bachelor’s degree in Electronic/Instrumentation engineering or relevant field.
    • 10+ years of experience in Control system design in the Control Engineering Field.
    • Proven experience working with Engineering Base (EB) Software and the Global Engineering Library (GEL) database for design.
    • Knowledge of Siemens Step7, WinCC, TIA Portal, PCS7 and T3000 automation products and associated software.
    • Communication Network Technologies, including Design and hardware configuration.
    • Communication protocols such as IEC61850 (MMS/GOOSE/SMV), DNP, Modbus, IEC103, IEC101, IEC104, Profinet, Profibus.
    • Control and Protection commissioning experience.
    • Knowledge of ANSI standards, IEC standards.
    • Around 45% of travel is expected depending on project assignments and requirements.
    • Preferred Qualifications:
    • Project Lead experience.
    • Advanced Knowledge of Microsoft Visio tools.
    • Advanced Knowledge of Microsoft Office.
    • Experience working with AutoCAD/AutoCAD Electrical.

    We don’t need superheroes, just super minds.

     

    • A degree or equivalent experience / professionally accredited or recognized in an engineering subject area preferably relating to the fields of Controls, Electrical, Electronics, Instrumentation, and Software.
    • Working experience with industrial controls systems applications and industrial IT networks, specific experience with Siemens S7, Siemens S7 TIA, PCS7, WinCC, T3000 or having worked with similar products used for the control and protection of industrial steam turbine technology or general process plant operations.
    • Working knowledge of change/configuration management tools and processes, as well as experience with other IT related tools and software for business analytics and project management.
    • Experience with working with P&ID’s and ISA/ANSI standards.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • Lead Instrumentation & Control Engineer leads the team of instrumentation & control engineers and designers and independently define, plan and manage the issuance of instrumentation & control deliverables and execute the project instrumentation & control engineering activities in accordance with project specifications, schedule, cost and quality, mainly for Topside facilities in FPSO/FLNG or Offshore facilities.Lead Instrument Engineer develops corporate technical standards/procedures, workflow, engineering platform (e.g. Instrument design data integration) and keep them updated, integral, practical and fit to purpose with incorporating Project Lesson Learns.Lead Instrumentation & Control Engineer assists Head of Discipline for managing a corporate organization and mentors Instrument Engineers in the Discipline.Lead Instrument Engineer conducts technical validation and quality assurance (input/output data accuracy, technical appropriateness, consistency, practicality, code, optimum solution and regulatory compliance) in executing Feasibility /Conceptual Study/Pre-FEED/FEED, EPCI Engineering for FPSO/FLNG or Offshore facilities projects.This role may require frequent travel to the US, Europe, and Asia.The strategic focus will also include providing support to Hanwha Ocean engineering teams based in USA/Netherland/Singapore/India and elsewhere as necessary including Conceptual, pre-FEED and FEED for projects in the offshore area in the future.Key Responsibilities
      • Assist Topside Instrument Head of Discipline / Principal Engineer to manage corporate organization
      • Update and Maintain EPCI and O & M Phase Lesson Learnt database
      • Ensure all engineering documents are prepared and developed in accordance with relevant design code, standard and client’s project specification.
      • Provide engineering review and support for bid proposal including estimate of manhour and cost.
      • Raise Technical Queries towards the client’s project documents, Design basis to ensure all scopes of work and design basis are clarified.
      • Attend project meetings internally and externally (with clients, third party, sub-contractor) and generate MOM
      • Manage interface with all relevant disciplines to get necessary information for Instrumentation & control engineering or to provide data to other disciplines for their engineering
      • Mentor junior or less-experienced Instrument engineers
      • Report Area of Concerns, Progress and Plan to Head of Discipline
      • Ensure Compliance with regulatory requirements
      • Develop Project Design Philosophies, Standards, Procedure
      • Working in Engineering Software – SPI , AVEVA Instrument, Instru Cal
      • Conduct feasibility studies, Pre-FEED, FEED, FEED Verification (Inception of EPCI Phase) and EPCI phase Engineering
      • Develop Instrument calculations, studies and deliverables
      • Close out comment/punches/recommendation from HAZOP, Vendor HAZOP, HAZID, SIL, 3D Model, Constructability Review and etc.
      • Review and approve Vendor Documents, Instrument Deliverables and inter discipline documents
      • Provide engineering support for construction, commissioning and operation team
      • Ensure issuance of as-built Instrument deliverables

      Qualifications

       

      • Minimum bachelor’s degree in Instrument/ Electronics & communication or equivalent Engineering
      • Minimum 15 years’ experience with 10 years’ experience at FPSO contractor or Offshore/Onshore EPC contractor
      • -Minimum 1 FPSO / FLNG / Offshore FEED/EPCI Project experience
      • leadership skills with ability to manage multiple priorities
      • -Skill to plan, schedule, organize resource and supervision of design and engineering tasks for teams
      • Working experience in Engineering Software – SPI , AVEVA Instrument, Instru- Cal
      • Ability to work effectively independently and as part of a multidisciplinary team, with strong attention to detail and accuracy. ability to manage multiple priorities
      • Ability to work with and to communicate effectively with co-workers, vendors, clients and manage multiple priorities.
      • Fluent in English, with strong oral and written communication skills

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • Security Architecture Development: Design security architecture for Manufacturing IT and OT connectivity aligned with policies and best practices; define authorization concept (need-to-know, least privilege); lead secure IT/OT connectivity for real-time data; advise Asset Owners on access control (RBAC), roles, privileges, and account management.
      • Security Architecture for central provided Manufacturing IT systems: Architect security standards for MES and IIoT (scalable integration, secure data, centralized monitoring); support Valus Center programs MES@SE and MIT; define plant and BA-specific architecture blueprints.
      • Machine Connectivity and IIoT Integration: Design secure connectivity for Manufacturing IT, OT, and IIoT; define and implement communication standards and protocols (OPC UA, MQTT) for secure, efficient data exchange.
      • Consult Business Area and plant specific initiatives: Collaborate with sites to strengthen machine-to-network security; consult on secure IIoT deployments and automation; support predictive maintenance, process optimization, and energy efficiency aligned with corporate policies.
      • Data Protection and Privacy: Implement data protection for sensitive product data across its lifecycle; ensure compliance with data privacy regulations in Manufacturing IT and data handling.
      • Operational Security: Document operating procedures (architecture, responsibilities, change management, incident response); apply the four-eyes principle; develop incident response plans; conduct risk assessments, threat modeling, and mitigation controls.
      • Compliance and Documentation: Ensure compliance with security standards and regulations; document all security processes and changes; collaborate with Asset Owners and Asset Managers on operational requirements and approvals.

      What You Bring

       

      • A bachelor’s degree in Computer Science, Information Technology, or a related field; a master’s degree is preferred.
      • 7+ years in IT security, including 3+ years focused on Manufacturing IT security architecture and access control.
      • Deep knowledge of Manufacturing IT security architecture, RBAC, identity management, and connectivity protocols (e.g., OPC UA, MQTT), with hands‑on work in MES/IIoT.
      • Proven ability to conduct risk assessments and threat modeling, manage security incidents, and apply application security practices (OWASP, input validation, separation of data and code).
      • Familiarity with ISO 27001, NIST, and Segregation of Duties (SoD); strong analytical, collaborative communication skills; and scripting to automate security tasks.
      • Ability to conduct risk assessments specific to Manufacturing IT environments.
      • Familiarity with Manufacturing IT security best practices and compliance requirements (e.g., ISO 27001, NIST).
      • Skills in identifying and mitigating vulnerabilities in Manufacturing IT systems.
      • Skills in identifying, responding to, and managing security incidents within Manufacturing IT environments.
      • Knowledge of Application Security: known weaknesses (CWEs, injection flaws), good practices (separation of data and code, input validation, encoding). See OWASP project and related content.
      • Must have Certified Information Systems Security Professional (CISSP) or equivalent certifications.
      • Certified Information Security Manager (CISM) or Certified Information Systems Auditor (CISA) are good to have.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • Technology is a global function within BHP that builds and maintains Reliable, Impactful, Safe and Efficient technology. Cybersecurity is a key part of this team that manages BHP’s internal and external attack surface, safeguarding our people, data, and business operations against evolving threats.Specialist Cybersecurity Architecture is responsible for assisting in translating enterprise cybersecurity strategy into scalable and resilient architecture patterns and frameworks. This role will assist the design, review, and governance of secure-by-design solutions across BHP’s digital platforms, cloud environments, and OT systems. The role ensures security is embedded at the architecture layer across all technology domains, enabling secure transformation, regulatory alignment, and threat resilience.In This Role, Your Key Accountabilities Will Include
        • Support in establishing and maintaining architectural standards, blueprints, and reference models to support secure digital transformation and innovation (including emerging technologies such as AI).
        • Support in governing cybersecurity architecture through active involvement in the change forums, approving changes and managing deviations and exceptions.
        • Conduct, manage and oversee technical security risk assessments for programs, platforms, and transformation initiatives, ensuring effective risk articulation and remediation.
        • Assist in embedding secure-by-design principles into technology initiatives and partner with architects to integrate cybersecurity requirements from ideation to implementation.
        • Engage and influence stakeholders across Technology, Risk, Operations, and Digital Innovation to align cyber architecture with business value.
        • Continuously assess and uplift architectural security maturity and benchmark digital trust practices against industry standards.
        • Assist in Integration of cyber architecture with enterprise architecture frameworks and support compliance with audits, regulations, and legal mandates.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • You’re good at what you do and possess the required experience to prove it. However, equally as important – you have a growth mindset; keen to drive your own personal and professional development. You are customer-focused – someone who prioritizes customer success in their work. And finally, you’re open and borderless – naturally inclusive in how you work with others.Required Skills And Experience
        • X years of experience in engineering/deploying security technologies e.g., EDR, MDR, SIEM, SOAR
        • Demonstrated experience with managing and maintaining current system security measures as well as implementing new systems
        • Experience with cloud security, cyber resiliency/incident management, Zero Trust, network/EDGE security, and emerging technologies such as IoT and AI
        • Expertise in network, host, and cloud-based security, attack techniques, analysis, and investigation
        • Deep understanding of the current cyber threat landscape, the different tactics commonly used by adversaries and how you would investigate, contain and recover against their attacks

        Preferred Skills And Experience

         

        • Bachelor’s degree in Computer Science, Cybersecurity, Information Technology, or other related fields
        • Preferred Certifications in Cyber Security: ECTHP (Certified Threat Hunting Professional) or  ECMAP (Malware Analysis Professional)
        • Experience in security monitoring and in advanced analytics (UEBA)

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • Automate SBOM generation for OT & SCADA components
      •  Perform vulnerability assessment across apps, OS, firmware, containers & industrial devices
      •  Set up & maintain vulnerability & threat-analysis tools
      •  Collaborate with developers & product teams for component intelligence
      •  Create and maintain detailed security assessment reportsWhat We’re Looking For
      •  Experience in IT/OT security & pen testing
      •  Strong knowledge of Linux/Windows, Docker & Kubernetes
      •  Understanding of industrial/ICT architectures
      •  Skills in Python, Ansible & automation
      •  Strong analytical thinking & communication skills
      •  Bachelor’s in CS/IT or related
      •  OSCP or equivalent is a plus
      • 🚀 We’re Hiring: Engineer ICS Security
        📍 Location: Chennai | 🏢 5 Days 🧠 3+ Years IT/OT SecurityJoin us to strengthen the cybersecurity of wind farm OT & SCADA systems! 🌬️🔐What You’ll Do
        ⚡ Automate SBOM generation for OT & SCADA components
        ⚡ Perform vulnerability assessment across apps, OS, firmware, containers & industrial devices
        ⚡ Set up & maintain vulnerability & threat-analysis tools
        ⚡ Collaborate with developers & product teams for component intelligence
        ⚡ Create and maintain detailed security assessment reportsWhat We’re Looking For
        ⚡ Experience in IT/OT security & pen testing
        ⚡ Strong knowledge of Linux/Windows, Docker & Kubernetes
        ⚡ Understanding of industrial/ICT architectures
        ⚡ Skills in Python, Ansible & automation
        ⚡ Strong analytical thinking & communication skills
        🎓 Bachelor’s in CS/IT or related
        🏅 OSCP or equivalent is a plus🔎 Note: One of the interview rounds will be conducted face-to-face.📩 Apply at: sachin.das@manpower.co.in

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • Works on strategic projects that ensure the efficient and effective reaction to security breaches to mitigate immediate and potential threats.
        • Uses mitigation, preparedness, response and recovery approaches to minimize business disruptions and commercial consequences.
        • Offers detailed technical support investigation and analysis response activities and evaluate the effectiveness of and improvements to existing practices.
        • Conducts regular threat and vulnerability assessments and determine deviations from acceptable configurations or policies.
        • Participates in the assessment of the level of risk and support the development of appropriate mitigation countermeasures in operational and non-operational situations.
        • Analyzes evidence to support network vulnerability mitigation.
        • Supports peers in the management and implementation of the information security management system.
        • Participates in the implementation of policies, processes and guidelines to ensure the standardization of security management throughout the organization.
        • Applies tactics, techniques, and procedures to a full range of tools and processes related to administrative, criminal, and counterintelligence gathering (e.g., in-depth case analyses, continuous monitoring, malware analysis, clear documentation).
        • Proactively searches through our critical infrastructure, systems and networks to detect and isolate advanced threats that may cause harm to our organization.
        • Use both manual approaches and automated tools to identify, analyze, and report events and support the development of countermeasures to proactively protect against these threats in the future.

        To thrive in this role, you need to have:

         

        • Strong understanding of information technology and information security
        • Solid understanding of security risks and preventative controls
        • Excellent understanding of security operational processes and controls
        • Service consulting aptitude, focusing on the business, service and sales aspects
        • Excellent verbal and written communication skills
        • Demonstrate impeccable attention to detail are able to translate internal customer requirements into solutions
        • Maintain up-to-date knowledge of security threats, countermeasures, security tools, and network technologies
        • High level of drive and ability to work under pressure
        • Ability to build and maintain cross-functional relationships with a variety of stakeholders
        • Understanding of relevant laws, regulations, and compliance frameworks affecting the technology sector.
        • Good ability to assess and manage cybersecurity risks at both organizational and project levels.
        • Good knowledge of security frameworks and standards like NIST, ISO/IEC 27001, CIS, etc.

        Academic qualifications and certifications:

         

        • Bachelor’s degree or equivalent in Information Technology or Computer Science or Engineering or related field.
        • Industry relevant certifications such as CISSP, CISM, CEH, GSEC or CompTIA Security+ essential.

        Required experience:

         

        • Seasoned demonstrable experience in the Information Technology Security Industry or relevant experience in similar role within a related environment.
        • Seasoned experience with security architecture design principles.
        • Seasoned experience with industry compliance and standards such as ISO 27000, PCI DSS, NIST, HIPAA or others.
        • Seasoned experience with security tools and techniques to cover SANS Top 25, OWASP or others.
        • Seasoned experience working in a multi-team environment across multiple geographies.

        Workplace type:

        Hybrid Working

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • Lead and manage large, complex, and transformational cybersecurity projects and engagements.
          • Architect and provide advisory on cybersecurity frameworks integrating network technologies, IAM, data security, cloud, and security tools.
          • Incorporate AI technologies and tools into cybersecurity solutions and advisory practices.
          • Inspire, manage, and develop team competencies fostering a high-performance culture.
          • Drive business development efforts including sales, proposal development, and client engagement.
          • Oversee project delivery ensuring high quality standards, managing risks, and client expectations.
          • Build and maintain strong client relationships, understanding client needs and providing tailored cybersecurity consulting solutions.
          • Continuously learn and adopt new technologies to maintain competitive advantage and client relevance.

          Required Skills:

          • 10-13 years of professional cybersecurity experience, preferably within consulting or OEM environments.
          • Strong knowledge and experience in network technology, IAM, data security, cloud security, and associated security tools.
          • Conversant with AI technologies and projects—advisory or implementation experience considered a plus.
          • Demonstrated ability to lead and manage large or transformational cybersecurity engagements.
          • Strong leadership skills with proven experience in inspiring, managing, and building competencies in teams.
          • Business acumen with demonstrated ability to sell cybersecurity consulting services and manage delivery teams effectively.
          • Excellent communication, negotiation, and client management skills.
          • Strategic thinker with strong problem-solving and organizational capabilities.
          • Educational Qualification: Bachelor’s degree in IT, Computer Science, Information Security, Engineering or related field; MBA preferred.
          • Familiarity with cybersecurity frameworks and standards such as ISO 27001, NIST, and relevant industry regulations.

          Mandatory Skill Sets:

          • Cybersecurity, AI

          Preferred Skill Sets:

          • Certifcations :CISSP, GICSP, ISA 62443, CCNP, PCNSA, PCNSE, LPIC-1, RHCSA

          Years of Experience:

          • 10+ Years

          Educational Qualification:

          Btech, MBA preferred

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • Implement WIZ/Prisma to secure cloud-native applications across containers, serverless environments, and VMs.
            • Integrate security scans into CI/CD pipelines to enable DevSecOps best practices.
            • Manage vulnerability detection, compliance checks, and runtime protection for Kubernetes and cloud workloads.
            • Collaborate with DevOps and cloud teams to shift security left, embedding security early in the development lifecycle.-
            • Develop and enforce policies for secure application deployment in cloud-native environments.
            • Design and maintain automated security workflows using WIZ/Prisma across multi-cloud environments (Azure, AWS).
            • Enable real-time threat detection and incident response for containerized workloads and cloud services.
            • Define and implement best practices for vulnerability management, image scanning, and compliance reporting
            • Collaborate with developers to create secure-by-design container images and Infrastructure as Code (laC) templates.
            • Monitor and optimize WIZ/Prisma policies to adapt to evolving cloud-native application architectures.
            • Drive security automation initiatives to minimize manual intervention and increase Cloud environment maturity.
            • Identify and address vulnerabilities in cloud configurations, ensuring compliance with industry standards and monitoring cloud infrastructure for security gaps.
            • Automate deployments and integrate security tools using Python and Terraform.

            Preferred Requirements:

             

            • Expertise in WIZ/Prisma Cloud for cloud-native application security.
            • Hands-on experience with Terraform for automating infrastructure provisioning and security.
            • Familiarity with CSPM tools like Wiz/Prisma CSPM for monitoring and improving cloud security posture.
            • Proficiency in scripting and automation using Python to streamline processes.
            • Strong understanding of cloud environments (AWS, Azure, GCP) and their native security services.
            • Knowledge of DevSecOps principles, including integrating security into CI/CD pipelines and adopting Infrastructure as Code (laC) practices.
            • Ability to adapt security workflows to evolving multi-cloud and containerized application architectures.

            Required:

             

            • Minimum of 5 years of IT experience
            • At least 3+ years of specialization in CSPM tools
            • At least 2+ years of application development in python.
            • At least 2+ Experience with programming languages such as Terraform.
            • Minimum 2-3 years of experience in implementing and managing WIZ/Prisma Cloud for cloud-native application security.
            • 3-5 years of experience in managing and securing multi-cloud environments (AWS, Azure, GCP) with native security tools.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • The work is varied and may include some or all of the responsibilities mentioned below:
              • Design and development of engineering project pertaining to C&I design through concept, FEED, Basic Engineering to Detail engineering.
              • Preparation of technical concept reports by having clear understanding on customer’s needs and working with other disciplines and global offices.
              • Preparation of other design deliverables essential during concept, feasibility, optioneering, design development stages.
              • Technical and team leadership.
              • Check, review and develop various instrument deliverables of the project including input/output list, instrument list, instrument data sheets, and functional specifications, their assessment and justification.
              • Development of control system specification and its system architecture
              • Development of Control and Protection philosophy of plant.
              • Preparation of Cause & Effect diagrams and control function diagrams.
              • Equipment/Instrument selection and procurement, identification of all safety (nuclear and operational) requirements.
              • Production of vendor packages, coordination with manufacturer/contractor, review of vendor drawings/documents.
              • Liaising with all stakeholders and responsible for all technical issues related to their area of specialization; Co-ordination with other discipline specialists where areas interface or overlap exist.
              • Preparation of instrument specifications, loop diagrams and cabling schematics, schedules and location layouts
              • Participation in 3D model review and other design reviews of the project.
              • Estimation of costs and delivery of the work package within required timescales
              • Design/selection of PLCs/DCS/Data Processing Systems / Process Control High Integrity Plant Protection Systems.
              • Production of deliverables such as various design documentation, requirement specification and substantiation reports.
              • Co-ordination with other discipline specialists where areas interface or overlap exist.

              About You

               

              • Candidate should possess the following qualifications, skills and experience.
              • Suitable degree in Control and Instrumentation with domain experience in energy systems. Experience in detail engineering consultancy is preferred. 12- 18 years of work experience in the Control and Instrumentation engineering.
              • Experience in Nuclear, Power, Oil & Gas or other highly regulated industrial environment preferred.
              • Experience of working on UK, Canada, USA and Middle East project
              • Experience of Process Control & Instrumentation/Reactor Protection and Regulation system design.
              • Knowledge of Power Plant design and various systems associated with power plant i.e, Boiler, Turbine, Generator and Balance of Plant systems.
              • Commissioning experience will be an added advantage.
              • Understanding of project lifecycle and various stages of engineering project.
              • Knowledge of safety systems/high integrity systems/equipment, automation system design.
              • Knowledge of functional safety and its relevant industrial standards i.e. IEC 61508, 61511, 61513, know-how for SIL categorisation/ Integrity Targets and safety life cycle.
              • Development of Safety Requirement Specification, Functional Safety Management Plan, RAM analysis, Fault Tree Analysis.
              • Participation in various SIL Studies, LOPA and HAZOP
              • Working knowledge of field instrumentation including datasheets and hook-up drawings.
              • Understanding and knowledge about control valve and flow element sizing
              • Preparation of Control Logic Diagram, Loop Diagrams, Instrument Location and Instrument Installation Design.
              • Development of specification for PLC/SCADA/DCS and knowledge related to its Hardware and Software configuration.
              • Development of Control System Architecture for the entire plant.
              • Good understanding in Operational Technology (OT) Cybersecurity principles, able to understand the design concepts relevant to mitigate and prevent the exploitation of plant control system.
              • Good knowledge of Hazardous Area Classification and various protections.
              • Good knowledge of industrial communication standard protocols
              • Knowledge to Plant 3D model software, Smart Plant Instrumentation (SPI) and AVEVA.
              • Design knowledge of access control system, CCTV system, telephone, and PA system.
              • Working knowledge of cabling systems which include cable block diagrams, cable schedules, cable routing drawings, schematics, termination schedules and cable specifications.
              • Takes responsibility for nuclear safety with the ability to challenge appropriately.
              • Good working knowledge of industry standards, design and installation codes of practice and regulations.
              • A flair for solving complex problems from first principles and the ability to deliver multiple projects simultaneously.
              • Has the ability to generate cost effective ideas at various project stages.
              • Has the acumen of bringing on table digital innovative ideas benefitting the team and organization.
              • Strong delivery culture, and maintenance of strict timelines.
              • Proven computer aptitude, and expertise in MS office; Knowledge of AutoCAD and Visio desirable.
              • Demonstrable knowledge of multidisciplinary design projects, and relevant knowledge of site operations of process plant is desirable.
              • Having good knowledge in Technical Report writing
              • Participates in client and internal design reviews.
              • Ability to understand and define client’s requirements, plan & schedule deliverables, timelines.
              • Strong delivery culture, ability to multi-task, resource management, delegate tasks, develop and deliver cost/time-effective solutions.
              • Experience supporting construction and commissioning phases.
              • Experience or exposure to project management principles is desirable.
              • Ability to understand and define client’s requirements, plan & schedule deliverables, timelines.
              • Ability to mentor junior engineers and support them with technical guidance.
              • Ability to lead the entire project independently with minimum guidance and support.
              • Proven strong problem solving, organizational and interpersonal skills.
              • Excellent written and verbal communication and presentation skills with a proven ability to write accurate, detailed and concise technical reports.
              • Flexible to relocate to AtkinsRéalis India Office Locations (Bangalore/Gurgaon/Mumbai) flexible in travelling to AtkinsRéalis’ and client’s’office locations around the world, if required.
              • Experienced and innovative team player with the ability to work on own initiative and to take responsibility for the development and supervision of design projects.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • • Monitor security alerts, incidents, and system vulnerabilities.
                • Implement security policies, controls, and best practices.
                • Support audits, compliance, and risk assessments.
                • Train employees on cybersecurity awareness.
                • Respond to incidents and coordinate recovery efforts.

                Qualifications

                • Bachelor’s degree in IT, Cybersecurity, or related field.
                • 0–3 years in IT security; new graduates with relevant certifications are welcome.
                • Familiarity with firewalls, SIEM tools, or vulnerability management.
                • Strong analytical and incident-response skills.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • • Monitor security alerts, incidents, and system vulnerabilities.
                • Implement security policies, controls, and best practices.
                • Support audits, compliance, and risk assessments.
                • Train employees on cybersecurity awareness.
                • Respond to incidents and coordinate recovery efforts.

                Qualifications

                • Bachelor’s degree in IT, Cybersecurity, or related field.
                • 0–3 years in IT security; new graduates with relevant certifications are welcome.
                • Familiarity with firewalls, SIEM tools, or vulnerability management.
                • Strong analytical and incident-response skills.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • •  Design and optimize chemical, thermal, and/or mechanical industrial processes from concept through commissioning, ensuring safe, efficient, and compliant operations. Specify equipment, conduct risk assessments, and resolve process issues, while scaling and improving manufacturing workflows, tools, and quality standards to enable reliable, cost-effective production aligned with project objectives.Must have skills : Network Security OperationsGood to have skills : NAMinimum 3 Year(s) Of Experience Is RequiredEducational Qualification : 15 years full time educationSummary: We are seeking a skilled Network Engineer with strong expertise in network infrastructure and security technologies. The ideal candidate will be responsible for designing, implementing, and maintaining network systems to ensure high availability, security, and performance.. Roles & Responsibilities: – Design, configure, and maintain network infrastructure including firewalls, routers, switches, and load balancers. – Manage and troubleshoot firewall platforms such as Cisco ASA, Fortinet, and Palo Alto. – Implement and support routing and switching solutions for enterprise networks. – Configure and optimize load balancers (Citrix NetScaler, F5) for application delivery and high availability. – Develop and maintain network automation scripts using Python and Ansible to streamline operations. – Monitor network performance, identify bottlenecks, and implement solutions to improve reliability and security. – Collaborate with cross-functional teams to integrate network solutions with cloud platforms (AWS, Azure, Google Cloud, OCI). – Ensure compliance with security standards and best practices. Professional & Technical Skills: – Hands-on experience with firewall technologies: Cisco, Fortinet, Palo Alto. – Strong knowledge of routing and switching protocols (BGP, OSPF, VLAN, STP). – Expertise in load balancer configuration (Citrix NetScaler, F5). – Proficiency in network automation tools: Python, Ansible or any other tool. – Familiarity with cloud networking concepts (AWS, Azure, Google Cloud, OCI) – added advantage. – Excellent troubleshooting and problem-solving skills. – Strong communication and documentation abilities. Additional Information: – The candidate should have minimum 5 years of experience in Network Security Operations. – Relevant certifications (CCNP, Fortinet NSE, Palo Alto PCNSE, F5 Certified, Netscaler or any Cloud & Automation Certification) preferred – This position is based at our Gurugram office. – A 15 years full time education is required., 15 years full time education

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • • • Minimum 5 years overall experience in DCS/PLC/SCADA/Field instrument diagnostics & troubleshooting. Yokogawa experience in DCS/PLC preferred.
                  • Experience in Industrial/Process Automation
                  • Qualification required is BE/B.Tech in Instrumentation /Electronics.

                  Skills and Competency : 1.Knowledge of DCS,PLC,SCADA and control systems and components used in Industrial automation domain.

                  • Knowledge of DCS, PLC, Field instruments diagnostics & troubleshooting
                  • Experience in Yokogawa DCS /PLC System an added advantage.
                  • Knowledge of data communications protocols, networking equipment and computer operating systems such as Windows
                  • Maintenance and service experience in Industrial automation domain.

                  Job Role : Maintenance /Resident support engineer as per mandatory contractual obligations from customer (HMEL/IOCL/GAIL/BPCL Petroleum Refineries). Customer has awarded us resident support contract for maintenance of Yokogawa system at plant. Strong possibility of renewal of contract based on service execution & customer satisfaction index.

                  Key Responsibilities : 1.Maintain DCS,PLC,HMI,SCADA control systems and components

                  • Provide appropriate and timely reports/technical advice on matters relating to systems under scope of work and services.
                  • Carry out day to day duties in accordance with daily job schedule.
                  • Carry out day to day duties in accordance with safety principles, corporate values, Quality policies and strategies.
                  • Day to day interaction with customers, regional and head office of YIL.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

The Senior Consultant II will provide technical expertise on project tasks to ensure quality services are delivered on schedule and within the available budget to meet customer requirements. This includes providing frequent updates to the project manager. As part of a project team, Senior Consultant II will maintain relationships with clients and key decision makers to help identify new business opportunities.

What You Will Do:

• Provide cybersecurity expertise on project tasks to ensure quality services are delivered on schedule and within available budget to meet customer requirements and provide frequent updates to the project manager
  • Assist project manager with defining and sequencing project tasks, estimating task duration and developing a project schedule as part of developing a project management plan
  • Review project management plans to understand the scope, schedule and assigned work authorization
  • Plan and schedule client meetings
  • Participate in client and project team meetings
  • Assist with research and data analysis, including assisting with conducting customer or stakeholder analyses.
  • Prepare written documents, reports, and presentations
  • Develop conclusions and recommendations, draft reports, and assist with client presentations
  • Assist with giving oral presentations to clients
  • Track and report hours spent executing projects
  • Collaborate with individuals at all levels, provide input to reports and other deliverables, execute multiple assignments, meet agreed deadlines, and adjust to changing client demands
  • Perform quality assurance on project deliverables
• Develop relationships with existing customers to facilitate development of new business opportunities for current and/or additional services
  • Learn, understand and be conversant in ABS Consulting cybersecurity products and services, including ISA/IEC 62443 industrial cybersecurity, NIST Cybersecurity Framework implementation, Zero Trust architecture, and OT/IT convergence consulting
  • Meet with new and existing clients and actively listen to their needs
  • Communicate client  needs to project managers and supervisors, to include emerging threats, regulatory changes, and security technology requirements
  • Review published reports and news articles about existing and potential new clients to identify customer intelligence
  • Participate in proposal development, including writing proposals
• Represent ABS Consulting and participate in promoting our products and services
  • Participate in marketing activities, conference presentations, technical whitepapers
  • Networking to meet new potential clients
• Must be willing and able to travel 50% or more of the time as necessary to meet business needs.

What You Will Need:

Education and Experience

• Must have a bachelor’s degree or equivalent experience
• 8+ years of relevant professional experience
• Ability to obtain Security Clearance required.

Knowledge, Skills, and Abilities

• Ability to gain, retain, comprehend, and transfer knowledge to other members of the team.
• Ability to mentor/coach entry-level consultants and hone technical skills in others.
• Ability to actively listen to the needs of our clients by receiving shared information and determine context of the information provided and generating probing questions to better understand, retaining the information for future access, engaging and collaborating with sales team on potential opportunities, and responding with solutions.
• Ability to utilize established rapport and role as a subject matter expert with existing clients to facilitate development of new business.
• Ability to coach others on development of customer intimacy and new opportunities
• Must understand departmental goals and holds self and team members accountable for keeping commitments and high standards. Uses Root Cause Analysis to improve performance
• Demonstrate a proficient level of time management skills
• Ability to obtain a working knowledge of the ABS Health, Safety, Quality and Environmental Management System

Salary Range: $115-120k

Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• Hand on experience in conducting on-site and remote Security Risk assessment of factories.
• Strong understanding and application knowledge of IEC 62443 and NIST 800-82 frameworks for OT Security assessment and Risk scoring.
• Design, configure, assess, deploy, and integrate Factory Security solutions.
• Deploying Factory security initiatives and maintaining the delivery of aligned cyber security as per targets.
• Understanding of the customers connectivity at shop floor systems and machines. Such as PLC’s, HMI, Computer Systems.
• Developing and implementing comprehensive security strategies and solutions specifically tailored for Factory systems, networks, and associated components.
• Ability to conduct assessments and audits as well as hands on setting up systems as part of an implementation.
• Staying current with NIST OT/IIoT/IoT and other Factory security focused publications.
• Working knowledge of security risk and control frameworks such as NIST CSF
• Analyzing and resolving cyber risks in the Factory environment. This involves monitoring and analyzing security logs and alerts from Factory systems to identify and respond to security incidents.
• Provide consultancy advice to client in closing technology control gaps / vulnerabilities in a practical way.
• Be able to liaise and work closely with clients across multiple customers and handle stakeholder expectations.
• Define security architecture, technical solutions and organizational measures in order to reduce the level of cyber risk.

Profile Description:

• Bachelor’s degree in electronics, Information Technology, Computer Science or related field with 5-8 years of total experience and minimum of 2-5 years’ work experience in Factory (ICS/OT) Security.
• Strong understanding of industrial control systems (ICS) and Operational technology (OT) environments, including knowledge of various protocols, architectures, and components used in critical infrastructure sectors.
• Strong risk and change awareness, not only from a security perspective but just as well from a plant production perspective.
• Hands-on experience in OT Security risk assessments, designing, implementing Factory (ICS/OT) network architectures, Network Segmentation, Malware Protection, Vulnerability Management, patch management, Factory Asset Management, Logging and Monitoring, etc.).
• Must be proficient with design and deployment of Security monitoring architecture for ICS networks and related products like Armis, Nozomi, Claroty, Dragos, Tenable etc.
• Strong knowledge of ISA Purdue Model, ISA 62443 Standard Family/NIST 800:82/SANS 20 controls framework/additional guidelines or frameworks related to Factory Security.
• Solid knowledge of industrial networking protocol security IEC 104, Modbus, OPC, Profibus, Vendor Specific Protocols etc.
• Knowledge of Cyber Security tools (such as EDR / EPP, SIEM / SOAR, Firewalls, IDS / IPS, Secure Remote Access, Switching & Routing etc.).
• Being in possession of any security certificate (e.g ISA 62443, GICSP, CISSP)
• Familiarity with the MITRE ICS ATT&CK Framework.
• Additionally, adapt project management abilities and task prioritization to ensure successful project outcomes within defined timelines.

Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• We are seeking an experienced Manager / Senior Manager – OT Security to lead and strengthen our Operational Technology (OT) cybersecurity program. The role is responsible for securing industrial control systems (ICS), driving OT security strategy, managing risk, and ensuring resilience across industrial environments while collaborating with operations, engineering, IT, and leadership teams.Key ResponsibilitiesLeadership & Strategy
  • Lead and manage the OT security function, including strategy, roadmap, and execution
  • Act as a key advisor to leadership on OT cyber risk, safety, and resilience
  • Drive IT–OT security convergence and enterprise alignment
  • Lead and mentor OT security teams and cross-functional stakeholders

  OT Security Program Management

  • Own the end-to-end OT security program, including governance, risk, and compliance
  • Conduct and oversee OT risk assessments, threat modeling, and remediation initiatives
  • Define and track OT security KPIs, KRIs, and maturity metrics
  • Oversee OT vulnerability management and incident response
  • Manage third-party and vendor risk in OT environments

  Architecture & Engineering Oversight

  • Oversee secure design and implementation of OT/ICS security architectures
  • Guide network segmentation, firewalls, DMZs, and secure remote access for OT systems
  • Review and approve security designs for SCADA, DCS, PLC, RTU, and IIoT environments
  • Evaluate and govern OT security tools and platforms

  Compliance & Governance

  • Ensure compliance with IEC 62443, NIST 800-82, ISO 27001, and relevant regulations
  • Lead internal and external audits and regulatory assessments
  • Develop and maintain OT security policies, standards, and procedures
  • Support cyber resilience, disaster recovery, and business continuity planning for OT systems

  Stakeholder & Vendor Management

  • Partner with plant operations, engineering, IT, and business teams
  • Manage OEMs, system integrators, and security vendors
  • Support RFPs, solution evaluations, and contract reviews

  Required Skills & Experience

  • 6+ years of experience in OT / ICS / Industrial Cybersecurity
  • Proven experience in managing or leading OT security initiatives
  • Strong understanding of SCADA, DCS, PLCs, RTUs, HMIs, and industrial networks
  • Knowledge of industrial protocols (Modbus, DNP3, OPC, Profinet, EtherNet/IP, BACnet)
  • Hands-on expertise in OT network security, segmentation, firewalls, and monitoring
  • Strong understanding of OT threat landscape and incident response

  Preferred Qualifications

  • Certifications: GICSP, CISSP, CISM, IEC 62443, CRISC
  • Experience with OT security tools (e.g., Nozomi, Claroty, Dragos, Tenable.ot, Forescout)
  • Experience in manufacturing, energy, utilities, oil & gas, or critical infrastructure
  • Exposure to multi-site or global OT environments

Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• In this role, you will have the opportunity to be accountable to deliver and orchestrate the delivery of Information Systems (IS) service line operations activities. Each day, you will coordinate with and supervise internal and/or external third-party supplier resources for the effective delivery and operational performance of the services in scope. You will also showcase your expertise by ensuring continuous improvement and compliance.The work model for the role is:This role is contributing to the Security Risk and Compliance Organization Globally. Main stakeholders are Security teams, Information Systems teams across global services and business areas.You will be mainly accountable for:
  • Fulfilling the service requests in the agreed Service Level Agreements (SLAs) and collaborating with IS Service Owner to define the domain service catalog.
  • Reviewing SLAs and corresponding service monitoring and controlling metrics to identify rightsizing opportunities.
  • Dedicating resources to monitor problem volumes, Root Cause Analysis (RCA) quality, solution timelines, and following up on potential improvement opportunities.
  • Deploying and operating the OT-IDS Solutions (e.g. Claroty, Nozomi) and tooling as part of our OT Security services across ABB. This includes OT Asset Management, OT Vulnerability Management and OT Incident Reporting. While these services are not business critical as in downtime directly impacting our production, but it does impact on our OT Security visibility.
  • The focus of this position is on the technical aspects of service operations e.g. OT-IDS operations.
  • Driving the technical support of onboarding of new sites, this includes the onsite deployment of the OT-IDS sensors integration in the central management console.
  • Keeping the OT-IDS Solutions operational and address any issues that operationally can impact the solutions, their operations as well as the site in which they are deployed.
  • Driving the support to users of these OT-IDS Solutions with any reported issues, change requests or other faced challenges.

  Qualifications for the role:

   

  • 10+ years of experience, with relevant OT security experience of 5 years.
  • Bachelor’s degree in Computer Science or related field (preferred).
  • Certifications required: ITIL Foundation, OT-IDS (Claroty, Nozomi or similar) technical certifications.
  • Certifications preferred: CISSP, GICSP, IEC62443 related certifications.
  • Strong global experience, especially in collaborating with distributed teams on security topics.
  • Excellent communication and presentation skills, possessing confidence when engaging senior stakeholders.

Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• 1. Implementation & Strategy
  • Scoping & Inventory: Define the System Under Consideration and lead automated/manual asset discovery across Level 0 to Level 4 of the Purdue Model.
  • Risk Assessment: Lead High-Level and Detailed Risk Assessments to determine Security Level Targets (SL-T) for critical processes.
  • Zoning & Segmentation: Design and implement Zones and Conduits to logically and physically isolate critical assets.
  • Countermeasure Deployment: Select and oversee the installation of industrial firewalls, IDS/IPS, and secure remote access solutions tailored for OT protocols.

   

  2. Auditing & Compliance

  • Gap Analysis: Perform comprehensive audits against ISA/IEC 62443-2-1 (Security Programs) and 3-3 (System Requirements).
  • Technical Validation: Conduct onsite witness testing to verify that Security Level Achieved matches the Target Security Level.
  • Supply Chain Audit: Evaluate the security capabilities of third-party system integrators and equipment vendors.

  B. Required Technical Competencies:

  1. Engineering & Automation

  • Expertise: Deep knowledge in ICS, SCADA, PLCs, DCS, HMIs, and SIS (Safety Instrumented Systems) from vendors like Siemens, Rockwell, or Honeywell.
  • Industrial Protocols: Fluency in non-IT protocols including Modbus, Profinet, EtherNet/IP, OPC-UA, and DNP3.
  • Functional Safety: Understanding the relationship between Cyber Security and Functional Safety (SIL ratings).
  • Year of Experience: 8+ years

  2. Cybersecurity & IT

  • Network Security: Expertise in VLANs, DMZs, and the implementation of jump hosts for secure ICS / Operational Technology maintenance.
  • IT and Plant Convergence: Knowledge of how to securely route data from the plant floor to Enterprise Resource Planning systems without exposing the IACS to the public internet.
  • Vulnerability Management: Ability to manage Patch vs. Protect decisions for legacy industrial equipment.
  • Year of Experience: 8+ years

  C. Education & Certifications

  • Education: Masters or Bachelor’s degree in Electrical Engineering, Automation & Control, or Computer Science.
  • Mandatory Certificates:
  • ISA/IEC 62443 Certified
  • ISA/IEC 62443 Lead Implementer or Auditor.
  • Preferred Certificates:
  • Global Industrial Cyber Security Professional
  • ITIL, MCSE/Azure, Cisco, Dragos, CISSP or CISA

Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• Overseeing the overall technical solution that meets customer Requirement based on reference Solution.This Includes The Following Actives
  • Responsible for leading overall requirement, design, implementation, and testing of digital control system of the HVDC Control & Protection system this includes network &Cybersecurity design
  • Lead the configuration of IEC61850 IED’s via vendor specific tools and System Configuration Tools for complete system integration.
  • Lead the generation of Substation Configuration description Language (SCL) files for system integration.
  • Knowledge of Sequencing & interlocking principles used in substation automation systems and their implementation on IEC61850 IED’s.
  • Lead the design, configuration and testing required to deliver on time and within defined budgets the HVDC Control System hardware.

  Lead the testing and debugging of complex IEC61850 communication systems using industry standard tools such as IED SCout, Wireshark etc.

  • Good experience with HMI/SCADA technologies, implementation, testing and installation.
  • Coordinate and interface the HVDC Control System with Balance of Plant equipment and SCADA systems.
  • Define the main IO Lists of the control system.
  • Analyze signal interfaces and ensure compatibility with the control system.
  • Lead in collaboration with NPI teams, the configuration of Remote Terminal Units (RTU), Bay Controllers (BCU) and Merging Units for signal acquisition in digital substation environments.
  • Lead the design of LAN networks/Communication Architectures and configuration of industrial ethernet switches/routers and satellite clocks
  • Follow the departments standard design practices, engineering reviews and guidelines.
  • Define Control Panel requirements and produce detailed design documentation for thecontrol system using standard design blocks under the guidance of lead engineers.
  • Panel Electrical Schematics (using Engineering Base tool)
  • Wire/Cable Schedules
  • Routine Test specification
  • General Assembly drawings & BOM

  Overseeing FAT

  Required Qualifications

   

  • Degree in Electronics/Electrical engineering or related field.
  • Strong background in configuring Substation Bay Controllers/Merging Units/ IEC61850 IED’s/HMI/SCADA technologies.
  • Minimum of 6 – 10 years’ experience in control and protection system design
  • Knowledge of industrial communication networks such as IEC61850 and Ethernet based protocols.
  • Control & Protection Relay logics Design techniques
  • Experienced in developing electrical designs for industrial control systems
  • Knowledge of communication networks Security/Hardening and Cybersecurity best practices
  • Excellent knowledge of commonly used Layer2&3 protocols such as Ipv4, OSPF, LACP, DMZ,VPN/ DMS/ADMS/ DNP, IEC, Modbus
  • Experience relevant to electrical power systems and Substation automation engineering
  • Working knowledge of industrial and utility electrical control and protection systems and Digital Control Systems, Substation Automation and SCADA

  Desired Characteristics

   

  • Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Ability to document, plan, market, and execute programs. Established project management

  skills.

  • Proven technical leadership in a complex system engineering development environment

  Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in

  experts when needed

Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• In this role, you will have the opportunity to execute service work with low to medium complexity as per work instructions and in accordance with ABB standard processes, quality standards, and safety guidelines. Each day, you will plan and execute work on a first-time right approach with customers. You will alsoshowcase your ability by displaying a clear understanding of care in your own area of responsibility.The work model for the role is: – OnsiteThis role is contributing to the Automation – Energy division in Faridabad, India region.You will be mainly accountable for:
  • Delivered on-site and remote service support for ABB 800xA Automation Systems in the Oil, Gas & Chemical industry, including diagnosing problems, issue resolution, and field service of medium to high complexity.
  • Identified technical issues and improvement opportunities during customer interactions, conducted root cause analysis and recommended corrective and preventive actions.
  • Supported brownfield service bids by providing technical authority and solutioning support during the proposal phase, including customer presentations.
  • Ensured service readiness by preparing material lists and coordinating the availability and quality of parts, tools, and equipment.
  • Promoted a culture of continuous improvement by documenting best practices, tracking site issues, and implementing improvements to enhance field service quality and profitability.
  • Maintained high standards of safety and customer communication, ensuring safe execution of work and consistently improving customer satisfaction.

  Qualifications for the role:

   

  • Possess 2–10 years of practical experience in service engineering for ABB Symphony or 800xA systems within the Oil, Gas & Chemical industry.
  • Extensive background in process control and instrumentation across various process plants, With solid skills in DCS hardware & application engineering, HMI, library development, third party communication, testing, and commissioning.
  • Demonstrated proficiency in ABB System 800xA (minimum 2 years); knowledge of other ABB Systems like Freelance and communication protocols such as Profibus, Modbus, and OPC.
  • Skilled in executing brownfield DCS projects including application modifications, retrofits, controller migrations, and on-site commissioning.
  • Exposure to cybersecurity solutions, virtualization, and digital technologies.
  • Full-time diploma or degree holder in Electrical, Electronics, or Instrumentation Engineering
  • Capable of effective communication in English (written and verbal).

Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• In this role, you will have the opportunity to act as commissioning lead for high complex projects. Each day, you will ensure completion of all commissioning activities effectively and cost-efficiently and in accordance with contract specifications, quality standards, safety requirements, and cybersecurity policies and standards. You will also showcase your expertise by providing technical solutions to meet current and emerging business and customer requirements.The work model for the role is:This role is contributing to the Robotics & Discrete Automation in Bangalore & Pune, India.You will be mainly accountable for:
  • Design, develop, and customize PLC programs using Ladder Logic, Structured Text, and other IEC 61131-3 languages for various machinery and production lines.
  • Integrate PLCs with sensors, actuators, HMIs, SCADA systems, and ensure seamless communication using industrial protocols like Modbus, Profibus, and Ethernet/IP.
  • Perform on-site commissioning, testing, troubleshooting, and maintenance of PLC-controlled systems; travel up to 80% across India based on project requirements.
  • Prepare and maintain technical documentation including wiring diagrams, program logic, user manuals, and operating guides using MS Office tools.
  • Collaborate with cross-functional teams and ensure compliance with safety standards while coordinating with vendors and customers for timely support and delivery.

  Qualifications For The Role

   

  • Diploma or Bachelor’s degree in Mechanical or Production Engineering
  • 6–12 years of experience in Bodyshop/Chassis shop installation and commissioning, preferably in automotive or automation industries
  • Strong expertise in handling Spot-Welding jigs, Arc welding fixtures, Roller hemming fixtures, with sound knowledge of BIW processes
  • Proficient in PLC programming using Ladder Logic, Structured Text, and Function Block Diagram (FBD)
  • Hands-on experience with PLC platforms such as Siemens (TIA Portal, Step 7), Allen-Bradley (RSLogix, Studio 5000), and Mitsubishi
  • Skilled in HMI/SCADA development using tools like Wonderware, WinCC, and Ignition
  • Familiarity with industrial communication protocols including Modbus, Profibus, Ethernet/IP, OPC UA, and CANopen
  • Strong electrical knowledge including reading schematics and working with sensors, actuators, relays, and motor controls

Apply / Know more …

Job Description

The IT/OT Solution Architect will be responsible for designing and implementing robust architectures that integrate Information Technology (IT) and Operational Technology (OT) systems within our manufacturing environment. This role ensures seamless connectivity between enterprise systems and shop-floor technologies, driving efficiency, security, and scalability across operations.

Key Responsibilities

• • Works independently & is fully proficient in applying established standards of P&E role
  • Collaborate with cross-functional teams to gather project requirements
  • Must possess good analytical skills in order to have clear understanding of the requirement and converting the requirement into proposal with accurate costing.
  • Estimator needs to work and coordinate with Sales Management, Service Operation Leaders (SOL), LSS Leaders (FSM/SBM), LSS Marketing / Solutions Consultants, Field Service Specialists (FSS) in making the proposal / estimate.
  • Identify 3rd party Packages / Equipment / Buyout items and engage Procurement to obtain sub-vendor Technical and Commercial offers
  • Identify Packages / Equipment from other Business Units, i.e. Advanced Solutions, Cyber Security, etc. and engage the proper BU to obtain Technical and Commercial offers.
  • Ensure that requests are executed within agreed cycle time
  • Be proactive in all areas of work and escalate issues (Customer or internal) to the appropriate person in a timely manner
  • Ensures that the final deliverable meets the functional specifications of the end user by doing thorough Level 1 quality checks.
  • Follow the Quality standards and processes as defined by Internal global business operations.
  • Develop a clear understanding of assigned contract base and potential growth areas
  • Follow Standard Operating Procedures, Process flow charts, Quick Reference Documents, Checklists etc.
  • Updation of request status in SFDC and update the other metrics pertaining to the requirement from LOB.
  • Ensure that a Proposal Plan is prepared as per the SOP’s, which should also include all resources, responsibilities, deliverables and dates, for all proposal team members.

  Desired Outcomes Or Results

   

  • Submission of Proposal package within agreed cycle time
  • The quality of deliverables as per documented norms and standards
  • Problem solving, clear the way when team members face a technical problem/bottleneck
  • Adherence to Honeywell best practices and processes
  • Contribution towards process improvement

  Position Capability Matrix (PCM)

  PCM contains the optimum skill level required to be possessed by the incumbent for the position. This is an indicative representation for the current year and may undergo change based on business and performance needs in the future.It’s not expected that the candidate should have all the skills below but should demonstrate combination of different skills.

  No.

  Skill Expected Level

  Technical Skills

  Proposal & Estimation Development Skills Mandatory

  Honeywell/3 rd Party DCS knowledge (Hardware and Software)

  Project Documentation (FDS, DDS, Cabinet GA etc.)

  Basic Networking Concepts

  FAT, SAT, and Commissioning Desirable

  Third Party DCS / PLC System

  Business/Domain/Tools Skills

  Technical Writing Mandatory

  MS Office

  Sales Estimation tools (OPB,CPQ, eGAP etc.) Desirable

  Project management – planning & tracking

  Behavioral Skills

  Verbal communication Mandatory

  Written communication

  Ability to learn new technologies

  Team work Desirable

  Qualifications

  BE/B.tech : Instrumentation and Control/Electronics and Telecommunication

Job Description

The IT/OT Solution Architect will be responsible for designing and implementing robust architectures that integrate Information Technology (IT) and Operational Technology (OT) systems within our manufacturing environment. This role ensures seamless connectivity between enterprise systems and shop-floor technologies, driving efficiency, security, and scalability across operations.

Key Responsibilities

• • • Experience with digital solutions in process automation, such as SCADA, PLC, and industrial communication protocols like Modbus, OPC UA
    • Knowledge on the programming languages (Functional Block, Structure Text) for DCS configuration and control
    • Configuration, Runtime and diagnostic of the Eco Structure Foxboro DCS
    • Configuration of AVEVA System Platform & HMI
    • Strong understanding of system interactions and integration testing methodologies.
    • Knowledge on security Testing
    • Experience with debugging tools and troubleshooting techniques

    Key Responsibilities:

    • Design and execute effective test cases, scripts, and environments for thorough integration testing of DCS systems
    • Identify, analyze, and resolve integration issues and defects to ensure system reliability.
    • Collaborate with developers, stakeholders, and other testers to ensure clear understanding and efficient communication
    • Automate test cases to improve efficiency and repeatability
    • Work with various testing tools and debugging frameworks to validate system performance.
    • Ensure compliance with industry standards and best practices in process automation and system integration

    Required Industry Experience:

    • Strong understanding of Distributed Control Systems (DCS), including architecture, functionality, and applications in industries like oil and gas, chemical, and power
    • Familiarity with process automation principles, including control loops, instrumentation, and automation strategies
    • Hands-on experience in the design, implementation, and troubleshooting of DCS systems
    • Knowledge of Schneider Electric’s product portfolio, particularly Foxboro DCS and EcoStruxure Automation Expert, is a plus

Job Description

The Senior Building Automation Systems Engineer will be responsible for the design, implementation, commissioning, and maintenance of complex building automation systems for our commercial and industrial clients. This individual will serve as a technical lead on projects, driving innovation and providing expert guidance to both team members and clients.

Key Responsibilities:

• Design & Engineering:
  • Develop and review detailed designs, including system architecture, electrical schematics, and control logic, for building automation projects.
  • Select appropriate Building Automation Controls Systems (BACS)- former defined as Direct Digital Control (DDC) hardware, field devices (sensors, actuators), and network components to meet project requirements and industry standards.
  • Ensure designs comply with all relevant codes, including ASHRAE, LEED, BREEAM, Green Globals and local building codes.
• Programming & Commissioning (Cold and Hot):
  • Program and configure BAS controllers and front-end user interfaces for systems like HVAC, lighting, and access control. (only as add on/nice to have)
  • Perform on-site commissioning and start-up to ensure systems are installed and functioning correctly according to the design specifications.
  • Perform point-to-point checks, calibrate field devices, and optimize system performance.
• Integration & Networking:
  • Integrate various low-voltage building subsystems using standard industry protocols.
  • Utilize BACnet (SC), Modbus, OPC-UA and other relevant communication protocols for seamless system communication.
  • Set up and configure TCP/IP networks for building automation, including managing network security and access.
• Troubleshooting & Support:
  • Serve as the primary technical resource for complex issues related to controls, electrical systems, and network communication.
  • Provide remote and on-site support to diagnose and resolve software and hardware problems.

Required Technical Skills & Tools:

• Building Automation Software: Expert-level proficiency with major BAS platforms, including but not limited to:
  • Johnson Controls Metasys
  • Siemens Desigo CC / Apogee
  • Tridium Niagara Framework
  • Honeywell Spyce / Trend
  • Automated Logic WebCTRL
  • Schneider Electric EcoStruxure
  • Emmerson Delta-V
• Programming Languages & Protocols:
  • Experience with control logic programming and various scripting languages.
  • Expertise in BACnet (SC), Modbus, OPC-UA and other industrial communication protocols (e.g. PROFINET).
  • Familiarity with web technologies (e.g., HTML, JavaScript) for user interface customization.
• Design & Engineering Tools:
  • Proficiency in AutoCAD for reviewing and modifying control drawings and schematics.
  • Familiarity with building information modeling (BIM) is a plus
• Networking:
  • Knowledge of TCP/IP networking, subnetting, and network security concepts.
• Field Tools:
  • Proficiency with diagnostic tools, including multimeters, temperature probes, and network analyzers.

We are known for our extraordinary people who make the impossible possible every day. Questians are driven by hunger, humility, and aspiration. We believe that our company culture is the key to our ability to make a true difference in every industry we reach. Our teams regularly invest time and dedicated effort into internal culture work, ensuring that all voices are heard.

We wholeheartedly believe in the diversity of thought that comes with fostering a culture rooted in respect, where everyone belongs, is valued, and feels inspired to share their ideas. We know embracing our unique differences makes us better, and that solving the worlds hardest engineering problems requires diverse ideas, perspectives, and backgrounds. We shine the brightest when we tap into the many dimensions that thrive across over 21,000 difference-makers in our workplace.

Work Experience

• Minimum of 8 years of progressive experience in the design, programming, and commissioning of building automation systems.
• Proven track record of successfully leading complex BAS projects from start to finish.
• Strong analytical, problem-solving, and critical-thinking skills.
• Excellent verbal and written communication skills with the ability to explain complex technical concepts to non-technical stakeholders.
• Industry certifications (e.g., from an OEM, Professional Engineering license) are highly desirable.

Job Description.

• Design, configure, and maintain instrumentation and control systems including DCS, PLC, and SCADA platforms across upstream and downstream operations.
• Lead IT/OT integration projects, ensuring secure and reliable data exchange between operational systems and enterprise platforms.
• Implement and support Manufacturing Execution Systems (MES) to enhance production monitoring, traceability, and operational efficiency.
• Develop and maintain network architectures for industrial environments, including VLAN configurations, firewall policies, and secure remote access.
• Collaborate with cross-functional teams to ensure seamless system integration between field devices, control systems, and cloud business applications.
• Support alarm management, system diagnostics, and performance optimization of control systems in compliance with safety and reliability standards.
• Ensure compliance with industry standards such as IEC 62443, ISA-95 and is aware of OT cybersecurity and architecture frameworks.
• Provide technical leadership and mentoring to junior engineers and technicians.

Required Qualifications:

• Bachelor’s degree in Instrumentation, Electrical Engineering, or related discipline.
• 7–8 years of experience in instrumentation, automation, and systems integration within the oil & gas industry.
• Hands-on experience with DCS/PLC systems (e.g., Emerson DeltaV, Honeywell Experion, Siemens PCS 7) and SCADA/HMI platforms.
• Strong understanding of MES systems, OPC UA, MQTT, and industrial communication protocols.
• Proficiency in networking fundamentals, including TCP/IP, VLANs, firewalls, and cybersecurity principles.
• Foundational knowledge of cloud platforms (Azure, AWS) and their application in industrial environments.
• Familiarity with ISA-95, IEC 62443.
• Excellent problem-solving, communication, and stakeholder engagement skills.

Preferred Skills:

• Experience with edge computing, IIoT platforms, and data historians.
• Exposure to cybersecurity assessments and compliance audits in OT environments.
• Certifications in ISA, Cisco, or cloud technologies are a plus.

Your future duties and responsibilities

Job Description.

• Key Responsibilities:1. Planning & Budgeting

  • Prepare and implement detailed micro plans ensuring availability of field instruments, DCS, SCADA, and PLC systems.
  • Prepare BOQ and cost estimation for instrumentation and automation schemes.
  • Develop bar chart plans with defined timelines for execution.
  • Provide technical support for existing plant DCS-related activities.
  • Review modification documents, datasheets, and ensure procurement and timely execution of modifications.
  • Monitor capital and operational expenditure to ensure alignment with approved budgets.

  2. Process Management

  • Coordinate and implement detailed engineering, procurement, expediting, and site execution for field instruments, DCS, SCADA, and PLC systems.
  • Provide critical inputs during Basic Engineering Package (BEP) and detailed engineering phases.
  • Review all technical documentation such as datasheets, MRs, enquiries, offers, TBA, drawings, and QAPs.
  • Coordinate stage-wise and final inspections to ensure timely delivery of materials to site.
  • Supervise erection and commissioning of field instruments, DCS, SCADA, and PLC systems.
  • Conduct root cause analysis for breakdowns and implement preventive measures.
  • Prepare drawings, isometrics, and manage material procurement to execute plant modifications with minimal production downtime.

  3. Quality Assurance

  • Execute SOPs for quality inspections and testing to ensure compliance with project and production requirements.
  • Verify material test certificates before approval and usage.
  • Ensure procurement of equipment from approved QA sources with necessary stage-wise inspections.
  • Implement “Right First Time” concept to avoid rework and maintain high-quality standards.
  • Ensure job completion, permit closure, and maintain good housekeeping after every task.
  • Develop inspection reports, testing documentation, and loop files related to executed work.

  4. Capitalization of Assets

  • Ensure capitalization of assets in coordination with the Accounts department.
  • Oversee billing and documentation of all contractor-related assets.

  Desired Candidate Profile:

  • Bachelor’s Degree / Diploma in Instrumentation Engineering, Electronics, or related field.
  • Hands-on experience with DCS, SCADA, and PLC systems (specific systems can be mentioned, e.g., Siemens, ABB, Honeywell, Yokogawa).
  • Strong knowledge of instrumentation engineering principles, automation systems, and process control.
  • Proven ability to manage multiple projects with cost and time optimization.
  • Excellent analytical, problem-solving, and communication skills.
  • Familiar with industry standards, safety procedures, and QA/QC practices.

  Desired Skills and Experience

  PLC, DCS, Refining technology,Instrumentation,Process Control,SCADA

Job Description.

• Key Responsibilities:1. Planning & Budgeting

  • • Subsea- or/and topside configuration of SAS-systems for oil production platforms
    • Server configuration
    • Database configuration
    • Configuration of communication protocols
    • Follow up vendors and vendor technical documentation and participate in test activities/FAT
    • Perform and complete engineering documents and data registers
    • Some travel may be required, including offshore installation

    Qualifications

    • Education: Bachelor or Master’s degree in relevant disciplines (Fresh graduates or soon to be graduates will be considered)
    • Programming knowledge
    • PLS configuration skills
    • Server and/or database configuration knowledge
    • Have good communication skills
    • Have a cooperative working attitude
    • Multidiscipline understanding
    • Ability to work independently as well as in team
    • Have a high loyalty to deadline and quality requirements
    • Communicate well in Norwegian/Nordic and English – both orally and in writing

    Applications will be evaluated continuously

    Language

    • English
    • Norwegian

    In Head Energy You Get

    • Permanent- or project employment with the best conditions.
    • Access to the industry´s most exciting job opportunities
    • Personal follow-up, mentoring and career guidance
    • A large variety of project opportunities
    • Good pension- and insurance schemes
    • A pleasant and positive work environment
    • Access to both specific and general courses.

Job Description.

• Key Responsibilities:1. Planning & Budgeting

  • • • Develop, test, and maintain PLC programs for various automation assembly stations (adhesive dispensing, assembly, conveyors).
      • Configure HMIs for operator interfaces, alarm handling, and machine diagnostics
      • Integrate robots, sensors, cameras, and actuators into unified control architecture.
      • Support installation, FAT/SAT, and on-site commissioning of automated systems.
      • Diagnose and resolve control issues, electrical faults, and software bugs quickly to minimize downtime.
      • Establish communication protocols (OPC-UA, Modbus, Profinet, Ethernet/IP) for seamless device interaction.
      • Configure data logging and ensure process traceability by linking PLC systems to MES/SCADA
      • Work closely with IT/MES teams to implement data exchange and production reporting.
      • Develop preventive maintenance programs for control systems
      • Continuously improve PLC/HMI code for better performance and reliability
      • Train technicians and operators on safe use of automated systems.

      Desired Qualifications: Required Qualification, Knowledge, and Experience

       

      • Bachelor’s degree in Electrical / Electronics / Instrumentation / Controls Engineering
      • 2–6 years of hands-on experience in PLC/HMI programming, control panel design, and system commissioning in manufacturing or automation industries
      • Strong in PLC programming (Siemens TIA Portal, Allen-Bradley Studio 5000, Mitsubhishi, Beckhoff TwinCAT).
      • HMI/SCADA configuration (Open source software’s, WinCC, FactoryTalk, Ignition, Wonderware).
      • Knowledge of communication networks and industrial protocols
      • Exposure to robotics and MES connectivity.
      • Understanding of electrical safety, control panels, and instrumentation
      • Analytical thinking, quick troubleshooting, teamwork, documentation discipline, and communication with cross-functional teams

Job Description.

• Key Responsibilities:1. Planning & Budgeting

  • Develop and configure PLC and HMI software in the Automation design field.
  • Read and review customer project documentation to ensure compliance and accuracy.
  • Program new functions and configure software as needed.
  • Conduct software testing using simulators and lab test hardware.
  • Create detailed documentation in accordance with Good Manufacturing Practice (GMP) standards.
  • Support acceptance tests and commissioning processes.
  • Collaborate closely with the Automation & Controls team to align with software engineering processes.
  • Travel within India and abroad to support software commissioning as required.
• QualificationsYour Profile / Qualifications
  • Degree in Electrical/Electronic/Instrumentation Engineering.
  • 3 to 5 years of experience in automation software design field.

  Technical Skills

   

  • Proficiency with Siemens PLC/HMI – TIA Portal.
  • Experience with Siemens WinCC.
  • Familiarity with Rockwell PLC/HMI – Studio 5000, FactoryTalk View.

  Personal Attributes

   

  • Strong ability to work collaboratively in a team environment.
  • Excellent communication skills for effective interaction with various stakeholders.
  • Willingness to travel for work assignments.

Job Description.

• Key Responsibilities:1. Planning & Budgeting

  • Responsible for demonstration on the Automation, Digital solutions, and Application software networking
  • Responsible for the Operational Perfection – timelines on the installing, trouble shooting, planned maintenance of the various automation and networking solutions towards all range of Single use, Downstream and other Equipment’s sold by Cytiva
  • Required to attend and close the breakdown and networking calls as per Cytiva Service Quality. Willing to stretch during the off hours and Holidays to meet Customer expectations
  • Encouraged to enforce to the Key Performance Index of Service Operation, encouraged to assist in growing the service business by selling the Networking AMC, Optirun installations and expansions & Automation solutions to the customers
  • Make the commercial offers for the service offerings and follow up also encouraged to collect the payments from the customers for the services rendered and solutions sold.

  Who You Are

   

  • Bachelor’s Degree in Electronics Engineering, Computer Science or related technological field. 6-8 years relevant work experience or more in Automation Electrical Design.
  • Previous experience working on end to end industrial Automation systems.and Expertise in development, supporting and troubleshooting programmable logic controller (PLC) programs and software with one of the following platforms: Allen Bradley, GE, Siemens PLC systems and platforms: DeltaV, WonderWare
  • Exposure to government regulated industries (GMP, GAMP). Full understanding of Automation h/w & related interfaces. Experience with 2D electrical computer aided design. Effective written and verbal communications skills.
  • Experience authoring and reviewing standard operating procedures, on-the-job-trainings, and other controlled documents. Experience in managing small to medium-sized projects and outside vendors and Required to attend and close the breakdown and networking calls as per CYTIVA Service Quality
  • Encouraged to enforce to the Key Performance Index of Service Operation, encouraged to assist in growing the service business by selling the Networking AMC, Optirun installations and expansions & Automation solutions to the customers

  It would be a plus if you also possess previous experience in:

   

  • Handling Lifesciences industry products for Handshaking, Interfacing and creating Automation environment.
  • Exposure in different topology with multiple OEM products in MES environment
  • Creating validation documentation and performing the IOQ and CSV

Job Description.

• Key Responsibilities:1. Planning & Budgeting

  Colortokens is seeking a Senior Manager – OT SOC Services to oversee both the technical and commercial aspects of our Operational Technology (OT) Security Operations Center (SOC) services provided to customers. This role requires a strong background in OT cybersecurity, SOC operations, service delivery, and commercial management to ensure high-quality security services while optimizing revenue and customer satisfaction.

  The ideal candidate will have deep expertise in ICS/SCADA security, threat detection, incident response, SIEM/XDR for OT environments, and experience managing P&L, customer contracts, and service-level agreements (SLAs).

  Key Responsibilities:

  1. Technical Leadership & SOC Operations

  • Oversee the 24/7 OT SOC operations, ensuring robust threat detection, monitoring, and response for industrial environments.
  • Ensure security monitoring and incident response cover ICS/SCADA, IIoT, PLCs, and DCS environments.
  • Lead deployment, optimization, and integration of security tools such as SIEM, XDR, IDS/IPS, and anomaly detection in OT networks.
  • Develop incident response playbooks, threat-hunting strategies, and MITRE ATT&CK for ICS-based security detections.
  • Collaborate with CISOs, security architects, and industrial operations teams to ensure compliance with industry standards (IEC 62443, NIST 800-82, NERC-CIP, etc.).

  2. Commercial & Business Management

  • Manage financial health of OT SOC services, ensuring cost efficiency and revenue growth.
  • Develop and manage commercial contracts, pricing models, and SLAs for OT SOC customers.
  • Engage in pre-sales activities, working with sales and business development teams to design customized OT security solutions.
  • Ensure customer satisfaction by delivering monthly/quarterly service reviews, performance reports, and security recommendations.
  • Identify upsell and cross-sell opportunities for additional security services, such as Managed XDR, Threat Intelligence, or Incident Response Retainer.

  3. Customer & Stakeholder Engagement

  • Act as the primary point of contact for key customers, ensuring high-quality service delivery.
  • Collaborate with industrial plant operators, IT/OT security teams, and regulatory bodies to address cybersecurity risks.
  • Present threat intelligence reports, risk assessments, and incident trends to executive stakeholders.
  • Drive continuous improvement initiatives based on customer feedback and security landscape changes.

  4. Compliance & Risk Management

  • Ensure OT SOC operations comply with regulatory and industry standards (IEC 62443, NIST 800-82, NERC-CIP, GDPR, etc.).
  • Work with risk management teams to assess vulnerabilities and mitigate cyber risks in industrial environments.
  • Ensure log management, forensic analysis, and threat detection align with regulatory requirements.

  5. Required Skills & Experience:

  Technical Expertise:

  • 8-12 years of experience in cybersecurity in OT security & SOC operations.
  • Deep understanding of ICS/SCADA security, industrial protocols (Modbus, DNP3, OPC, BACnet, etc.), and OT network security.
  • Hands-on experience with OT SIEM/XDR platforms (e.g., Nozomi Networks, Dragos, Palo Alto Cortex XDR, Microsoft Sentinel for OT).
  • Experience with firewalling, micro-segmentation, anomaly detection, and intrusion detection in OT environments.
  • Strong knowledge of threat intelligence, MITRE ATT&CK for ICS, and incident response in industrial environments.

  Commercial & Business Acumen:

  • Experience in pricing models, and contract negotiation for managed security services.
  • Strong understanding of SOC service delivery models (MSSP, MDR, Co-Managed SOC, etc.).
  • Ability to drive revenue growth through service enhancements and customer expansion strategies.

  Leadership & Soft Skills:

  • Proven experience in leading large security teams, SOC analysts, and incident responders.
  • Strong customer engagement, relationship management, and executive communication skills.
  • Ability to bridge the gap between technical cybersecurity teams and business stakeholders.

  Preferred Certifications:

  ✔ CISSP (Certified Information Systems Security Professional)
  ✔ GICSP (Global Industrial Cyber Security Professional)
  ✔ CISM (Certified Information Security Manager)
  ✔ ISA/IEC 62443 Certifications
  ✔ SIEM/XDR Vendor Certifications

Job Description.

• Key Responsibilities:1. Planning & Budgeting

  Colortokens is seeking a Senior Manager – OT SOC Services to oversee both the technical and commercial aspects of our Operational Technology (OT) Security Operations Center (SOC) services provided to customers. This role requires a strong background in OT cybersecurity, SOC operations, service delivery, and commercial management to ensure high-quality security services while optimizing revenue and customer satisfaction.

  The ideal candidate will have deep expertise in ICS/SCADA security, threat detection, incident response, SIEM/XDR for OT environments, and experience managing P&L, customer contracts, and service-level agreements (SLAs).

  Key Responsibilities:

  1. Information Security Governance & Policy Management:

   

  • Define, develop, implement, and continuously improve information security policies, standards, procedures, and guidelines.
  • Own and maintain the Information Security Management System (ISMS) aligned with ISO 27001.
  • Establish governance frameworks to ensure consistent security implementation across:
  • Corporate IT
  • Product engineering
  • Cloud infrastructure
  • Manufacturing/plant environments (IT/OT)
  • Ensure alignment with ISO 27001, SOC 2, PCI DSS, GDPR, and client-specific security requirements.
  • Act as the primary point of contact for information security governance across business units.

  
  2. Risk Management, Compliance & Audit Ownership:

   

  • Conduct periodic enterprise risk assessments, threat modeling, and vulnerability assessments across IT, cloud, product, and plant systems.
  • Maintain and continuously update:
  • Risk registers
  • Asset inventories
  • Control matrices
  • Compliance dashboards
  • Lead and independently manage:
  • ISO 27001 certification and surveillance audits
  • SOC 2 Type I & II audits
  • PCI DSS compliance assessments
  • Client and partner security audits
  • Coordinate audit schedules, evidence collection, documentation, and stakeholder interactions.
  • Track, manage, and ensure timely closure of non-conformities (NCs), observations, and CAPAs.
  • Ensure continuous compliance with regulatory, contractual, and customer-driven security obligations.

  
  3. Security Operations, Monitoring & Tooling:

   

  • Oversee day-to-day security operations including:
  • SIEM monitoring
  • Log management
  • Threat detection and alerting
  • Collaborate with IT and infrastructure teams to strengthen:
  • Network security
  • Endpoint security
  • Identity and access management (IAM)
  • Cloud security posture
  • Evaluate, implement, and manage security tools such as:
  • Firewalls, IDS/IPS
  • EDR/antivirus solutions
  • DLP solutions
  • IAM, MFA, PAM
  • Vulnerability management tools
  • Define and monitor security KPIs and metrics for management reporting.

  4. Incident Response, BCP & Disaster Recovery:

   

  • Develop, maintain, and test Incident Response Plans (IRP).
  • Lead investigation, containment, remediation, and root-cause analysis of:
  • Security incidents
  • Data breaches
  • Vulnerability exploitation.
  • Coordinate incident response with internal teams, vendors, and external stakeholders when required.
  • Own and enhance Business Continuity Plans (BCP) and Disaster Recovery (DR) frameworks.
  • Conduct periodic BCP/DR drills, tabletop exercises, and cyber incident simulations.
  • Ensure readiness for ransomware, data breach, and operational disruption scenarios.

  
  5. Product, Application & Secure SDLC:

   

  • • Work closely with product engineering and development teams to embed security-by-design principles.
    • Define and enforce Secure SDLC practices, including:
    • Secure coding standards
    • Code reviews
    • Vulnerability scanning
    • Penetration testing coordination
    • Oversee application security for internally developed and third-party products.
    • Manage vulnerability remediation lifecycle for product platforms.

  Support customer security questionnaires, product security documentation, and assurance artifacts.

  6. Cloud Security & Certifications:

   

  • Lead security initiatives for cloud-hosted products and platforms (AWS / Azure/etc)
  • Drive cloud security compliance and certifications such as:
  • ISO 27001 for cloud scope
  • SOC 2 for SaaS platforms
  • Cloud-specific best practices (CIS Benchmarks)
  • Implement and monitor:
  • Cloud IAM and least-privilege access
  • Secure configuration baselines
  • Cloud logging and monitoring
  • Data protection and encryption controls
  • Partner with DevOps teams to integrate security into CI/CD pipelines

  
  7. Internal Systems, Access & Data Protection:

   

  • Ensure secure configuration and access control for internal enterprise systems including:
  • Zoho, JIRA
  • Office 365 Suite
  • Other SaaS and internal applications
  • Conduct periodic:
  • User access reviews
  • Privileged access reviews
  • Segregation of duties (SoD) checks
  • Ensure strong data classification, handling, retention, and protection controls.
  • Support privacy and data protection requirements related to customer and employee data

  
  8. Plant / OT Security (Where Applicable):

  • Collaborate with plant and operations teams to assess and improve OT / industrial system security.
  • Ensure basic cybersecurity controls for plant networks, devices, and access.
  • Conduct risk assessments for IT–OT integration points.
  • Align plant security controls with overall organizational security governance.

  
  9. Training, Awareness & Security Culture:

   

  • Design and conduct periodic information security awareness programs for employees.
  • Develop training materials covering:
  • Phishing and social engineering prevention
  • Password and access hygiene
  • Data protection and privacy
  • Secure development practices
  • Run simulated phishing exercises and track improvement metrics.
  • Foster a strong, organization-wide security-first culture

  
  10. Strategy, Roadmap & Continuous Improvement:

   

  • Define and own the information security roadmap aligned with business and product strategy.
  • Track emerging cyber threats, vulnerabilities, regulatory updates, and industry trends.
  • Recommend and implement continuous improvements to security posture.
  • Lead evaluation and rollout of new security tools, technologies, and frameworks.
  • Provide regular security posture updates to senior management.

  
  Requirements

  Desired Qualifications & Experience:

  
  Education:

  • Bachelor’s degree in Computer Science, Information Security, Engineering, or a related discipline.
  • Master’s degree preferred

  
  Experience:

  • • 6–10 years of hands-on experience in:
    • Information security
    • Cybersecurity operations
    • Risk, compliance, and audit management
    • Strong experience working in product/SaaS organizations.
    • Experience handling client data and customer-driven security requirements.

  Prior exposure to manufacturing/plant or OT environments is a plus

  Certifications (Preferred):

  • CISSP / CISM
  • ISO 27001 Lead Implementer or Lead Auditor
  • Cloud security certifications (AWS Security Specialty, Azure Security Engineer, etc.) – good to have
  • CEH (Certified Ethical Hacker)/ CompTIA Security+ ( good to have)

  
  Technical & Functional Expertise:

  • Information security governance and ISMS
  • ISO 27001, SOC 2, PCI DSS frameworks
  • Risk assessment and mitigation
  • Security audits and compliance operations
  • Application, network, endpoint, and cloud security
  • Incident response and BCP/DR
  • Secure SDLC and product security

  
  Soft Skills:

  • Strong communication and documentation skills
  • Ability to work cross-functionally with IT, product, engineering, and business teams
  • Proven ability to manage audits independently and external stakeholders
  • Strong analytical, problem-solving, and decision-making skills

Job Description.

• We are seeking an experienced OT Security Consultant with strong hands‑on expertise in OT security platforms, industrial control systems, and IT‑OT cybersecurity integration. The consultant will independently lead the design, deployment, and operations of OT security solutions across industrial environments, particularly within Oil & Gas and Energy sectors.Key Responsibilities
  • Deploy and configure OT security platforms such as Claroty and Nozomi (end‑to‑end implementation).
  • Integrate and work with FortiGate firewalls, Cisco networking, and OpenSearch for IT‑OT visibility.
  • Perform asset discovery, traffic analysis, anomaly detection, and alert tuning.
  • Design and support OT network segmentation based on the Purdue Model.
  • Work with Siemens / Rockwell PLCs, SCADA systems, Ignition, and common industrial protocols.
  • Provide scenario‑based OT security solutions and collaborate on requirement gathering & design discussions.
  • Lead OT security project delivery independently and manage stakeholders both on-site and remotely.

  Required Skills

  • Hands‑on experience with Claroty or Nozomi
  • Proficiency with FortiGate, Cisco networking, and OpenSearch
  • Experience in the Oil & Gas / Energy domain
  • Working knowledge of PLC/SCADA systems
  • Strong understanding of OT segmentation & Purdue Model
  • Experience managing 100–200+ sensor deployments
  • Strong analytical and problem‑solving skills

  Good to Have

  • Exposure to IEC 62443
  • Experience with IT/OT integration
  • Experience with incident response in OT environment

Job Description.

• mplement and support security controls for PLCs, HMIs, SCADA systems, RTUs, and other OT assets.Perform risk assessments, define segmentation strategies, and contribute to OT security baselines.Work with OT security tools such as Claroty, Nozomi, Armis, or Tenable.ot to monitor and protect industrial networks.Collaborate with plant operations, engineering, and OT vendors for secure implementation and lifecycle support.Assist in SIEM log integration, alert triage, and incident investigation related to OT systems.Support network segmentation, firewall configuration, and passive traffic monitoring within OT environments.Participate in the creation of documentation, playbooks, and process improvements for OT security operations.Required Skills & Qualifications:
  3+ years of experience in OT/ICS cybersecurity or related roles.Strong understanding of ICS protocols like Modbus, DNP3, OPC, etc.Experience with industrial devices and systems (PLCs, SCADA, RTUs, robotic automation).Familiarity with OT-specific risks and the unique constraints of industrial environments.Exposure to OT security tools (e.g.,Claroty, Nozomi, Armis, Tenable.ot).Working knowledge of SIEM tools, firewalls, and network segmentation in OT setups.Good communication skills and the ability to work with multi-disciplinary teams.Preferred (Nice to Have):
  Certifications like GICSP, GRID, IEC 62443 or other OT security credentials.Familiarity with NIST CSF, IEC 62443, or related cybersecurity frameworks.

Job Description.

• • Responsible for Cybersecurity requirement from Tender till Project Handover. Coordinate with Cyber Security Lead or Officer to fulfill Hitachi Energy requirement and Customer requirements.
  • Assess, identify deviation and Risks in Customer requirement and required standard & regulatory requirement during Tender.
  • Acts a liaison with the Customer about Hitachi Energy’s automation solution’s adherence to customer requirements and required standard & regulation.
  • Review Project Cybersecurity deliverables are implemented and delivered as agreed. For platforms certified with IEC 62443-3-3, make sure that the delivery project is within the requirements of the standard to the extent possible.
  • Support to enhance and maintain the CS documentation for project deliverables.
  • Ensure the Vulnerability Management in delivery projects.
  • Support in Business in achieving IEC 62443 2-4 Certification and in IEC 62443 3-3 certification. Support in maintaining and improving the Cybersecurity solution.
  • Contribute to Cybersecurity Assurance process definition and improvement in Customer Delivery Projects. Ensure Test area Asset security Management and Security tools.
  • You will be responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines.
  • Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

  Your background

   

  • You hold a degree in BE/BTech or equivalent, power, electrical, communications preferred Experience in automation of power transmission and distribution networks.
  • Minimum 6+ years of IT/OT Industry Experience in Control System Automation (3+ years of Cybersecurity with emphasis on OT) or 5 + years as an OT Cyber Security Implementer or Architect.
  • Advanced Knowledge OT Networking and Network security.
  • Experienced working in OT environment components and OT security. Knowledge of Cybersecurity Regulation, Standards and Framework – (IEC62443, NERC–CIP, BDEW, NIST Publication).
  • Awareness on current Cybersecurity controls and solutions – Endpoint Security, AAA, Security logging, Hardening benchmarks. Knowledge on Security tool (NESSUS, CIS CAT, Nmap).
  • Understanding on Computer networks and network security – Firewall, IDS.
  • Desirable with ISA 99 / 62443 – Cybersecurity Fundamentals Specialist, GIAC, GICSP, CEH certification.
  • Good communication skills.

Job Description.

• • • Ensure quality and accurate information of security assets in the CMDB Enforce security policies, procedures, and best practices for OT environments.
    • Be able and willing to travel offshore Incident Response: Oversee incident response activities for OT systems, including detection, containment, and recovery.
    • Security Monitoring: Support the implementation and use of OT cybersecurity monitoring solutions.
    • Ensure compliance with industry standards for security of OT environments.
    • Continuous Improvement: Stay updated with the latest OT security threats, trends, and industry standards.
    • Compliance Assessment for clients, regulators, and access management
    • Operate and maintain Vulnerability Management solutions
    • Alert on threats, disrupting adversaries and abnormal behaviour.
    • Operate and maintain lifecycle of all security systems
    • Monitoring for threats using OT Cybersecurity and assessment tools.
    • Monitor and assist vendors to ensure proper security protocols are followed and assessments are conducted.
    • Monitor and assist any and all personnel to ensure that a cyber risk mindset is in place by monitoring behaviors and providing OT Cybersecurity training
    • Remote connection reviews
    • Backup verifications
    • Participate in Cybersecurity drills
    • Produce security reports to be reviewed and acted on for continuous improvement

    Education
    

    • A bachelor’s degree in cybersecurity, information technology, engineering, or a related field is typically required.

    Experience
    

    • 2-5 years of experience with OT, ICS, or SCADA technology, cybersecurity, and risk management frameworks. Experience in network security, cryptography, and authentication systems is essential.
    • Certifications: Relevant certifications such as Certified Information Systems Security Professional (CISSP), Certified Information Security Manager (CISM), or certifications specific to OT security are highly valued.

    Functional Competencies

    Analytics and reporting
    Compliance
    Governance, Risk and Control
    ICSS – Operational Technology Cybersecurity
    Risk Management

    Security Management

Job Description.

• Works on strategic projects that ensure the efficient and effective reaction to security breaches to mitigate immediate and potential threats.
• Uses mitigation, preparedness, response and recovery approaches to minimize business disruptions and commercial consequences.
• Offers detailed technical support investigation and analysis response activities and evaluate the effectiveness of and improvements to existing practices.
• Conducts regular threat and vulnerability assessments and determine deviations from acceptable configurations or policies.
• Participates in the assessment of the level of risk and support the development of appropriate mitigation countermeasures in operational and non-operational situations.
• Analyzes evidence to support network vulnerability mitigation.
• Supports peers in the management and implementation of the information security management system.
• Participates in the implementation of policies, processes and guidelines to ensure the standardization of security management throughout the organization.
• Applies tactics, techniques, and procedures to a full range of tools and processes related to administrative, criminal, and counterintelligence gathering (e.g., in-depth case analyses, continuous monitoring, malware analysis, clear documentation).
• Proactively searches through our critical infrastructure, systems and networks to detect and isolate advanced threats that may cause harm to our organization.
• Use both manual approaches and automated tools to identify, analyze, and report events and support the development of countermeasures to proactively protect against these threats in the future.

To thrive in this role, you need to have:

• Strong understanding of information technology and information security
• Solid understanding of security risks and preventative controls
• Excellent understanding of security operational processes and controls
• Service consulting aptitude, focusing on the business, service and sales aspects
• Excellent verbal and written communication skills
• Demonstrate impeccable attention to detail are able to translate internal customer requirements into solutions
• Maintain up-to-date knowledge of security threats, countermeasures, security tools, and network technologies
• High level of drive and ability to work under pressure
• Ability to build and maintain cross-functional relationships with a variety of stakeholders
• Understanding of relevant laws, regulations, and compliance frameworks affecting the technology sector.
• Good ability to assess and manage cybersecurity risks at both organizational and project levels.
• Good knowledge of security frameworks and standards like NIST, ISO/IEC 27001, CIS, etc.

Academic qualifications and certifications:

• Bachelor’s degree or equivalent in Information Technology or Computer Science or Engineering or related field.
• Industry relevant certifications such as CISSP, CISM, CEH, GSEC or CompTIA Security+ essential.

Required experience:

• Seasoned demonstrable experience in the Information Technology Security Industry or relevant experience in similar role within a related environment.
• Seasoned experience with security architecture design principles.
• Seasoned experience with industry compliance and standards such as ISO 27000, PCI DSS, NIST, HIPAA or others.
• Seasoned experience with security tools and techniques to cover SANS Top 25, OWASP or others.
• Seasoned experience working in a multi-team environment across multiple geographies.

Workplace type:

Hybrid Working

Job Description.

• Works on strategic projects that ensure the efficient and effective reaction to security breaches to mitigate immediate and potential threats.
• Uses mitigation, preparedness, response and recovery approaches to minimize business disruptions and commercial consequences.
• Offers detailed technical support investigation and analysis response activities and evaluate the effectiveness of and improvements to existing practices.
• Conducts regular threat and vulnerability assessments and determine deviations from acceptable configurations or policies.
• Participates in the assessment of the level of risk and support the development of appropriate mitigation countermeasures in operational and non-operational situations.
• Analyzes evidence to support network vulnerability mitigation.
• Supports peers in the management and implementation of the information security management system.
• Participates in the implementation of policies, processes and guidelines to ensure the standardization of security management throughout the organization.
• Applies tactics, techniques, and procedures to a full range of tools and processes related to administrative, criminal, and counterintelligence gathering (e.g., in-depth case analyses, continuous monitoring, malware analysis, clear documentation).
• Proactively searches through our critical infrastructure, systems and networks to detect and isolate advanced threats that may cause harm to our organization.
• Use both manual approaches and automated tools to identify, analyze, and report events and support the development of countermeasures to proactively protect against these threats in the future.

To thrive in this role, you need to have:

• Strong understanding of information technology and information security
• Solid understanding of security risks and preventative controls
• Excellent understanding of security operational processes and controls
• Service consulting aptitude, focusing on the business, service and sales aspects
• Excellent verbal and written communication skills
• Demonstrate impeccable attention to detail are able to translate internal customer requirements into solutions
• Maintain up-to-date knowledge of security threats, countermeasures, security tools, and network technologies
• High level of drive and ability to work under pressure
• Ability to build and maintain cross-functional relationships with a variety of stakeholders
• Understanding of relevant laws, regulations, and compliance frameworks affecting the technology sector.
• Good ability to assess and manage cybersecurity risks at both organizational and project levels.
• Good knowledge of security frameworks and standards like NIST, ISO/IEC 27001, CIS, etc.

Academic qualifications and certifications:

• Bachelor’s degree or equivalent in Information Technology or Computer Science or Engineering or related field.
• Industry relevant certifications such as CISSP, CISM, CEH, GSEC or CompTIA Security+ essential.

Required experience:

• Seasoned demonstrable experience in the Information Technology Security Industry or relevant experience in similar role within a related environment.
• Seasoned experience with security architecture design principles.
• Seasoned experience with industry compliance and standards such as ISO 27000, PCI DSS, NIST, HIPAA or others.
• Seasoned experience with security tools and techniques to cover SANS Top 25, OWASP or others.
• Seasoned experience working in a multi-team environment across multiple geographies.

Workplace type:

Hybrid Working

Job Description.

• Job Title OT Cybersecurity EngineerAt Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients’ lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a(n) OT Cybersecurity Engineer, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact byThe OT Cybersecurity Engineer is responsible for deploying, managing, and monitoring protection solutions across Solventum’s OT environments. This role ensures secure remote access, integration with advanced authentication and applications, and ongoing support for OT infrastructure maintenance, patching, and user support, all while aligning with industry-leading frameworks such as IEC 62443, NIST CSF, and NIST 800-82.Key Responsibilities
  • Endpoint protection: Deploy, manage, and monitor endpoint protection solutions for OT systems.
  • Secure remote access: Implement and maintain secure remote access solutions, integrating with segmented secure authentication.
  • OT infrastructure support: Provide ongoing support for OT infrastructure maintenance, patching prioritization, and monitoring implementation.
  • Transformation projects: Participate in OT transformation and upgrade projects. Develop automation for OT Security processes.
  • User support: Offer technical support to OT users, ensuring secure and efficient operations.
  • Advanced technical support: Implement and optimize security technologies to enhance current infrastructure.
  • Policy and standards alignment: Align and enhance OT cybersecurity policies, standards, and processes.
  • Risk management: Identify, report, and mitigate risks and gaps in OT endpoint security. Apply knowledge of vulnerability management, threat detection, and risk evaluation with OT prioritization and mitigation.
  • Collaboration: Work closely with the OT Cybersecurity Architect, IT SOC, OT Security Governance, and Cybersecurity Regional and Local Resources.
  • Incident response: Enhance incident response capabilities in collaboration with site teams and the Security Operations Center (SOC).
  • Asset management: Support and enhance OT asset management practices.

  To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications

  • Bachelor’s Degree or higher AND experience In endpoint protection technologies and OT environments.
  • Overall the candidates should have 10yrs of experience with
  • minimum 4-5yrs relevant to the field.
  • Ability to troubleshoot and resolve complex endpoint security issues.

  In addition to the above requirements, the following are also required:

  • Experience with NIST CSF, IEC 62443, and NIST 800-82.
  • Excellent collaboration and communication skills.

  Work location:

  Remote

Job Description.

• • IT-OT Infrastructure & Operations
  • Design, implement, and maintain secure IT-OT infrastructure ensuring reliability, performance, and cyber resilience.
  • Provide expert technical support and resolve complex IT-OT integration and security issues to minimize downtime.
  • Maintain a comprehensive asset inventory (wired, wireless, and IIoT) for visibility and configuration management.
  • Act as a subject matter expert (SME) in OT security and infrastructure lifecycle management.
  • OT Cybersecurity Governance & Implementation
  • Develop, implement, and enforce cybersecurity policies and standards in alignment with SANS, IEC 62443, NIST, and CIS frameworks.
  • Conduct security assessments, audits, and compliance reviews across control networks and critical systems.
  • Integrate IDS/IPS and SIEM solutions to monitor and detect OT-specific cyber threats.
  • Utilize OT cybersecurity monitoring tools (e.g., Dragos, Nozomi, Claroty, Armis) for continuous threat visibility and anomaly detection.
  • Use network and infrastructure monitoring platforms (e.g., SolarWinds, Zabbix, NetBrain) for performance tracking, topology mapping, and proactive incident management.
  • Maintain measurable compliance and security posture reporting for enterprise and regulatory requirements.
  • Secure OT Migration & Deployment (Greenfield / Brownfield Projects)
  • Lead secure OT migration initiatives for modernization or technology upgrades.
  • Design greenfield OT environments with security integrated from concept to commissioning.
  • Assess and retrofit brownfield environments, addressing vulnerabilities in legacy systems.
  • Develop and execute migration roadmaps aligned with Purdue Model (Levels 0–5) for secure network segregation.
  • Collaborate with engineering and operations teams to ensure secure deployment of new OT technologies.
  • Security Architecture & Purdue Model Segmentation
  • Architect secure OT network topologies aligned with the Purdue Enterprise Reference Architecture (PERA).
  • Implement network segmentation (zones and conduits) to isolate critical control systems and prevent lateral movement.
  • Configure and deploy firewalls, VLANs, routers, and switches using Cisco, Palo Alto Networks, or equivalent solutions.
  • Conduct network segmentation reviews to ensure compliance with IEC 62443 and enterprise policies.
  • Develop and document zoning, conduit policies, and access controls for OT systems.
  • Wireless and IIoT Security
  • Design and secure wireless OT communications (Wi-Fi, Bluetooth, LoRa, Zigbee, 4G/5G) used in IIoT and industrial telemetry.
  • Implement wireless security controls such as 802.1X authentication, WPA3-Enterprise, and NAC.
  • Perform wireless vulnerability assessments to detect rogue access points, weak encryption, or interference risks.
  • Integrate wireless telemetry systems with enterprise SIEM and SOC platforms for unified visibility.

  Threat, Risk, and Control Management

   

  • Identify threats, vulnerabilities, and attack paths specific to industrial control systems and connected OT assets.
  • Build security control libraries, design patterns, and reusable best practices mapped to industry standards.
  • Evaluate and optimize existing controls and defense mechanisms to ensure a multi-layered security posture.
  • Provide detailed configuration and deployment playbooks for consistent and secure implementation.
  • Integration, Collaboration & Continuous Improvement

  Collaborate with IT, OT, and engineering teams to align cybersecurity architecture with operational and business objectives

  • Identify and remediate security gaps in solution designs, ensuring effective risk management.
  • Support integration of OT monitoring platforms with enterprise-level analytics and response systems.
  • Demonstrate operational excellence and continuous improvement across all project phases and engagements.

  Qualifications & Skills

   

  • Education: Bachelor’s or Master’s in Computer Science, Electrical, Electronics, or Industrial Engineering.
  • Experience: 5–10 years in OT/ICS cybersecurity, network engineering, or industrial automation.

  Certifications (Preferred)

   

  • SANS GICSP, GRID, GIAC ICS Defender, GCIP
  • CISSP, CISM, CEH, CompTIA Security+ / CySA+
  • ISA/IEC 62443 Expert / Practitioner

  Cisco CCNP Security, Palo Alto PCNSE, CWSP / CWNA (for wireless O

Job Description.

Location Mumbai

Total yoe 5 + yrs

JD –

We are seeking a highly skilled and experienced OT Security Operations Center (SOC) Analyst / Engineer with a strong background in Nozomi Networks and operational technology (OT) environments. The ideal candidate will have a minimum of 2 years of hands-on experience with OT IDS and Nozomi, combined with a solid understanding of ICS/SCADA systems, OT cybersecurity, and threat detection methodologies. This is a critical role aimed at enhancing visibility, threat detection, and incident response capabilities for a global client. Responsibilities

• Deploy, configure, maintain, and optimize Nozomi Networks platforms across multiple OT environments.
• Monitor and investigate alerts and anomalies across OT networks, providing detailed incident analysis and response actions.
• Correlate OT and IT security events to identify threats, vulnerabilities, and misconfigurations.
• Develop and fine-tune detection use cases, signatures, and alerts within Nozomi and SIEM platforms.
• Coordinate with OT engineers, IT security teams, and third-party vendors for threat hunting and response efforts.
• Lead or support forensic investigations and root cause analysis in OT/ICS incidents.
• Ensure compliance with internal policies and industry standards such as IEC 62443, NIST CSF, and others.
• Provide detailed reports, dashboards, and threat intelligence insights to stakeholders. Requirement Essentials
• Minimum 2 years direct hands-on experience with Nozomi Networks tools and services.
• Proven experience in OT/ICS cybersecurity, especially within critical infrastructure environment.
• Experience with virtualization platforms (VMware, Proxmox etc)
• Hands-on experiences with SIEM tools – configuring data sources, filtering, parsing
• Strong understanding of industrial protocols (Modbus, DNP3, IEC 104, OPC, etc.).
• Demonstrated experience with network traffic analysis, anomaly detection, and alert tuning in OT environments.
• Knowledge of SOC operations, SIEM tools, and incident response workflows.
• Excellent communication and documentation skills; ability to explain technical issues to non-technical stakeholders.
• Experience working with cross-functional teams in IT/OT converged environments. Nice to Have
• Certifications such as Nozomi Certified Engineer.
• Experience with other OT security platforms (Claroty, Dragos, SCADAfence, etc.).
• Basic knowledge about Linux,
• Familiarity with SIEM tools such as Splunk, QRadar, or LogRhythm.
• Exposure to threat intelligence frameworks, MITRE ATT&CK for ICS, or threat hunting techniques in OT.
• Experience with firewalls, NAC, or asset management tools in industrial environments. Location Mumbai / Bengaluru

Job Description.

In this role, you will have the opportunity to be accountable to deliver and orchestrate the delivery of Information Systems (IS) service line operations activities. Each day, you will coordinate with and supervise internal and/or external third-party supplier resources for the effective delivery and operational performance of the services in scope. You will also showcase your expertise by ensuring continuous improvement and compliance.

The work model for the role is:

This role is contributing to the Security Risk and Compliance Organization Globally. Main stakeholders are Security teams, Information Systems teams across global services and business areas.

You will be mainly accountable for:

• Fulfilling the service requests in the agreed Service Level Agreements (SLAs) and collaborating with IS Service Owner to define the domain service catalog.
• Reviewing SLAs and corresponding service monitoring and controlling metrics to identify rightsizing opportunities.
• Dedicating resources to monitor problem volumes, Root Cause Analysis (RCA) quality, solution timelines, and following up on potential improvement opportunities.
• Deploying and operating the OT-IDS Solutions (e.g. Claroty, Nozomi) and tooling as part of our OT Security services across ABB. This includes OT Asset Management, OT Vulnerability Management and OT Incident Reporting. While these services are not business critical as in downtime directly impacting our production, but it does impact on our OT Security visibility.
• The focus of this position is on the technical aspects of service operations e.g. OT-IDS operations.
• Driving the technical support of onboarding of new sites, this includes the onsite deployment of the OT-IDS sensors integration in the central management console.
• Keeping the OT-IDS Solutions operational and address any issues that operationally can impact the solutions, their operations as well as the site in which they are deployed.
• Driving the support to users of these OT-IDS Solutions with any reported issues, change requests or other faced challenges.

Qualifications for the role:

• 10+ years of experience, with relevant OT security experience of 5 years.
• Bachelor’s degree in Computer Science or related field (preferred).
• Certifications required: ITIL Foundation, OT-IDS (Claroty, Nozomi or similar) technical certifications.
• Certifications preferred: CISSP, GICSP, IEC62443 related certifications.
• Strong global experience, especially in collaborating with distributed teams on security topics.
• Excellent communication and presentation skills, possessing confidence when engaging senior stakeholders.

Apply / Know more …

Job Description.

• Lead the design and implementation of cutting-edge cybersecurity solutions for building automation systems.
• Conduct in-depth security assessments and risk analysis to identify vulnerabilities and recommend mitigation strategies.
• Collaborate with cross-functional teams to integrate security measures into the development lifecycle of products and systems.
• Act as a technical mentor, providing guidance and support to junior cybersecurity professionals.
• Participate in incident response activities, contributing technical expertise to resolve security incidents promptly.

Qualifications

• 5+ years software development experience required with at-least 2 years in developing secure systems.
• Product architecture and development background. Secure software development lifecycle experience, understanding of security by design principles and architecture level security concepts.
• Exhaustive experience around security requirements reviews, performing threat modeling, security architecture & design review, secure code review, vulnerability assessment and risk management.
• Experience with widely used security tools like SD Elements, BlackDuck Hub, Microsoft Threat modeling tool, SAST (Coverity, SonarQube), DAST (Burp, ZAP, AppSpider), Fuzzing, Vulnerability management and continuous monitoring tools.
• In-depth knowledge of cybersecurity technologies, frameworks, and best practices
• Strong interpersonal skills with the ability to facilitate diverse groups, help negotiate priorities, and resolve conflicts among projects stakeholders. Ability to lead direct and indirect reports by influence.
• Excellent communication and ability to convey complex technical concepts to stakeholders.

WE VALUE

• Bachelor’s or Advanced Degree in Cybersecurity, Computer Science, or another related field.
• Demonstrated leadership skills and experience managing cybersecurity teams.
• Experience and knowledge of penetration testing methodologies and tools.
• Up to date knowledge of current and emerging security threats and techniques for exploiting security vulnerabilities.
• Understanding of Agile software development practices.
• Sound understanding of Cryptography, encryption algorithms, Public Key Infrastructure (PKI), Secure boot and Open source risk management.

Certifications in security and privacy demonstrating deep practical knowledge such as CSSLP or CISSP

Apply / Know more …

Job Description.

• 
  2–6 years of relevant experience in system security, embedded systems, and vulnerability assessments.Key Skills
  • Firmware Analysis Tools: Expertise in using firmware analysis tools such as Ghidra, Binwalk, and Radare2 for static and dynamic analysis of firmware images.
  • Embedded Linux Platforms: In-depth knowledge of embedded Linux, Yocto, and OpenWRT platforms for secure firmware and OS testing.
  • Secure Boot & Firmware Update Mechanisms: Proficiency in testing secure boot processes and firmware update mechanisms, ensuring integrity and authenticity.
  • OS Hardening & Security Configurations: Strong understanding of OS hardening techniques and security configurations to mitigate threats and enhance system integrity.
  • Vulnerability Assessment & CVE Analysis: Extensive experience with vulnerability assessment frameworks and CVE analysis, identifying and addressing security vulnerabilities in embedded systems.
  • Debugging & Emulation Tools: Proficient in using debugging tools and emulators such as QEMU to analyze embedded system behavior.
  • SBOM & Secure Update Protocols: Familiarity with SBOM (Software Bill of Materials), patch management, and secure update protocols to ensure safe software deployments.
  • Firmware Reverse Engineering: Expertise in performing reverse engineering of firmware images to detect vulnerabilities and potential exploits.
  • Penetration Testing Frameworks: Experience using penetration testing frameworks like Metasploit, Kali Linux, and custom tools for system vulnerability testing.
  • Custom Test Case Development: Ability to develop and execute custom test cases to simulate real-world attack scenarios and identify potential risks in embedded systems.
  • Leadership & Mentoring: Strong leadership skills with a proven track record of mentoring junior engineers and guiding teams in advanced security testing methodologies.
  • Technical Writing & Reporting: Excellent technical writing skills, including the ability to produce clear, concise, and detailed reports on security findings and risk assessments.
  • Proactive Security Risk Mitigation: Proactive in identifying and mitigating security risks within embedded systems, ensuring the implementation of security best practices.

  Responsibilities

   

  • Leadership in Security Testing: Lead system-level Vulnerability Assessment and Penetration Testing (VAPT) for firmware, operating systems, and embedded software, ensuring thorough security evaluations.
  • Test Plan Development & Execution: Develop and implement comprehensive test plans for secure update and patch validation, ensuring security fixes are applied correctly and without introducing new risks.
  • Firmware Static & Dynamic Analysis: Conduct detailed static and dynamic analysis of firmware images using tools like Ghidra, Binwalk, and Radare2 to identify potential vulnerabilities.
  • Secure Boot & Root of Trust Validation: Validate secure boot implementations and hardware root of trust to ensure system integrity and protection from malicious code injection.
  • OS Hardening & Access Control Testing: Test OS hardening configurations and secure access control mechanisms to strengthen system defenses against unauthorized access and exploitation.
  • Vulnerability Identification & Classification: Identify and classify vulnerabilities and misconfigurations in embedded systems, following industry standards such as CVSS for risk assessment and remediation prioritization.
  • Collaboration with Compliance & Engineering: Work closely with compliance and engineering teams to prioritize remediation efforts, ensuring that vulnerabilities are addressed effectively.
  • Custom Attack Simulations: Develop and execute custom test cases to simulate real-world attack scenarios and evaluate the system’s resilience against cyber threats.
  • Rollback & Patch Management Testing: Oversee testing of rollback and patch management procedures, ensuring that system updates do not compromise security or functionality.
  • Mentoring & Knowledge Sharing: Mentor junior engineers in security testing methodologies, sharing knowledge on advanced techniques and tools for improving system security testing processes.
  • CVE Monitoring & Testing Updates: Monitor relevant CVE feeds, integrating new vulnerabilities and security patches into testing procedures to ensure up-to-date protection.
  • Reporting & Risk Assessments: Provide detailed technical reports and risk assessments to stakeholders, outlining identified vulnerabilities, potential impact, and recommended mitigations.
  • Regulatory Compliance: Ensure that all testing activities align with industry standards, including RED 18031 compliance, and adhere to relevant regulatory frameworks.
  • Secure Lab Environment Maintenance: Maintain a secure lab environment for all system testing activities, ensuring that testing procedures are conducted in a controlled and isolated setting.

  Qualifications & Certifications

   

  • Education: Bachelor’s or Master’s degree in Cybersecurity, Embedded Systems, Computer Engineering, or a related field.
  • Certifications (Preferred):
    • OSCP (Offensive Security Certified Professional)
    • OSCE (Offensive Security Certified Expert)
    • GXPN (GIAC Exploit Researcher and Advanced Penetration Tester)
    • Equivalent certifications in ethical hacking, penetration testing, or embedded system security are also highly valued.
  • Industry Standards Familiarity: Familiarity with security frameworks such as ISO/IEC 62443, RED 18031, and IoT security frameworks.

Apply / Know more …

Job Description.

• The Security Engineer will be responsible for helping to build and support the Copeland Product Security Program. This cross-functional position will work directly with product development teams by consulting on and testing security strategies.As a Security Engineer, You Will
  • Perform product security testing and reporting, including but not limited to:
  • Black box reverse engineering of hardware and firmware
  • Vulnerability research
  • Exploit development
  • Fuzz testing
  • Protocol reverse engineering
  • Conduct manual penetration testing, including but not limited to:
  • Mobile Applications (iOS & Android)
  • Web Applications
  • Cloud Infrastructure
  • Network Systems
  • Facilitate threat modeling with Copeland application, infrastructure, and product teams.
  • Perform security training and outreach to internal development teams.
  • Perform security analysis & evaluation of ICS/OT environments related to product manufacturing.
  • Perform security analysis & evaluation of both hardware and software supply chains.
  • Maintain documentation and metrics for the product security program’s services.

  Department Summary

  The Copeland Product Security department is focused on ensuring that our products are secure and that we are protecting our clients from relevant cyber threats by proactively identifying, addressing, and preventing vulnerabilities that could impact the confidentiality, integrity, or availability of our products, services, or solutions. We seek individuals with experience and innovative ideas in Operational Technology (OT)/ICS SCADA/IOT security interested in integrated security operations (IT, OT, and Physical) and adversary emulation.

  Who You Are

  You look beyond the obvious and don’t stop at the first answers. You adjust communication content and style to meet the needs of diverse stakeholders. You maintain relationships across a variety of functions and locations. You are not afraid to disagree and are open to debate.

  Minimum Qualifications

   

  • Minimum of 5 years of experience with any combination of the following: embedded systems and IoT security, red teaming, or penetration testing
  • Experience conducting security testing of embedded hardware and the ability to identify and manipulate debug interfaces (UART, JTAG, SWD, etc.) and peripheral buses (SPI, I2C, etc.)
  • Binary Reverse Engineering of ARM, MIPS, and PowerPC firmware using industry-standard tools such as IDA Pro, Binary Ninja, Ghidra, etc.
  • Experienced planning and executing Red Team exercises.
  • Experience in Fuzz Testing of industrial communication protocols like Wi-Fi / BLE / Wireless HART / PROFINET/ MODBUS / Ethernet IP/ OPC UA/ HART /FF
  • Understanding of secure libraries (e.g., bootloader, etc.)
  • Knowledge of embedded Linux required, knowledge of Real-Time Operating Systems a plus.
  • Understanding network, web, IoT, and industrial-related protocols (such as TCP/UDP, HTTPS, MQTTS, CoAP, Modbus, Ethernet/IP, DNP3, OPC-UA, etc.)
  • Excellent written and verbal communication skills.
  • Strong sense of ownership, urgency, and drive
  • Sharp analytical skills with the ability to synthesize new information quickly.

  Preferred Qualifications

   

  • Understanding of cloud solutions and architectures supporting IoT and Edge computing environments
  • Experience with programming languages such as, Python, C#, C/C++, Ruby, Assembly, etc.
  • Experience with OT network monitoring, including serial, Ethernet, wireless, etc.
  • Experience with OT adversary emulation.
  • Working knowledge of cybersecurity policies and standards related to ICS/SCADA.

Apply / Know more …

Job Description.

• Key Responsibilities :
  • Manage IT/OT security controls, incident response, vulnerability fixes, and policy compliance.
  • Oversee end-to-end IT asset lifecycle and maintain accurate CMDB records.
  • Support RFI/RFP processes, vendor coordination, and BOM preparation.
  • Handle ServiceNow service requests and ensure SLA compliance.
  • Manage privileged access (PAM), access reviews, and zero-trust practices.
  • Monitor cybersecurity alerts, support SOC activities, and maintain security documentation.
  • Assist in designing secure network & security :
  • 4 – 8 years experience in IT/OT security and IT asset management.
  • Strong knowledge of SIEM, IAM/PAM, Firewalls, ServiceNow, ITIL, and compliance frameworks.
  • Understanding of OT systems (SCADA/ICS).
  • Certifications like Security+, CEH, ITIL, or IEC 62443 preferred.

Apply / Know more …

Job Description.

• Assure the design and implementation of the Cybersecurity System in order to achieve the requirements in terms of compliance, schedule, quality and cost imposed by the different contracts either for the Tender and ProjectsEducation & Experience
  • As minimum Bachelor’s , preferred master Degree in Telecom Engineering Degree or in descending order Computer/Information Science, Electronic Engineering
  • 5 years of Cybersecurity System Engineering expertise as minimum.
  • Cybersecurity qualifications or certification is preferred
  • Railway experience is preferred but also experiences in other telecom sectors can be considered (e.g. Oil&Gas, power energy companies, telecom operators, etc.).

  Accountabilities

   

  • Ensure the identification, the management and the fulfillment of the contractual requirements and customer requests
  • Analyze customer supplied system specifications, decomposing the statements within such specifications into software requirements
  • Identify gaps between customer requirements and Hitachi standard software products or COTS products
  • Developing close working relationship with customer Cybersecurity representatives
  • Create requirement documents, including high level design documents, interface control design documents and detailed software requirements and specifications, and requirements traceability documents.
  • Be the primary technical interface to the customer throughout the life cycle of the project and act as technical liaison relative to the software development effort with other departments within the company working on the same project.
  • Contribute to the identification and resolution of the interfaces with the main subsystems (e.g. Signaling, TLC, DCS, SCADA, etc.) and security systems (e.g. SIEM)
  • Interface with internal customers (project managers, construction managers, project engineers, and application engineers) and external stakeholders (customers, suppliers, subcontractors, local authorities, external assessor) to ensure consistent communication and system integration.
  • Develop and execute security management plan and commissioning plan, including resourcing, logistics, and scheduling. Onsite lead for commissioning and acceptance testing.
  • Coordinate work sequences, schedules, resources and punch list items.
  • Collaborate with stakeholders to define and execute testing protocols to achieve commercial operation, based on contractual requirements.
  • Oversee commissioning and acceptance testing of the entire plant in a safe manner, including controls and communication networks, power supplies, auxiliary systems like fire detection, ventilation, HMI.
  • Provide local/remote technical support troubleshooting during commissioning, and operation as needed.
  • Develop customer training and handoff material to internal and external O&M teams. Develop a train-the-trainer program to enable successful handoffs for safe operation of the plant.
  • Create professional commissioning and testing reports for internal stakeholders and external customers.
  • Drive continuous improvement on developing and capturing technical problem solving knowledge to enable other organizations to effectively resolve customer problems and inquiries.
  • Ownership of administrative responsibilities including, but not limited to: service reports, issue logging/tracking, job safety analysis, quality compliance.
  • Guarantee the preparation and approval of the Design:
  • Conceptual Design
  • Cyber Security Management Plan
  • High Level Risk Assessment based on the methodologies described in the standards (NIST 800-53, IEC 62443 and ISO 27000)
  • Detail Risk Assessment (DRA) and Threat and Vulnerability Risk Assessment (TVA)
  • Security Case (in according to IEC 62443-4-1 and EN 50129:2018)for the security assurance and security procedures (for incident management, patch and vulnerability management, asset and configuration management, etc.)
  • Security Report (include the VA and PT test results)
  • Undertake Cybersecurity activities as defined in the design documentation, e.g. vulnerability assessment
  • Guarantee the continuous security monitoring of the System in accordance to the technology innovation
  • Security Audits during the Project with the Customer

  Competencies

  The Cybersecurity engineer shall be able to:

  • Act keeping in mind the impacts of his/her own work on the whole “Company system” and understanding the economic consequences of his/her activities both on client and organizational perspectives. Propose simple and efficient solutions to meet customer needs.
  • Commit to understanding and delivering against customer requirements, keeping them informed about progress on a specific activity/project. Actively seek information to understand customer circumstances, problems, expectations and needs.
  • Provide contributions in defining personal stretching goals. Focus on new or more effective ways of improving his/her own work and meeting targets. Commit to exceed expectations.
  • Set stretching and realistic targets for him/herself and his/her team, improving performance and benchmarks against industry standards and competition. Recognize and celebrate the achievement of milestones and goals.
  • Understand areas of improvement and define a personal development plan to follow whose progress is regularly checked. Welcome new assignments for personal development.
  • Understand markets and industrial trends and their changes and how they may impact the Company/the Group. Keep him/herself updated on products, services, markets and clients in order to plan activities.
  • Adapt to different cultures and international environments establishing relationships that create business benefit.
  • Accommodate for cultural differences to improve effectiveness and adapt leadership style depending on the situation (adherence to the team’s expectations).
  • Compare him/herself and his/her team against the international best practices. Encourage the contribution of different people with different experiences and backgrounds in order to optimize outcomes. Pursue opportunities to learn about other cultures using an open-minded approach.
  • Seek opportunities to expand and leverage knowledge across organizational boundaries. Draw upon multiple and diverse sources for ideas and inspiration. Examine and evaluate potential solutions before accepting any.
  • Review performance and learn from mistakes. Be aware of technological/organizational developments that could provide innovative solutions to improve performance and add value. Target important innovation areas and develop solutions addressing meaningful work issues.
  • Follow up the supplier of the cybersecurity technologies. Review the technical documentation produced by the supplier before the submittal to the Customer.
  • Analyze the comments and requests received by the Customer on the Design and the Commissioning phases.
  • Participate to the Factory and Site acceptance tests with the Customer.

  Required Skills & Knowledge

   

  • Telecommunications System Architectures and Solutions
  • ISO 27001 and 27005
  • EN 50159
  • NIST 800-53 and 800-82
  • IEC 62443 family
  • Backbone Transmission Systems and Elements
  • IP Networking – Wired & Wireless
  • System Integration knowledge
  • SIEM technology experience
  • Firewall Configuration and Management Knowledge
  • Active Directory and Radius Configuration Management (802.1x)
  • Nessus Tool Professional experience for Vulnerability and Penetration Tests
  • SCADA security and knowledge of the main SCADA architectures and communication protocols
  • Cisco Certificate CCNA, CCNA Security or CCNP is preferable title.
  • Experience of undertaking or managing vulnerability assessments and penetration testing activities
  • Experience of Patch Management and Configuration Management

  Highly Preferred Skills & Knowledge

   

  • Wireless Communication Systems
  • Trunked Mobile Radio Systems
  • Public Carrier Systems and Services
  • Wiring Rules, cables, Codes and Regulations
  • Network Management Systems

  Knowledge of the main organizational processes:

   

  • Bidding & costs estimation
  • Facilitation of Customer meetings and workshops
  • Project Plans & Procedures
  • Project progress and reporting
  • Interface Plans and Definitions
  • Technical Documentation Development and Writing
  • Factory Construction Processes
  • System Integration & FAT Processes
  • Equipment Installation Processes
  • Test & Commissioning Processes
  • Quality assurance
  • Change management process

Apply / Know more …

Job Description.

• Experience with digital solutions in process automation, such as SCADA, PLC, and industrial communication protocols like Modbus, OPC UA
• Knowledge on the programming languages (Functional Block, Structure Text) for DCS configuration and control.
• Configuration, Runtime and diagnostic of the Eco Structure Foxboro DCS
• Configuration of HMI
• Strong understanding of system interactions and integration testing methodologies.
• Knowledge on security Testing
• Experience with debugging tools and troubleshooting techniques

Apply / Know more …

Job Description.

• • Lead the design, development, and implementation of advanced control systems including DCS, PLC, and SCADA solutions.
  • Review and analyse P&ID drawings, control schematics, and instrumentation layouts to ensure system integrity and compliance.
  • Prepare and approve detailed control panel wiring diagrams, wiring schedules, terminal diagrams, and loop diagrams.
  • Develop and optimize control logic, scripts, and HMI screens to enhance process automation and monitoring.
  • Provide technical guidance and support during the installation, commissioning, and troubleshooting of control systems.
  • Conduct system integration, testing, and commissioning activities ensuring seamless operation of automation solutions.
  • Collaborate with multidisciplinary teams to resolve complex control system issues and implement improvements.
  • Ensure all automation activities adhere to safety standards, industry regulations, and company policies.
  • Document system configurations, modifications, and maintenance procedures for future reference and compliance.
  • Mentor junior engineers and team members promote best practices in control system engineering.

  Qualifications

  • Bachelor’s degree in engineering (Instrumentation & Control, Electronics, Electronics & Telecommunication Engineering or related field).

  Preferred Skills & Experience

  • 3-4 years of experience
  • Prior hands-on experience with designing or working on DCS, PLC, or SCADA systems will be an advantage.
  • Familiarity with reading and interpreting P&ID drawings and preparing control panel diagrams is desirable.
  • Experience in wiring, configuration, or troubleshooting control systems in industrial environments will be considered a plus.
  • Certification or training in Siemens DCS, PCS7, Schneider’s Siemens PLC or related automation platforms will enhance candidacy.
  • Exposure to power plant automation or industrial process control projects will be beneficial.

  Personal Attribute / Trait

  • Excellent Interpersonal and Communication skills.
  • Must be detailed oriented.
  • Ability to work safely in industrial environment.
  • Creative & Initiative skills for value addition.
  • Must be self-motivated.

Apply / Know more …

Job Description.
BE or BTech in Electronics /Instrumentation/Electrical.

Skills and Competency :a) DCS Engineering/ Scada Engineer – Understanding specifications & implementation,
b) Good communication skills
c) Customer focus to ensure quality engineering
d) Self motivated and self learning.
e) To be a lead in the team and ensure the completion of job.
f) Preparation of engineering documents.
g) Have good knowledge in SCADA and is able to deliver as per the requirement of customer.

Apply / Know more …

Job Description.

• Analyse customer inputs and understand requirements such as Design Specifications, P&IDs, Control Narratives, IO list, Instrument Index, Operating Philosophies etc.
• Raise Technical Queries
• Develop System Design
• Perform I/O to Controller Assignment
• Define Software Concepts
• Define third party interfaces (Modbus, Profibus, OPC etc.)
• Develop SW library (Logic as well as graphics)
• Develop project specific SW typicals
• Perform SW Typical Test
• Design & Develop I/O & base control modules
• Develop customized logic
• Develop complex logic
• Develop graphics
• Develop Third party interface database/modules
• Develop Internal test plan
• Perform Internal testing
• Perform Third Party Interface test
• Develop SW FAT plan
• Develop HW-SW Integration plan
• Perform Integrated testing between SW & HW
• Perform FAT with customer
• Develop As Built documentation
• Develop SAT plan
• Perform SAT at customer location
• Loop checks at site
• Startup & Commissioning support

TECHNICAL SKILLS

• Knowledge of Project execution cycle
• Knowledge of DCS logic/graphic development & testing
• Knowledge of Function Block Diagram, Sequential Flow chart, Ladder Logic
• Knowledge of DCS hardware
• Ability to recognize and respond to dynamic demands
• Ability to related with different groups of people in various levels of organization
• Pragmatic approach to work and work environment
• Excellent written and verbal skill
• Good hands on MS Office knowledge specifically, Ms Word, Excel, Access, powerpoint, Visio etc.
• Should be able to work in multi cultural virtual environment
• Team player
• Can work with minimum supervision
• Flexible approach to work
• Good Interpersonal skills

Quality Control & Assurance

• Implementation of EEEC IMS processes/documentation as & when required throughout the project.
• Adopts to WA quality requirements and Customer’s regulatory guidelines
• Practices and promotes First time right approach.
• Strictly follows GDP (Good Documentation Practices).

Other Duties

Perform other additional specific duties, when requested by the business. These will, typically, be strategic in nature but could potentially be anything that the post holder is suitably qualified and experienced to undertake. These duties may be assigned to the person under guidance of a supervisor.

Preferred Qualifications & Experience that Set You Apart:

Must be a bachelor graduate in Instrumentation, Electronics, Electronics & Telecommunication

minimum 5 years of experience in relevant field.

Apply / Know more …

Job Description.

• We are seeking an experienced and detail-oriented Industrial Automation Engineer with strong expertise in designing, developing, and implementing automation solutions using Siemens PLC, SCADA, and HMI systems. The ideal candidate will have hands-on experience with TIA Portal, PCS 7, WinCC platforms, and industrial communication protocols, along with a solid understanding of process control and instrumentation.Key Responsibilities:PLC, SCADA & HMI Development:
  • Design, develop, and program automation systems using Siemens PLCs (S7-300/400, S7-1200/1500, PCS 7) with knowledge of Ladder Logic, Structured Text (ST), FBD, and CFC.
  • Develop SCADA and HMI applications using WinCC Classic, WinCC Professional, WinCC Unified, and Basic/Comfort HMI panels.

  Industrial Communication & Integration:

  • Configure and integrate field devices and systems using Profibus, Profinet, Modbus, EtherNet/IP, and OPC UA.
  • Troubleshoot and resolve communication and device integration issues across control networks.

  Process Automation & Control:

  • Implement and optimize PID control loops, batch processing logic, and instrument calibration.
  • Collaborate with process and instrumentation teams to ensure control strategies align with plant operations.

  Project Execution & Documentation:

  • Lead and participate in FAT (Factory Acceptance Testing) and SAT (Site Acceptance Testing).
  • Prepare and review technical documentation, including control philosophy, I/O lists, wiring diagrams, and validation reports.
  • Conduct risk assessments, manage on-site commissioning, and provide post-installation support.

  Required Skills & Experience:

  • PLC Platforms: Siemens S7 (300/400/1200/1500), TIA Portal, PCS 7
  • SCADA & HMI: WinCC Classic, Professional, Unified; Basic/Comfort HMI
  • Programming Languages: Ladder Logic, Structured Text, Function Block Diagram (FBD), CFC
  • Industrial Protocols: Profibus, Profinet, Modbus, OPC UA, EtherNet/IP
  • Process Knowledge: PID Control, Batch Logic, Instrumentation
  • Tools: TIA Portal, Simatic Manager, WinCC Engineering, Microsoft Office, AutoCAD (preferred)

  Soft Skills:

  • Strong troubleshooting and analytical skills
  • Excellent documentation and reporting ability
  • Good interpersonal and communication skills
  • Ability to work independently and within project teams
  • Strong focus on quality, safety, and compliance

  Preferred Qualifications:

  • Bachelor’s Degree/Diploma in Instrumentation, Electrical, or Electronics Engineering
  • 3+ years of experience in Siemens-based industrial automation projects
  • Experience across sectors like pharmaceuticals, oil & gas, chemicals, or utilities
  • Siemens certification (TIA Portal / PCS 7 / WinCC) is a plus

Apply / Know more …

Job Description.

• Extensive understanding of industrial automation and control systems
• Technical leadership within PLC/HMI/SCADA projects relates to Wonderware/AVEVA System Platform and Wonderware Intouch.
• Exposure on Legacy control system upgrade or PLC and HMI migrations.
• Experience with integration of Wonderware HMI with Control systems like PLCs, Historian products and integration with MES and Business layer applications using edge technologies like MQTT protocol, web services etc.
• Good hands-on expertise in AVEVA system platform design, development, and integration with third party applications.
• Experience in Ignition SCADA OR Rockwell FT View Site Edition SCADA design & development.
• Worked on different communication protocols and OPC DA drivers, OPC UA for plant floor connectivity. Integration with enterprise layer i.e. MES systems or Enterprise database connectivity.
• Experience in AVEVA process historian, Alarm database connectivity, configuration and database management.
• Experience of application set up, installation & configuration.
• Experience with SAT/FAT (testing) & commissioning of control system.
• Experience with control system application Upgrades & Migrations
• Experience of control system project execution in pharma domain
• Project specific documentation creation
• Hands-on experience in Rockwell PLC would be an added advantage.
• Awareness with standards like ISA-95, ISA-88

Must have

• AVEVA system Platform, Wonderware Intouch

Good to have.

Knowledge on Ignition SCADA, KPI dashboards/reporting, Industrial Historians

Web based data integrations.

.Net, VMWare, SQL

Roles & Responsibilities

• Responsibilities-

• Focus on Controls and Automation projects to support installation of new Controls systems components and upgrade of existing Control systems.
• Design & development of control system solution.
• Requirement Understanding, Design & development of control systems, plant engineering, Control & Automation site support.
• Offshore support for PLC programming and online debugging, FAT, SAT, controls and automation related troubleshooting, code modifications in PLCs & HMIs, Offshore coordination with engineering team during validation cycle.
• AVEVA system platform, Wonderware Intouch SCADA/HMI OR FactoryTalk View SE Testing & commissioning.
• Testing support & Project execution on shop floor and project documentation, project status reporting

Apply / Know more …

Job Description.

• Design, develop, test, and maintain PLC programs preferably using Modicon M580, M340 controllers.
• Program HMI interfaces to monitor and control industrial processes.
• Implement SCADA systems for data acquisition and processing.
• Collaborate with cross-functional teams for engineering, installation and commissioning.
• Proficiency in working on HMI (Vijeo Designer) & SCADA (Aveva Plant SCADA, Aveva System platform, GeoSCADA, EcoStruxure Process Expert) systems.
• Develop technical competency within team by sharing knowledge & guiding junior team members.
• Exposure of working in Oil & Gas, Water & Wastewater, Infrastructure (Metro, Building) projects.
• Knowledge in ERP, MES and IoT will be an added advantage.
• Hands on with database management tools like SQL server, Microsoft Access etc. is preferred.
• Skills: Networking, Panel Design, Customer handling, Cross function-collaboration, Analytical Thinking, Programming, Scripting.

B.Tech/B.E. in Electrical / Electronics / Computer Science Engineering

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Apply / Know more …

Job Description.

• Primary Partner assisting the Global Technical Leader, often assigned to strategic initiatives to enable a business unit to adopt company standards
• Senior Consultancy for staff Engineering with regards to standardized procedures and workflows, tools and preferred suppliers
• Creation of standard tools as directed by Global Technical Leader, for use by all global business units
• Creating and managing a pipeline of Engineering standardization activities- Identifying opportunities to consolidate process software programs and part numbers across the global engineering groups
• Keeping Xylem current on trends and new tools and practices for Automation
• Liaison with Xylem India and engineering shared services to facilitate execution of Controls Engineering in projects and standard product programs
• Schedule flexibility to support global commissioning of systems
• Up to 15% travel may be required.

Education/Experience

• BS in Electrical / Instrumentation & Controls Engineering or equivalent combination of education and experience
• 10+ years foundational programming and architecting experience creating and using modular software structures such as ISA function blocks and faceplates
• 10+ years of experience with Siemens, Rockwell Automation and/or other globally recognized Control System suites
• Experience in applying ISA standards to Control System implementation preferred
• Experience and desire to create staff training resources, especially videos
• Ability to provide technical guidance and remote troubleshooting to staff as they learn new techniques
• Elite communication skill – the ability to document a solution so that all staff are able to implement with minimal guidance
• Excellent organizational skills – stockpiling knowledge and solutions on behalf of the company
• Strong leadership, organization and interpersonal skills.

Apply / Know more …

Job Description.

• System Engineer to 2-5yrs (DSC/PLC/HMI)Roles and Responsibilities Overall responsible for the complete technical requirements of the project, and technical deliveryof the project hands on experience. Read customer RFQ, Table of Compliance from complete technical requirement point of view. Preparation of KOM and its related documents Identification of the Risks and Opportunities on the technical side at the initial stage of projects Coordinating with the internal cross functional team like factory, procurements, Software,Engineering etc. Prepare bill of material, functional design documents Design system architecture Responsible for engineering deliverables and ensure standard engineering practice Understand required prerequisites / design inputs required from the customer and their timelinesfor meeting required project schedule Understand and document the detailed project schedule technical activities along withinterdependencies. Integrate various deliverables from different delivery centers (like instrumentation engineering,controls engineering, software engineering) into a format as required by the customer Ensures that the engineered solution meets project requirements in terms of functionality,standards, quality, and supporting documentation Handle entire technical communications with the customer till final close out of the project Review the estimates provided by different delivery centers Get technical query resolutions from the customer

   Attend customer meetings for seeking query resolutions, drawings / documents approval, QAP

  Approval ,technical change order approvals

   Driving Change orders using the technical scope.

   Approval of vendors drawings, advise to PM on giving Manufacturing clearance, dispatch

  clearance to the vendors.

   Reports technical progress and technical problems to PM.

   Technically Supporting to PM for the billing of milestone payments and collection

   Identify technical risks and suggest mitigations during project schedule

   Interact with vendors for technical requirements, technically review offers

   Interact with I&C contractor for defining I&C scope, checking I&C progress, listing balance I&C

  activities

   Conduct FAT and SAT with customer

   Forecast resource requirements in the project

   Responsible for adherence to HSE Policy and Guidelines at office area as well as project sites.

   Assist project manager for technically closing the site

  Platforms

  DCS

   Yokogawa

   Emerson

   ABB

   Rockwell

   GE

   Honeywell

  PLC / SCADA

   Siemens

   Rockwell AB

   Schneider

   GE Fanuc

   Honeywell

  Safety Systems

   Any Safety Systems

  Windows Platforms / Office Applications

   WIN 2003 server , WIN 2008 server

   WIN XP, WIN 7

   Microsoft Excel, Word & Power-point

   MS Projects

   SAP

  Behaviours

   Growth and Customer Focus

   Gets Results

   Leadership Impact

   Fosters Teamwork and Diversity

  •  Technical or Functional Excellence

Apply / Know more …

Job Description.Non-Technical:

• Excellent written, verbal, technical and interpersonal communications skills.
• Ability and flexibility to travel for requirement gathering, discussions and project delivery.
• Proficient with Microsoft Office; Word, Excel, Outlook, Project

Technical:

• 6-9 years of relevant Industry experience
• Experience with WONDERWARE SCADA, SYSTEM PLATFORM, InTouch and/or industrial control systems; PLCs, HMIs
• Understands SCADA development lifecycle
• Hands on experience in 3rd party integration (2 different PLCs / PLC & DCS).
• Has done Projects or Systems Engineering on multiple PLC, DCS and SCADA systems.
• Experience in extracting, mapping of IOs for SCADA system.
• Experience in creating HMI/UI graphics and application.
• Experience in Installation and Commissioning, System platform Migrations, Maintenance and Troubleshooting, FAT and SAT for SCADA/HMI projects.
• Design, configuration, programming, testing, and/or configuration of PLCs, DCS, and/or RTUs
• Design, configuration, programming, testing, and/or configuration of HMIs
• MUST be able to read, P&ID, Understand Flow charts, Cause & Effect Diagrams, Boolean Logic diagrams, etc.
• Strong networking skills (Ethernet, serial, and wireless)
• Knowledgeable on Industrial communication protocols
• Write the script and code modules for HMI

Nice To Have:

• C, C#, C++ or .NET programming experience
• VB and scripting language experience
• SQL and relational database experience

India Benefits include:

Gratuity, Medical and accidental insurance, very attractive leave entitlement, emergency leave days, childcare support, maternity, paternity and adoption leaves, education assistance program, home office set up support (for hybrid roles), well-being support

It’s possible we’re hiring for this position in multiple countries, in which case the above benefits apply to the primary location. Specific benefits vary by country, but our packages are similarly comprehensive.

Find out more: aveva.com/en/about/careers/benefits/

Hybrid working

By default, employees are expected to be in their local AVEVA office three days a week, but some positions are fully office-based. Roles supporting particular customers or markets are sometimes remote.

Hiring process

Interested? Great! Get started by submitting your cover letter and CV through our application portal. AVEVA is committed to recruiting and retaining people with disabilities. Please let us know in advance if you need reasonable support during your application process.

Apply / Know more …

Job Description.Non-Technical:

Control System Engineer 2-6 years exp OEM System / Industrial Automation Nashik location

Bachelor’s degree in Electronics / Electrical / Instrumentation or equivalent

Salary Bracket UP to Rs. 5-10 lpa

Total open position 15 candidates.

Exposure to OEM platforms (Siemens, ABB, Honeywell, Rockwell, Yokogawa, etc.).

Knowledge of process automation.

Experience in handling Project activities, FAT/SAT and site commissioning activities.

Proficiency in PLC, DCS, and SCADA configuration and testing.

• Strong understanding of field instrumentation and control system interfaces.

• Familiarity with industrial communication protocols (e.g., Modbus, OPC, Profibus, Ethernet/IP).

• Ability to read and interpret technical documents (I/O lists, P&IDs, control narratives, logic diagrams, C&E charts).

Interpret and implement customer inputs such as I/O lists, P&ID diagrams, control narratives, logic diagrams, and Cause & Effect charts from a system configuration perspective.

• Configure control systems (PLC, DCS, SCADA), including:

o Graphics development

o I/O database configuration

o Control loop setup

o Logic development and functional testing

• Integrate field instrumentation with control systems and validate interfaces.

• Establish and configure communication protocols for third-party system integration.

• Participate in system architecture design and support the complete project lifecycle from design to commissioning.

• Collaborate effectively within a team and maintain strong interpersonal communication.

• Travel to client sites as required for project execution and commissioning

Apply / Know more …

Job Description.

• End to End project design & engineering
• Efficient execution of Greenfield Power & Water as well as Lump Sum Turn Key (LSTK) projects.
• Should have adequate experience in Hardware Engineering, Panel design, Understanding the Network Architecture, Exposure to Buyouts
• Understanding of buyouts such as (HMI, Servers, Cables, Control desk/furniture, Field Instruments, Relays, Barriers, HMI, UPS, Chargers, LVS etc.).
• Experience to build Bill of Material with support of manufacturing teams for achieving the desired result.
• Site walk-downs for data collection, IO list preparation.
• Experience in preparation of cable schedule, engineering documentation, TQs and business/customer correspondence.
• Understanding of the project cycle, time management and production phases.
• Awareness to technical risk during project execution and site activities.
• Experience in Pre-FAT and Conducting customer FAT (HW & SW) and SAT.
• Exposure to the support Procurement team and creating procurement requisition.
• Working with contractors / sub-contractors and Vendors.
• Close collaboration and communication with team members located at different geographical locations, including vendors & sub-contractors.
• Verification and functional testing of I/O interfaces to field devices and Supervision of control system installation, commissioning and start-up.

Who You Are:

You pursue everything with energy, drive, and the zeal to succeed. You deliver messages in a clear, compelling, and concise manner and actively listen. You lay out a detailed schedule and steps for achieving objectives and use landmarks to track and handle the progress of the work. You have the basic Third-party communication skills like Modbus, Profibus, OPC etc. You are aware about the basic industrial automation sector norms and best practices.

For This Role, You Will Need:

• Degree in Engineering or Equivalent (Electronics & Communication, Instrumentation & Control, or equivalent field)
• 10-15 years’ project engineering experience in field of DCS / PLCs and exposure to commissioning.
• Hardware design exposure, Procurement exposure.
• Control design, implementation, process testing for Power and related process Treatment plants.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form.
• Proficiency with ISA and SAMA logic symbols, Process & Instrumentation Diagrams (P&IDs), electrical, mechanical, and hydraulic schematics

Preferred Qualifications that Set You Apart:

• Excellent written and verbal communication skills
• Problem-solving, decision-making, and planning skills
• Ability to write reports, business correspondence and commissioning documents
• Ability to optimally present information and respond to queries from management, clients, and customers.
• Proficiency with one or more DCS/PLC platforms (e.g., ABB Pro Control / Bailey INFI 90 / Symphony Harmony, Yokogawa Centum VP / CS3000, Siemens T3000 / TXP, GE Mark V / VI, Mitsubishi DIASYS Netmation, Invensys, Honeywell TDC3000, MaxDNA, MetsoDNA, Alstom Alspa320, Allen Bradley / GE-Fanuc / Schneider / Siemens PLCs & SCADA etc.)
• Knowledge of datalinks (Modbus RTU / TCP-IP, ELC, Profibus, OPC)

Apply / Know more …

Job Description.

• Execute Advanced Process Control/Plant wide Optimizer projects including assessment, kick-off, pre-test, plant test, design, modeling, configuration, installation, commissioning, and post-audit.
• Implement RMPCT Advanced Process Control/Plant wide Optimizer/Control Performance Monitor technologies as Lead Consultant/Engineer
• Perform/Participate in Advanced Process Control/Plant wide Optimizer studies, proof of concepts/trial evaluation and provide user training.
• Review the economic targets for the Advanced Process Controllers, suggest and incorporate necessary changes, to provide the right direction to the controllers. This may be required to incorporate the new economic indicators, if any, and make the controller to constantly work towards the current economic objectives.
• Identify, advise, and incorporate modifications to the controller configuration, in terms of proposing addition of new variables/ constraints, deletion of the redundant variables, wherever found necessary.
• Identify faulty regulatory control loops in the system (DCS level) and carryout tuning of existing regulatory controller at Distributed control systems.
• Lead cross function teams such as the Customer Support and R&D to resolve Advanced Process Control/Plant wide Optimizer issues.
• Support Sales and Marketing to grow Advanced Process Control/Plant wide Optimizer licenses and services business.
• Support and train junior personnel

Qualifications

Has a at least 10+ years of experience in refining/petrochemical, MMM industry.

• Has a background in Chemical Engineering principles and operations.
• Knowledge of regulatory control and advanced control.
• Understands optimization principles. Experience in implementing global optimization programs is advantages.
• Good communication and writing skills.
• Knowledge of Advanced Process Control/Plant wide Optimizer, DCS and real-time database technologies.
• Good team player. Strong ability to maintain good working relationship with customers.

WE VALUE

• Demonstrated project experience implementing commercial off-the-shelf software for APC such as DMC3/DMC Plus, SMOC, PACE, ROMeo.
• Experience in deploying APC or maintenance management strategies in an operating company.
• Candidates having experience in plant operations.
• Experience in plant startup & commissioning
• Configuration experience working on control systems, DCS / PLC / Safety Systems.
• Advanced post graduate degree in a technical discipline.

Apply / Know more …

Job Description.Location:

Noida, India, UP, IN

Requisition ID: 1191

Description

Hanwha Ocean is undergoing a transformative journey, evolving from a traditional sh

The Offshore Business Division is proud to announce the establishment of new Global Business Centers marking a significant milestone in our journey toward becoming a project-centric and client-driven organization. This strategic expansion enhances our ability to deliver exceptional project execution and knowledge-driven operational models by seamlessly integrating the upstream cultures of Asia, Europe, and America.

Explore opportunities to be part of our dynamic team and contribute to groundbreaking projects that redefine the offshore industry.

Position Overview

Senior Instrumentation & Control Engineer conducts the Instrumentation & control detail engineering activities mainly for Topside facilities in FPSO/FLNG or Offshore facilities.

Senior Instrumentation & control engineer assist the discipline in developing corporate technical standards/procedures, workflow, engineering platform (e.g. Instrument design data integration) and keep them updated, integral, practical and fit to purpose with incorporating Project Lesson Learns.

Senior Instrumentation & Control Engineer mentors Instrumentation & control engineers in the Discipline.

Senior Instrumentation & Control Engineer conducts technical validation and quality assurance (input/output data accuracy, technical appropriateness, consistency, practicality, code, optimum solution and regulatory compliance) in executing Feasibility /Conceptual Study/Pre-FEED/FEED, EPCI Engineering for FPSO/FLNG or Offshore facilities projects.

This role may require frequent travel to the US, Europe, and Asia.

The strategic focus will also include providing support to Hanwha Ocean engineering teams based in USA/Netherland/Singapore/India and elsewhere as necessary including Conceptual, pre-FEED and FEED for projects in the offshore area in the future.

Key Responsibilities

• Assist Topside Instrumentation & Control Head of Discipline / Senior person to manage corporate organization
• Support the Discipline to Update and Maintain EPCI and O & M Phase Lesson Learnt database
• Ensure all engineering documents are prepared and developed in accordance with relevant design code, standard and client’s project specification.
• Provide engineering review and support for bid proposal including estimate of manhour and cost.
• Raise Technical Queries towards the client’s project documents, Design basis to ensure all scopes of work and design basis are clarified.
• Manage interface with all relevant disciplines to get necessary information for Instrumentation & control engineering or to provide data to other disciplines for their engineering
• Mentor junior or less-experienced Instrumentation & control engineers
• Report Area of Concerns, Progress and Plan to Lead Engineer and/or Head of Discipline
• Ensure Compliance with regulatory requirements
• Develop Project Design Philosophies, Standards, Procedure
• Working in Engineering Software – SPI, AVEVA Instrument, Instru Cal
• Conduct feasibility studies, Pre-FEED, FEED, FEED Verification (Inception of EPCI Phase) and EPCI phase Engineering
• Develop Instrument calculations, studies and deliverables
• Close out comment/punches/recommendation from HAZOP, Vendor HAZOP, HAZID, SIL, 3D Model, Constructability Review etc.
• Review and Approve Vendor Documents, Instrumentation & Control Deliverables and inter disciple documents
• Provide engineering support for construction, commissioning and operation team
• Ensure issuance of as-built Instrumentation & Control deliverables

Qualifications

• Minimum bachelor’s degree in Instrument/ Electronics & communication or equivalent Engineering
• Minimum 10 years’ experience with 3 years’ experience at FPSO contractor or Offshore/Onshore EPC contractor
• Working experience in Engineering Software – SPI, AVEVA Instrument, Instru Cal
• Ability to work effectively independently and as part of a multidisciplinary team, with strong attention to detail and accuracy. ability to manage multiple priorities
• Ability to work with and to communicate effectively with co-workers, vendors, clients and manage multiple priorities.
• Fluent in English, with strong oral and written communication skills

Apply / Know more …

Job Description.

We are looking for Design Engineer – Instrumentation & Control to join our Global Engineering Unit Team.

At IDOM, we can offer you the opportunity to outdo yourself every day, developing your professional career while working on national and international projects, in an environment of collaboration and teamwork. You will be part of a multidisciplinary group where you will be a key player. You will get to experience different businesses and technologies in a flexible and supportive work setting.

If you join IDOM, you will find:

• Work-life balance
• Medical and accident insurance
• Long-term career path
• Everyone has the possibility of becoming a partner
• Multicultural and multidisciplinary environment
• Possibility of taking on responsibility
• Mutual commitment
• Unifying Interpersonal relationships

ABOUT YOU

Apply if you have these skill sets…

• We’re in process of hiring skilled professionals at multiple levels with over 5 years of experience.
• Bachelor’s degree in Instrumentation & Control Engineering.
• Detail design for industrial projects such as Power Plants and Oil & Gas facilities.
• Experience in preparing engineering deliverables and working within design consulting environments.
• As a Design Engineer I&C you will have experience on preparing and review:

• Cable lists and cable routing

• Wiring diagrams

• Instrument technical specifications and data sheets

• Control system specifications

• I/O lists and functional descriptions

• HMI design and logic diagrams

• Ensure compliance with project standards and industry codes.
• Collaborate with multidisciplinary teams to deliver high-quality engineering solutions.
• Prior experience in internatinal design engineering consulting companies.
• CTC – Attractive Package based on candidate experience
• How to work as part of a team and with technical rigor.
• How to work independently with an innovative spirit.
• An advanced level of English.
• Above all… are eager to learn in a multinational firm such as IDOM.
• Qualification – B. Tech / M. Tech ( Civil ) or equivalent education.

Apply / Know more …

Job Description.

• Bachelor’s degree in Instrumentation & Control Engineering
• 10-15 Years of experience in Control engineering/design and detail engineering for process or plant systems.
• To be able to Work with minimal guidance & complete the assigned task.
• Product knowledge on centrifugal compressor, Reciprocating Compressor, Gas Turbines and steam turbine (Rotating equipment)
• Ability to understand and implement design standards and configuration
• Ability to work in a global environment

We are known for our extraordinary people who make the impossible possible every day. Questians are driven by hunger, humility, and aspiration. We believe that our company culture is the key to our ability to make a true difference in every industry we reach. Our teams regularly invest time and dedicated effort into internal culture work, ensuring that all voices are heard.

We wholeheartedly believe in the diversity of thought that comes with fostering a culture rooted in respect, where everyone belongs, is valued, and feels inspired to share their ideas. We know embracing our unique differences makes us better, and that solving the worlds hardest engineering problems requires diverse ideas, perspectives, and backgrounds. We shine the brightest when we tap into the many dimensions that thrive across over 21,000 difference-makers in our workplace.

Work Experience

Working experience on

UCS Project Design Summary

Control System Schematic & Power Supply Schematic

UCS Layout & Main Component List

UCS I/O List

Cause & Effect Chart

Control System Functional Description

Functional Logic Diagram

UCS Interconnecting Wiring Diagram

F&G Functional Specification

Safety System (SIS) Functional Specification

Vibration Monitoring System Configuration Work Sheet (BN3500 and/or Orbit60)

Intrinsically Safe Loop Calculation Sheet

Instrument Loop Diagram (ISA STD)

Apply / Know more …

Job Description.

• • Excellent written, verbal, technical and interpersonal communications skills.
  • Ability and flexibility to travel for requirement gathering, discussions and project delivery.
  • Proficient with Microsoft Office; Word, Excel, Outlook, Project

  Technical:

   

  • 9 -12 years of relevant Industry experience
  • Experience with WONDERWARE SCADA, SYSTEM PLATFORM, InTouch and/or industrial control systems; PLCs, HMIs
  • Understands SCADA development lifecycle
  • Hands on experience in 3rd party integration (2 different PLCs / PLC & DCS).
  • Has done Projects or Systems Engineering on multiple PLC, DCS and SCADA systems.
  • Experience in extracting, mapping of IOs for SCADA system.
  • Experience in creating HMI/UI graphics and application.
  • Experience in Installation and Commissioning, System platform Migrations, Maintenance and Troubleshooting, FAT and SAT for SCADA/HMI projects.
  • Design, configuration, programming, testing, and/or configuration of PLCs, DCS, and/or RTUs
  • Design, configuration, programming, testing, and/or configuration of HMIs
  • MUST be able to read, P&ID, Understand Flow charts, Cause & Effect Diagrams, Boolean Logic diagrams, etc.
  • Strong networking skills (Ethernet, serial, and wireless)
  • Knowledgeable on Industrial communication protocols
  • Write the script and code modules for HMI

  Nice To Have:

   

  • C, C#, C++ or .NET programming experience
  • VB and scripting language experience
  • SQL and relational database experience

Apply / Know more …

Job Description.

• • • Collection and review of project inputs from the customer site through e-mail, kick off meeting, site survey
    • Primarily Execute DCS retrofit projects, with occasional greenfield too
    • Software and hardware engineering and configuration
    • Ability to read electrical single-line diagrams (SLDs), P&IDs and switchboard control logic drawings
    • Retrofit- To implement controls from old logics from systems like Alspa P320, Ovation, Toshiba, Yokogawa, Allen bradely, Rx3i etc
    • GreenField -To implement controls from SAMA, functional diagrams or functional descriptions;
    • Modifications of DCS graphics; creation of faceplate macros, control macros and their testing
    • Creation/modification of DCS internal point database; extraction of HW IO list from customer drawings; preparation of database; querying with HW team and customer for any clarifications needed
    • Preparation and guiding the team on IO list
    • Experience of building blocks of DCS system like various Binary gates, A/M stations, PIDs etc. and their testing
    • Implementation of analogue and digital simulation logic for first pass and tie-back simulation testing of implemented controls and graphics
    • Guide the drafting of HW engineering drawings like system architecture, general assembly (GA) and network architecture
    • Configuration on 3 rd party protocols (Modbus, Profibus, OPC etc.).
    • Engagement in customer demos, FATs, SWAT activities
    • Working knowledge of industrial standards like IEEE, IEC, NEC, and Grid codes
    • Understands and has aptitude to follow strict procedural guide lines and adherence to standards.
    • Has penchant for preparing design and test documents.

    Quality Control & Assurance

     

    • Implementation of QMS processes/documentation as & when required throughout the project.
    • Adopts to quality requirements and Customer’s regulatory guidelines
    • Following department Quality HSE processes and procedures
    • Practices and promotes First time right approach.
    • Strictly follows GDP (Good Documentation Practices).

    We are known for our extraordinary people who make the impossible possible every day. Questians are driven by hunger, humility, and aspiration. We believe that our company culture is the key to our ability to make a true difference in every industry we reach. Our teams regularly invest time and dedicated effort into internal culture work, ensuring that all voices are heard.

    We wholeheartedly believe in the diversity of thought that comes with fostering a culture rooted in respect, where everyone belongs, is valued, and feels inspired to share their ideas. We know embracing our unique differences makes us better, and that solving the worlds hardest engineering problems requires diverse ideas, perspectives, and backgrounds. We shine the brightest when we tap into the many dimensions that thrive across over 21,000 difference-makers in our workplace.

    Work Experience

     

    • Minimum 3 to 5 years’ experience exclusive in DCS system software configuration and testing while working for a engineering organisation; PLC configuration knowledge preferable.
    • BE/BTech in Instrumentation/ Electronics or any related or equivalent field.
    • Basic understanding of networking protocols and concepts.
    • Excellent written and verbal communication skills.
    • Experience in MarkVIe DCS is preferred . Other DCS can be of Honeywell, Yokogawa, ABB, Emerson etc.

Apply / Know more …

Job Description.

• • • In this role, you will have the opportunity to execute service work with low to medium complexity as per work instructions and in accordance with ABB standard processes, quality standards, and safety guidelines. Each day, you will plan and execute work on a first-time right approach with customers. Your responsibilities will include demonstrating a solid grasp of priorities and attentiveness within your designated duties.The work model for the role is: – OnsiteThis role is contributing to the Process Automation – Energy division in India region.You will be mainly accountable for:
      • Delivered on-site and remote service support for ABB 800xA Automation Systems in the Oil & Gas industry, including troubleshooting, issue resolution, and field service of medium to high complexity.
      • Identified technical issues and improvement opportunities during customer interactions, resulting in root cause analysis and recommending corrective and preventive actions.
      • Supported brownfield service bids by providing technical authority and solutioning support during the proposal phase, including customer presentations.
      • Ensured service readiness by preparing material lists and coordinating the availability and quality of parts, tools, and equipment.
      • Promoted a culture of continuous improvement by documenting best practices, tracking site issues, and implementing improvements to enhance field service quality and profitability.
      • Maintained high standards of safety and customer communication, ensuring safe execution of work and consistently improving customer satisfaction.

      Qualifications for the role:

       

      • Have 5–10 years of practical experience in service engineering for ABB Symphony or 800xA systems in the Oil & Gas sector.
      • A solid foundation in process control and instrumentation within diverse processing facilities, showcasing skills in DCS hardware and application engineering, HMI design, library creation, third-party communication, testing, and commissioning.
      • Extensive experience with ABB System 800xA for at least 2 years; familiarity with other ABB systems like Freelance, and communication protocols such as Profibus, Modbus, and OPC would be beneficial.
      • Skilled in executing brownfield DCS projects including application modifications, retrofits, controller migrations, and on-site commissioning.
      • Exposure to cybersecurity solutions, virtualization, and digital technologies.
      • Full-time diploma or degree holder in Electrical, Electronics, or Instrumentation Engineering; capable of effective communication in English (written and verbal).

Apply / Know more …

Job Description.

• Supervision Received – Receivestechnical and administrative supervision from Engineering Group Supervisor.
• Supervision Exercised – Provide technical direction as appropriate to drafters, technicians and GETs and Junior Engineers who perform specific design support assignments.
• Contacts – Maintains contact with the immediate work group or discipline and interfaces with other disciplines as specifically directed.

Major Responsibilities

• Preparation of Design Criteria for Controls and Instrumentation.
• Performs control valve, flow element and thermowell sizing calculations and basic preliminary analyses.
• Preparation of Instrumentation Specification for Mechanical Packages and vendor print review.
• Development of Spec, MR and Vendor Print Review of Analyzer System, Fiscal Metering and Machine Monitoring Systems.
• Assists in developing or reviews discipline material quantity estimates.
• Preparation of Complex Loop Control Narratives, Cause and Effect Matrix for Process and F&G System, logic narratives.
• Development of I/O database for DCS, SIS, F&G and Mechanical Vendor Packages.
• Preparation of Instrument Index, Data Sheet, Wiring and Loop Diagrams, Loop Folders, Calculation in Smart Plant Instrumentation.
• Preparation of Technical Specification, Datasheet, Technical interrogatives, Technical Bid, Analysis (TBA) of the various Supplier’s offers for various instruments like: Transmitters, Temperature Elements, Mass flow meters, etc.
• Preparation of Level Sketches and Cable Block Diagrams.
• Preparation of Instrument Installation Details, Bulk Material Take off and assist designers in Modelling of instruments, junction boxes and allocation of Remote I/O’s and Cross wiring between DCS.
• Participation in 3D Model Review Sessions, Hazop and SIL/LOPA Reviews.

Education And Experience Requirements

• B.Tech in Instrumentation & Control from a recognized university.
• Level 1: 12 – 16 years of industry experience.
• Level 2: 16+ years of industry experience.

Required Knowledge And Skills

• Basic technical knowledge of Control System engineering in Oil and Gas, Mining and Metal, Infrastructure etc…Projects.
• Thorough knowledge of discipline engineering techniques, the design of engineered systems, and engineering and design calculations.
• Understanding of industry regulatory codes and standards and design criteria pertinent to the particular engineering discipline.
• Broad knowledge of the application of engineering to plant constructability as applied to construction methods and materials.
• Understands the standard engineering work planning, scheduling and cost estimating.
• Job knowledge of various types of field Instrumentation, DCS, PLC, Hazardous areas is essential.
• Design experience or Basic knowledge of DCS / PLC and SCADA Networks, Fiber optic and CAT 6 is essential.
• Basic awareness industry standards Application Programs such as SPI, Smart Plant, Flowel.
• Basic awareness of industry or regulatory standards and design criteria pertinent to the particular engineering discipline.
• Basic skills in oral and written communication.

Apply / Know more …

Job Description.

• In this role, you will have the opportunity to act as the technical lead for all engineering activities in assignments. Each day, you will ensure the activities related to all engineering disciplines within the project are executed in an efficient and cost-effective manner. You will also showcase your proficiency by acting as a design authority for a particular engineering discipline and completing the corresponding engineering assignments.The work model for the role is: – OnsiteThis role is contributing to the in energy division.The main stakeholders are internal engineering teams, project managers, site commissioning teams, procurement, and external clients including EPC contractors and end users in the oil & gas sectorYou will be mainly accountable for:
  • Collaborating on project installation, commissioning, and site activities, to clarify potential issues or provide solutions to rectify the engineering errors.
  • Coaching the project engineers and designers on the translation of conceptual designs to engineering documentation, including modelling, prototyping, and calculations.
  • Leading, supervising, and coordinating teams (less than 10 members) in all engineering disciplines (both in-house and outsourced) on projects.
  • Applying design thinking or design for efficiency concepts in projects, including modeling, prototyping, simulation, and calculations.

  Qualifications For The Role (Mandatory)

  • Diploma/ Bachelor’s degree in Engineering (Electrical / Instrumentation / Automation or related discipline).
  • Minimum 8 years of relevant DCS engineering, with practical exposure in project execution, design, and commissioning.
  • Proficient knowledge of engineering standards, safety, cybersecurity, and quality requirements.
  • Experience acting as a technical lead or design authority on low-to-medium complexity projects.
  • Good communication skills and ability to work collaboratively in a global environment.
  • Willing to travel for site support and commissioning as required.

  More About Us The Energy Industries Division serves a wide range of industrial sectors, including hydrocarbons, chemicals, pharmaceuticals, power generation and water. With its integrated solutions that automate, digitalize and electrify operations, the Division is committed to supporting traditional industries in their efforts to decarbonize. The Division also supports the development, integration and scaling up of new and renewable energy models. The Division’s goal is to help customers adapt and succeed in the rapidly changing global energy transition. Harnessing data, machine learning and artificial intelligence(AI), the Division brings over 50 years of domain expertise delivering solutions designed to improve energy, process and production efficiency, as well as reduce risk, operational cost and capital cost, while minimizing waste for customers, from project start-up and throughout the entire plant lifecycle.

  We value people from different backgrounds. Could this be your story? Apply today or visit www.abb.com to read more about us and learn about the impact of our solutions across the globe.

Apply / Know more …

Job Description.

• • Design, develop, test, and maintain PLC programs preferably using Modicon M580, M340 controllers.
  • Program HMI interfaces to monitor and control industrial processes.
  • Implement SCADA systems for data acquisition and processing.
  • Collaborate with cross-functional teams for engineering, installation and commissioning.
  • Proficiency in working on HMI (Vijeo Designer) & SCADA (Aveva Plant SCADA, Aveva System platform, GeoSCADA, EcoStruxure Process Expert) systems.
  • Develop technical competency within team by sharing knowledge & guiding junior team members.
  • Exposure of working in Oil & Gas, Water & Wastewater, Infrastructure (Metro, Building) projects.
  • Knowledge in ERP, MES and IoT will be an added advantage.
  • Hands on with database management tools like SQL server, Microsoft Access etc. is preferred.
  • Skills: Networking, Panel Design, Customer handling, Cross function-collaboration, Analytical Thinking, Programming, Scripting.

   

  B.Tech/B.E. in Electrical / Electronics / Computer Science Engineering.

Apply / Know more …

Job Description.

• • Own the architecture and development of control systems for modular MEP equipment across cooling, power, plumbing and support utilities.
  • Define control strategies, sequences of operation, alarm logic, failover logic and interlocks across mechanical and electrical systems.
  • Develop PLC, HMI and SCADA code and oversee software integration with building management systems, EPMS and monitoring platforms.
  • Produce control architecture diagrams, network layouts, data models and interface specifications.
  • Lead cross-functional design reviews to ensure control systems align with mechanical, electrical and systems architecture requirements.
  • Review and approve vendor controls submittals, functional specifications, hardware selections and software implementations.
  • Validate system performance during FAT, SAT and commissioning, including troubleshooting controls, sensors, networks and automation workflows.
  • Coordinate with cybersecurity and IT teams to ensure controls networks meet security and reliability requirements.
  • Establish coding standards, documentation guidelines and version-control processes for internal and external partners.
  • Mentor controls engineers and support training for engineering, operations and commissioning teams.
  • Support continuous improvement of the MEP modules by identifying opportunities for automation, optimization and predictive insights.

  What You’ll Need

  • Bachelor’s degree Controls Engineering, Computer Engineering or related discipline.
  • 8+ years of experience in controls engineering, automation or industrial software development, ideally with mission-critical facilities or modular equipment.
  • Strong hands-on experience with PLC programming (Allen-Bradley, Siemens or equivalent) and HMI/SCADA platforms.
  • Solid understanding of control theory, sequencing, PID loops, interlocks and safety logic.
  • Familiarity with mechanical and electrical systems found in data centers (cooling systems, switchgear, power distribution, pumps, valves, sensors).
  • Experience with industrial communication protocols (Modbus, BACnet, OPC UA, Ethernet/IP).
  • Ability to read and produce P&IDs, control narratives, wiring diagrams and network architecture documents.
  • Experience with commissioning, field testing and troubleshooting automation systems.
  • Strong communication and documentation skills.
  • Experience leading smaller teams or mentoring engineers in a controls environment.

  B.Tech/B.E. in Electrical / Electronics / Computer Science Engineering.

Apply / Know more …

Job Description. Roles and Responsibilities

• The I&C / Alspa DCS/ TGC Commissioning engineer ensures that:
• Study, review and correct logic and hardware documentation (SAMA, PFUPs, Wiring Diagrams,…)
• Implement modification using engineering tools (Controcad)
• Loop checks
• Instrumentation setting and testing (Hart, protocol, …)
• Perform elementary tests, then functional and sequence tests
• Tune and monitor both closed and open loop functions
• Coordinate with DCS for comprehensive tests
• Troubleshooting both hardware and software problems/incidents
• Fill in test sheets and ITPLs and create reports
• Inter-change with client and third parties
• Familiar with P320, and other industrial advanced control systems, PLC’s, DCSs, motor controls, etc
• Establish, develop and execute Site Acceptance Tests ( SAT)
• Participate and assist factory testing on control panels (FAT) – for TGC/DCS/Generator control panel.
• Knowledge of software and hardware of numerous PLC based Control/Monitoring systems, ABB, Allen Bradley, PC3000, etc
• Knowledge in all instruments disciplines including Digital/Analogue Electronics, pneumatics, Hydraulics,a nd process control, pressure, Temperature, Flow and level.
• Conducting tests and repairs on plant instrumentation and control systems.
• Provide technical supports for process commissioning engineer
• Complete I/O Checks, instrument configuration and required documentation for project
• Investigate and trouble shoot electrical control issues with the commissioning team
• Participate in Hazop Studies, and providing support in the instrumentation for procurement and construction activities.
• Commission and trouble shoot conventional IO, Hart and fieldbus Instruments loops.
• Develop instrument indexes and IO Point assignments.
• The personnel assigned to him/her are fully acquainted with the site specific rules, safety regulations and environmental protection measures and that they perform their work accordingly.
• All activities not identified in the standard or specific commissioning procedures are carried out under PTW, according the site regulations.
• A performance feedback of all employees assigned to him/her is made to the COMM
• Commissioning is performed in a safe and timely manner.
• Prepare for commissioning as specified in the work instructions.
• Developing commissioning plans, testing procedures, protocols, and reports
• Facilitate the turnover of systems from erection to commissioning and from commissioning to the customer in accordance with current procedure/work instruction by arrangement with the COMM.
• Ensure that the engineering department is involved in handling technical problems and decisions by arrangement with the COMM.
• Ensure the commissioning, operation, quality record and feedback documentation are issued.
• Hand over the commissioning, quality and feedback documentation and software (originals) with a document list to the COMM for compiling and release.
• Ensure that technical deviations are reported with a corresponding non-conformance report (NCR) and that the same are followed up until their completion.
• Keep a diary to record daily work, occurrences, problems, special information, etc. plus a list of pending items.
• Maintain logbooks to record commissioning and operational events as specified in the work instructions by arrangement with the COMM.
• Advise the COMM of any information that could influence the commissioning time schedule and/or the commissioning staff planning.
• Manage, assess, supervise and co-ordinate personnel assigned to him/her, ensure his compliance with the EHS rules deployed on site.
• Manage the handling and inspection of the commissioning test equipment.
• Support and train other ComE’s assigned to him/her.
• Participate in site meetings by arrangement with the COMM.
• Train the customer staff in operation and maintenance as instructed by the COMM.
• Check the time sheets of the personnel assigned to him/her and forward the same to the COMM.
• Work off the open item lists of systems under his/her responsibility by arrangement with the COMM.
• Organise the return of all commissioning test equipment as soon as possible by arrangement with the COMM.
• Provide information to the COMM for reporting purposes.
• Provide, by assignment completion, a Field Service Report and forward the same to the COMM.
• Provide, on request, technical experience feedback to project engineering departments during debriefing meeting(s) to be organized by the project.

Required Qualifications

• Bachelor’s degree in electrical & Instrumentation or equivalent
• Minimum 5-6 years’ Experience
• Nice to have Experience of 2-3 years on PLC/DCS Commissioning

Apply / Know more …

Job Description. Roles and Responsibilities

• Work under the mentorship and guidance of a Lead Instrumentation Engineer.
• Development a variety of I&C design documents such as design drawings, technical specifications, design basis, calculations, instrument selection, procurement support with a high level of competence and minimal oversight.
• Work efficiently to assure that project schedules and budgets are met.
• Work independently and collaborate in cross-discipline team to meet project goals.
• Compliance with North American Codes and Standards, governing regulations, industry practices, and internal procedures.
• Develop and perform quality reviews for detailed and design documents.
• Review of instrument and control systems vendor drawings and interface with suppliers, clients, other engineering disciplines, detailers/designers.
• Participate in the development and design review of piping and instrumentation diagrams (P&IDs).
• Prepare and review control deliverables such as Control Narratives, Cause and Effect diagrams, System Architecture Diagrams, Instrument Location Layouts, Installation Details, Wiring & Interconnection Diagrams, PLC Layouts, and Loop Drawings.
• Prepare I&C lists such as equipment list, IO list, I/O assignment, Instrument Index, Serial Interface list, cable list, etc.
• Perform instrument sizing calculations and selection.
• Developing and reviewing Instrumentation Datasheets for instruments and valves.
• Provide configuration of and programming of controls equipment, including PLCs, HMIs, DCS Systems, etc.
• Participate in client and project review meetings.
• Prepare technical bid evaluation and attend FAT.
• Collaboration with project management/engineering discipline to develop project budgets, schedule, prepare scoping documents, design criteria and list of project deliverables.
• Promote engineering professionalism and maintain positive relationships internally and externally.

Qualifications

• Bachelor of Science in Electrical Engineering (or related field).
• 10+ years of relevant experience.
• Working knowledge of Instrumentation and Controls Engineering is essential.
• Basic knowledge of applicable design standards governing corresponding design work, such as API, NFPA, ISA, PIP, IEC, IEEE, ISO, NACE, NESC.
• Strong written and verbal communication skills and the ability to collaborate with the team.
• Excellent computer skills such as MS Word, Excel and Projects.
• Maintain and update personal knowledge of current industry trends and technology.
• Demonstrate advanced ability to work with others in supplying information and seeking assistance as necessary.
• Must pass a background check.
• Working hours will be 3:30 p.m. to 12:30 a.m. IST.

Preferred Qualifications:

• AutoCAD, Revit, or SPI, Plant 3D and other design program competence.
• Fisher specification manager, Allen-Bradley RS logix 500, architecture builders.
• Experience with Rockwell, Siemens, Schneider, Emerson, E+H.
• Experience with mining, oil and gas, water treatment, and EPCM projects.

Apply / Know more …

Job Description. Roles and Responsibilities

• • Design, develop, test, and maintain PLC programs preferably using Modicon M580, M340 controllers.
  • Program HMI interfaces to monitor and control industrial processes.
  • Implement SCADA systems for data acquisition and processing.
  • Collaborate with cross-functional teams for engineering, installation and commissioning.
  • Proficiency in working on HMI (Vijeo Designer) & SCADA (Aveva Plant SCADA, Aveva System platform, GeoSCADA, EcoStruxure Process Expert) systems.
  • Develop technical competency within team by sharing knowledge & guiding junior team members.
  • Exposure of working in Oil & Gas, Water & Wastewater, Infrastructure (Metro, Building) projects.
  • Knowledge in ERP, MES and IoT will be an added advantage.
  • Hands on with database management tools like SQL server, Microsoft Access etc. is preferred.
  • Skills: Networking, Panel Design, Customer handling, Cross function-collaboration, Analytical Thinking, Programming, Scripting.

  B.Tech/B.E. in Electrical / Electronics / Computer Science Engineering.

Apply / Know more …

Job Description. Roles and Responsibilities

• • Design, develop, test, and maintain PLC programs preferably using Modicon M580, M340 controllers.
  • Program HMI interfaces to monitor and control industrial processes.
  • Implement SCADA systems for data acquisition and processing.
  • Collaborate with cross-functional teams for engineering, installation and commissioning.
  • Proficiency in working on HMI (Vijeo Designer) & SCADA (Aveva Plant SCADA, Aveva System platform, GeoSCADA, EcoStruxure Process Expert) systems.
  • Develop technical competency within team by sharing knowledge & guiding junior team members.
  • Exposure of working in Oil & Gas, Water & Wastewater, Infrastructure (Metro, Building) projects.
  • Knowledge in ERP, MES and IoT will be an added advantage.
  • Hands on with database management tools like SQL server, Microsoft Access etc. is preferred.
  • Skills: Networking, Panel Design, Customer handling, Cross function-collaboration, Analytical Thinking, Programming, Scripting.

  B.Tech/B.E. in Electrical / Electronics / Computer Science Engineering.

Apply / Know more …

Job Description. Roles and Responsibilities

• As our OT Security Consultant you’ll play a key role in supporting Danfoss’ transition to Smart Manufacturing. Your expertise will help secure smart manufacturing solutions and protect operational technology environments, ensuring resilience and trust across global operations

  What You’ll Be Doing
  

  • Help facilitate information security activities across the company to continuously improve its security posture.
  • Contribute to initiatives and activities to improve security of the OT environment, and to information security in general.
  • Build the bridge between the business segments and Danfoss Group Digital & IT to ensure complex interrelationships are understood and tangible actions are performed.
  • Collaborate with both internal colleagues and external vendors to guide and support securing new and existing solutions.

  What We’re Looking For
  

  • Knowledge and experience of implementing OT/IT security standards and frameworks (e.g. ISA – ISA99/IEC62443, ISO27001, NIST SP 800-82 etc.)
  • Understanding of OT architecture, systems and network communication, as well as automation protocols such as Modbus, Profibus etc.
  • Minimum 3 years of relevant professional experience in an OT security or similar role.
  • Strong written and verbal communication in English.
  • Collaboration skills.
  • Training and certification by an accredited body such as ISC2, SANS/GIAC, or ISA are considered an advantage.

  What You’ll Get From Us
  

  • We promote from within and support your learning with mentoring, training and access to global opportunities.
  • You’ll have flexibility, autonomy, and support to do your best work while maintaining a healthy work-life balance. Your well-being matters to us.
  • We strive to create an inclusive work environment where people of allbackgrounds are respected, and valued for who they are.
  • You’ll receive benefits like 13th salary, annual bonus, paid vacation, pension plans, personal insurance, and more. These vary by country and contract, but they’re worth asking about—we think they’re pretty great.

Apply / Know more …