Career

Job Description

As a Senior Control Automation Engineer, you will be working across two engineering disciplines. Solution and engineering centre (NPI, ITO, OTR and Product Care) in all aspects of HVDC Control & Protection system, this includes developing organizational talent and Engineering process management, provide technical guidance, mentoring, drive consistent design practices, common global processes for projects implementation and also provide technical solution that meets the NPI , project delivery and Tender objectives.

This role is responsible to lead the requirement, design, implementation, and development of digital control system of the HVDC Control & Protection system.

Job Description Roles and Responsibilities Overseeing the overall technical solution that meets customer Requirement based on reference Solution.

This Includes The Following Actives

• Requirement & Design
• Overall Control System Architecture & communication networks Architecture
• IEC 61850 Implementation, system integration and system deployment
• Overall System Level Cybersecurity
• Overall Network design of the control & Protection System
• Customer interface and training
  • Responsible for leading overall requirement, design, implementation, and development of digital control system of the HVDC Control & Protection system this includes network & Cybersecurity design
  • Be the owner of all aspects of HVDC IEC 61850 Implementation and system deployment, system Configuration, and validation, as well as all usual integration challenges of the control & protection system
  • Implement and maintain the control & protection system reference and customer solutions
  • Execute and provide guidance for the analysis / evaluation of assigned projects that meet business standards, practices and procedures and the product / program requirements
  • Responsible for coaching and developing department talent.
  • Uses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations.
  • Continuously improving the product in terms of delivery speed, stability and reliability
  • Ensure security and compliance standards are taken into consideration into the design decisions
  • Review and approve design documents, implement, and ensures quality deliverables on time and within targeted cost

Required Qualifications

• Degree in Electronics/Electrical engineering or related field.
• Strong background in configuring Substation Bay Controllers/Merging Units/ IEC61850 IED’s
• Minimum of 15 years’ experience in control and protection system design
• Knowledge of industrial communication networks such as IEC61850 and Ethernet based protocols.
• Control & Protection Relay logics Design techniques
• Experienced in developing electrical designs for industrial control systems
• Knowledge of communication networks Security/Hardening and Cybersecurity best practices
• Excellent knowledge of commonly used Layer2&3 protocols such as Ipv4, OSPF, LACP, DMZ, VPN/ DMS/ADMS/ DNP, IEC, Modbus
• Experience relevant to electrical power systems and Substation automation engineering
• Working knowledge of industrial and utility electrical control and protection systems and Digital Control Systems, Substation Automation and SCADA

Desired Characteristics

• Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Ability to document, plan, market, and execute programs. Established project management skills.
• Proven technical leadership in a complex system engineering development environment
• Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in experts when needed
• Demonstrates track record of designing quality systems/components that exceed design reqs, beat cost targets, and exceed reliability targets

Job Description

In This Role, Your Responsibilities Will Be:

• End to End project design & engineering
• Implement Greenfield Power & Water as well as Lump Sum Turn Key (LSTK) projects efficiently
• Should have adequate experience in Hardware Engineering, Panel design, Understanding the Network Architecture, Exposure to Buyouts
• Understanding of buyouts such as (HMI, Servers, Cables, Control desk/furniture, Field Instruments, Relays, Barriers, HMI, UPS, Chargers, LVS etc.).
• Knowledge about Site walk-downs for data collection, IO list preparation.
• Experience in preparation of cable schedule, engineering documentation, technical quotations and business/customer correspondence.
• Understanding of the project cycle, time management and production phases.
• Awareness of technical risk during project execution and site activities.
• Experience in Pre-FAT and Conducting customer FAT (HW & SW) and SAT.
• Exposure to the support Procurement team and creating procurement requisition.
• Working with contractors / subcontractors and Vendors.
• Verification and functional testing of I/O interfaces to field devices and Supervision of control system installation, commissioning and start-up.
• Good communication skills both written and verbal for working in close collaboration and with global stakeholders.

Who You Are: You display a can-do attitude in good and bad times. You recognize when a solution can be balanced. You focus and monitor both formal and informal progress regularly. You provide calmness and efficiency, even when things are unclear. You convert ideas into actions and produce results with new initiatives.

For This Role, You Will Need:

• Bachelor’s degree in engineering (Electronics & Communication, Instrumentation & Control, or equivalent field)
• 7+ years’ project engineering experience in the field of DCS / PLCs and exposure to commissioning. With 4+years with Emerson
• Hardware design exposure, Procurement exposure.
• Control design, implementation, process testing for Power and related process Treatment plants.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form.
• Proficiency with ISA and SAMA logic symbols, Process & Instrumentation Diagrams (P&IDs), electrical, mechanical, and hydraulic schematics

Preferred Qualifications That Set You Apart:

• Excellent written and verbal communication skills
• Problem-solving, decision-making, and planning skills
• Ability to write reports, business correspondence and commission documents
• Ability to optimally present information and respond to queries from management, clients, and customers.
• Proficiency with one or more DCS/PLC platforms (e.g., ABB Pro Control / Bailey INFI 90 / Symphony Harmony, Yokogawa Centum VP / CS3000, Siemens T3000 / TXP, GE Mark V / VI, Mitsubishi DIASYS Netmation, Invensys, Honeywell TDC3000, MaxDNA, Metso DNA, Alstom Alspa 320, Allen Bradley / GE-Fanuc / Schneider / Siemens PLCs & SCADA etc.)
• Knowledge of datalinks (Modbus RTU / TCP-IP, ELC, Fieldbus, Profibus, OPC, etc)

Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives – because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results.

We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family’s physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave

About Us WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration.

We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world’s most complex problems — for our customers, our communities, and the planet. You’ll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor.
At Emerson, you’ll see firsthand that our people are at the center of everything we do. So, let’s go. Let’s think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let’s go, together.

Job Description

In This Role, Your Responsibilities Will Be:

• • Performs assignments that will develop professional work knowledge and abilities through the application of standard engineering techniques, procedures and criteria. Exercises limited but increasing judgment in performing assigned tasks. Using prescribed methods, performs specific and limited portions of a broader assignment of an experienced engineer.Job DimensionsSupervision Received
    • Receives technical and administrative supervision from Engineering Group Supervisor

    Supervision Exercised

     

    • Provide technical direction to ICSS Team members who develop 10 assignments, 10 Configuration, Implementation of Logics and Graphics and test the integrated system.

    Contacts

     

    • Maintains contact with the immediate work group or discipline and interfaces with other disciplines as specifically directed.

    Major Responsibilities

     

    • Preparation of Design Criteria for Controls and Instrumentation.
    • Development of Detailed design specifications for ICSS (DCS / SIS / FGS) and HMI / SCADA.
    • Preparation of Functional Safety Management Plan (FSMP) and Safety Requirement Specification (SRS). (Preferred)
    • Preparation of Complex Loop Control Narratives, Cause and Effect Matrix/Diagrams for Process and F&G Systems, Logic narratives.
    • Development of 1/0 data base for DCS, SIS, FGS and Mechanical Vendor Packages.
    • Preparation of Material Requisition for ICSS; Review of the various technical bids, initiate and resolve Technical queries with bidders and prepare Technical Bid Evaluation (TBE). Assist procurement team in finalizing the commercial bid evaluation and purchase order.
    • ICSS Supplier documents review
    • Preparation of Logic Typical/ control modules and testing for DCS, SIS and Fire and Gas System.
    • Customary Logic Development in DCS, SIS and Fire and Gas System.
    • Experience in populating ICSS Database using Supplier Bulk Loading Software from Instrument Index export.
    • Experience in developing typical software library based on Loop typical derived from P&IDs and Instrument Index.
    • Preparation of 10 List, 10 Allocation for customary / Remote 10 systems and details of cross-wiring between cabinets.
    • Design of Marshalling and System Cabinets.
    • Preparation of FAT / SAT procedures for ICSS (DCS / SIS / FGS) and test procedures for vendor PLCs offered by various package vendors.
    • Coordinate with the ICSS suppliers for all activities relative to Site Acceptance Testin (SAT) and Site Integration Test (SIT) of ICSS.
    • Assist and coordinate troubleshooting between instrumentation, ICSS, ECMS, and 3rd Party systems.
    • P&ID reviews and mark-ups for correct depiction of complex loops.
    • Application of Alarm Management in process industries with knowledge of ISA 18.2.
    • Development of ICSS network block diagram and System architecture.
    • Grouping & development of simple and complex HMI graphics based on PFDs, P&IDs and vendor documents for a DCS System.
    • Configuration Knowledge of Instrument Asset Management System (IAMS), Plant Historian (Preferred).
    • Develop Software and Hardware FAT plans and perform FAT with customer.
    • Develop/Review System Architecture for entire ICSS.
    • Support Project Manager for all technical aspects of project as well as support in various project activities such as scope review, kick off meeting, resource planning, engineering planning, procurement support, quality control, customer handling, risk monitoring control, progress report and closeout.
    • Analyze customer inputs and comprehend requirements such as Design Specifications, PIDs, Control Narratives, 10 List, Instrument Index, Operating Philosophies etc. and Raise Technical Queries when required.
    • Coordinate assigned work with other disciplines/ technical personnel as directed.
    • Participates in and fosters a work environment that is based upon forthrightness, trust, communication, teamwork, empowerment, innovation, and satisfaction.

    Education And Experience Requirements

     

    • B.Tech in Instrumentation & Control from a recognized university.
    • Level 1: 12 – 16 years of industry experience.
    • Level 2: 16+ years of industry experience.

    Preferred Qualifications

     

    • Engineering and Design experience in EPC and/or FEED Projects.
    • TUV/Exida Certified Functional Safety Professional and Certified Cybersecurity Professional.

    Required Knowledge And Skills

     

    • Thorough technical knowledge of Control Systems engineering.
    • Thorough knowledge of discipline engineering techniques, the design of engineered systems, and engineering and design calculations.
    • Comprehend industry regulatory codes and standards and design criteria pertinent to the particular engineering discipline.
    • Comprehend the standard engineering work planning, scheduling and cost estimating.
    • Job knowledge of various types of field Instrumentation, DCS, PLC, Hazardous areas is essential.
    • Design experience and working knowledge of DCS /SIS/ PLC and SCADA Networks, Fiber optic and CAT 6 is essential.
    • Basic awareness industry standards Application Programs such as SPI.
    • Good knowledge of MODBUS TCP/IP and RTU communication protocols.
    • TUV/EXIDA Functional Safety Engineer certification or experience in a functional safety role would be advantageous.
    • Strong oral and written communication skills.
    • Basic knowledge of Virtualization products like VMware, Hyper-V.
    • Preferred knowledge and working experience on the following systems:
    • Honeywell- Experion / Safety Manager
    • Yokogawa- Centum VP / Prosafe RS
    • Emerson- Delta V / Delta V SIS
    • Allen Bradley- Control Logix
    • Schneider – Triconex / Foxboro
    • Knowledge on performing Integrated testing between Software and Hardware.
    • Experience in handling FAT and SAT and change management.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • Support operations and maintenance activities through the development and execution of centralized engineering services for existing upstream and downstream business units/manufacturing facilities globally, provide technical expertise on all engineering subject matter pertaining design in discipline area and to Ensure design and engineering compliance with relevant codes, standards, and Company Standards. The candidate would be part in ExxonMobil Services and Technology Private Limited, Whitefield, Bengaluru in India.What You Will Do
    
    • Provide troubleshooting and reliability improvements for upstream, midstream and downstream business units manufacturing facilities to maintain safety, availability, and reliability of instrumentation systems while optimizing cost.
    • Develop and execute instrument surveillance programs.
    • Collect data using computer maintenance management systems (CMMS) or other available data sources.
    • Analyze maintenance records to determine instrument failure rates, availability / reliability calculations, bad actor / failure modes identification, and program effectiveness / cost analysis.
    • Integrate maintenance and process data into holistic understanding of instrument/process control performance.
    • Utilize risk-based work selection techniques to identify and justify maintenance/improvement items for inclusion in annual and periodic maintenance plans and events.
    • Coordinate, Monitor and handle discipline design and engineering with EPC Contractor as per project
    • expectation and complete the same within the time frame.
    • Review and approval of EPC Contractor’s work and ensure compliance with Project Specifications, relevant codes and standards and best industry practices in compliance with the contractual review periods.
    • Guide less experienced engineers on standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
    • Participate in the development and maintenance of Global Procedures, Software, and Standards.
    • Attend I&C equipment FATs, as required.
    • Participate in HAZOP, SIL, and Classification Studies, as required.

    What You Will Do Cont…
    

    • Assist in closing out HAZOP action items
    • Provide construction, pre-commissioning, and commissioning, Turnaround (Shutdown) Support as required.
    • Develop equipment strategies/maintenance plans for instrumentations and control systems taking into
    • consideration safety integrity level (SIL) assessment, Verification industry standards, regulatory requirement, and manufacturer recommendations. Support on Functional Safety assessment / Management studies.
    • Review, update, and develop I&C technical documentation / drawings including piping and instrumentation diagrams (P&IDs), cause and effect, and control narratives.
    • Execute control system and safety instrumented system (SIS)/ programmable logic controller (PLC) life cycle management programs which include system inventory, obsolescence plans, managing spare parts and upgrade/replacement planning.
    • Support control system and safety instrumented system (SIS)/ programmable logic controller (PLC)
    • Maintenance and test planning as required, software upgrades, emergency shutdown (ESD) testing, offline and online testing, and coordination of activities with/without plant shutdowns.
    • Create and Support Management of Change (MoC) activities for I&C scope.
    • Basic understanding of Cybersecurity Requirement for Control System as per Industry standards

    About You
    Skills and Qualifications
    

    • Bachelor of Engineering Degree from recognized university in Instrumentation and Controls, Electrical/Electronics.
    • Minimum 3 years of experience in application of instrumentation and controls engineering in oil and gas, Refining or Petrochemical industry for projects or operations.
    • Minimum 3 years’ experience in selection, sizing and application of pressure/temperature/ flow/ level instruments, control valves, shutdown valves, etc.
    • Familiarity with Industry standards, Country-specific regulations (CSR), and local codes.
    • Should have work permit to work in India.
    • Familiarity of Cybersecurity and Functional Safety in Process Industry as per Industry standards.

    Preferred Knowledge, Skills & Abilities
    

    • Demonstrated experience in selection, application, and data sheet specification of field hardware including pressure/temperature/ flow/ level instruments, control valves, shutdown valves, etc.
    • Experience in preparing specifications, selection, applications, configuration/programming of Safety Instrument Systems.
    • Understanding of the impact of equipment sparing, redundancy, reliability, availability, maintainability, and maintenance cost in support of Operations Excellence and Capital efficiency
    • Working knowledge of complex instrument systems, such as machinery control systems, vibration monitoring systems, custody transfer metering, fired heater burner management, Tank gauging system etc.
    • Able to review, evaluate, and update cause and effect, piping and instrumentation diagrams (P&IDs), logic and architecture diagrams and control narratives.
    • Proficient in data collection and analysis with common database and software data analysis tools such as SAP, Analytics for excel and tableau.
    • Certification in Functional Safety from recognized institution
    • Certification in Cybersecurity as per industry standard from recognized institution
    • Strong verbal and written communication skills in English.

    Your Benefits
    An ExxonMobil career is one designed to last. Our commitment to you runs deep: our employees grow personally and professionally, with benefits built on our core categories of health, security, finance and life. We offer you:

    • Competitive compensation
    • Medical plans, maternity leave and benefits, life, accidental death and dismemberment benefits
    • Retirement benefits
    • Global networking & cross-functional opportunities
    • Annual vacations & holidays
    • Day care assistance program
    • Training and development program
    • Tuition assistance program
    • Workplace flexibility policy
    • Relocation program
    • Transportation facility

    Please note benefits may change from time to time without notice, subject to applicable laws. The benefits programs are based on the Company’s eligibility guidelines.
    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • Start your Jacobs career with a company that inspires and empowers you to deliver your best work so you can evolve, grow and succeed – today and into tomorrow.About The Opportunity
    • Clear knowledge of work procedures, and ability to work independently.
    • Delivering Drawings to desired quality standards and according to mutually agreed timelines with the client.
    • Able to communicate in confidence with client or foreign counterpart.
    • Working in team to deliver projects on time.
    • Attending meetings with technical leads.
    • Shall be able to independently handle I & C work in projects.
    • Shall be able to design and implement SCADA systems, including DCS, PLCs, and HMIs, for municipal water/wastewater projects.
    • Shall be able to control system design recommendations, programming, schematic design, and troubleshooting to ensure high system availability.
    • Shall be well versed instrument selection criteria.
    • SCADA system design and implementation experience in process control systems, P&ID development, control system network architecture development, instrumentation and controls design, control strategy development, and network security systems
    • Experience with SCADA system commissioning, including troubleshooting and problem-solving techniques to maintain high SCADA system availability.
    • Working knowledge of PLC and HMI programming functionality and execution
    • Preparation of design basis, space planning for control rooms
    • Shall have knowledge all I & C related deliverables and drawings.

    Here’s what you’ll need

    About You

     

    • BE/B Tech/ME/M Tech Electrical with 7 years and above experience.
    • Specific experience in municipal water/wastewater projects and a solid understanding of control systems engineering.
    • Ability to carry out inter- disciplinary coordination.
    • Resolve any design issues & coordinate effectively with leads
    • Plan, schedule, conduct, and communicate work with team members all design aspects of the project.
    • Attend client meetings for technical clarifications.
    • Capable of working under challenging workload subject to change at short notice.
    • Good communication & IT skills.
    • Clear knowledge of work procedures, and ability to work independently.
    • Delivering Drawings to desired quality standards and according to mutually agreed timelines with the client
    • Able to communicate confidently with client or foreign counterpart.
    • Working in team to deliver projects on time.
    • Software Skills
      • PLC/SCADA Software
      • Blue beam Revu
      • Proficiency with Microsoft Office Suite

    At Jacobs we value people. Having the right balance of belonging, career and lifestyle enables us to consistently deliver and exceed clients’ expectations.

    Working alongside industry leaders, you will have the opportunity to develop your career working on key projects in an environment which encourages collaboration, knowledge sharing and innovation. To support your professional growth, Jacobs flexible working arrangements, extended leave options and a host of social, health and wellbeing events and initiatives will underpin our commitment to you.

    At Jacobs it’s all about what you do, not where you are, which counts!

    We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery. We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work.

    Your application experience is important to us, and we’re keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support.
    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • BE or BTech in Electronics /Instrumentation/Electrical Engineering.Skills and Competency :a) Basic Technical Knowledge in DCS/PLC/Scada/Instrumentation.b) Good communication skills,d) Self motivated and self learning.Yokogawa is an Equal Opportunity Employer. Yokogawa wants a diverse, equitable and inclusive culture. We will actively recruit, develop, and promote people from a variety of backgrounds who differ in terms of experience, knowledge, thinking styles, perspective, cultural background, and socioeconomic status. We will not discriminate based on race, skin color, age, sex, gender identity and expression, sexual orientation, religion, belief, political opinion, nationality, ethnicity, place of origin, disability, family relations or any other circumstances. Yokogawa values differences and enables everyone to belong, contribute, succeed, and demonstrate their full potential.
    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • In this role, you will have the opportunity to act as commissioning lead for high complex projects. Each day, you will ensure completion of all commissioning activities effectively and cost-efficiently and in accordance with contract specifications, quality standards, safety requirements, and cybersecurity policies and standards. You will also showcase your expertise by providing technical solutions to meet current and emerging business and customer requirements.The work model for the role is:This role is contributing to the Robotics & Discrete Automation in Bangalore & Pune, India.You will be mainly accountable for:
    • Design, develop, and customize PLC programs using Ladder Logic, Structured Text, and other IEC 61131-3 languages for various machinery and production lines.
    • Integrate PLCs with sensors, actuators, HMIs, SCADA systems, and ensure seamless communication using industrial protocols like Modbus, Profibus, and Ethernet/IP.
    • Perform on-site commissioning, testing, troubleshooting, and maintenance of PLC-controlled systems; travel up to 80% across India based on project requirements.
    • Prepare and maintain technical documentation including wiring diagrams, program logic, user manuals, and operating guides using MS Office tools.
    • Collaborate with cross-functional teams and ensure compliance with safety standards while coordinating with vendors and customers for timely support and delivery.

    Qualifications For The Role

     

    • Diploma or Bachelor’s degree in Mechanical or Production Engineering
    • 6–12 years of experience in Bodyshop/Chassis shop installation and commissioning, preferably in automotive or automation industries
    • Strong expertise in handling Spot-Welding jigs, Arc welding fixtures, Roller hemming fixtures, with sound knowledge of BIW processes
    • Proficient in PLC programming using Ladder Logic, Structured Text, and Function Block Diagram (FBD)
    • Hands-on experience with PLC platforms such as Siemens (TIA Portal, Step 7), Allen-Bradley (RSLogix, Studio 5000), and Mitsubishi
    • Skilled in HMI/SCADA development using tools like Wonderware, WinCC, and Ignition
    • Familiarity with industrial communication protocols including Modbus, Profibus, Ethernet/IP, OPC UA, and CANopen
    • Strong electrical knowledge including reading schematics and working with sensors, actuators, relays, and motor controls

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • Develop solutions to replace obsolete equipment/parts to able to maintain the business’ fleet of industrial steam Turbines.
    • Write complex Governing & Protection software modules from philosophy document’s or convert obsolete control system into software driven system.
    • Deliver Controls Applications Software Service Modification & Upgrade Projects based on current industrial Steam Turbine Operating Philosophy
    • To be able to design/construct new hardware solutions to replace obsolete controls system or upgrade current control systems.
    • To convert these solutions into generic replacement kits/parts for retrofitting
    • Support the Installation & Commissioning Team when required to Identify and rectify problems found during installation and commissioning of equipment/software solutions supplied.
    • Support the Engineering sales and tender to supply detailed quotes with regards to engineering times/potential hardware requirements/possible engineering solutions with regards to customer enquires
    • The post will also support the existing Controls Engineering Teams in the design and development of Control Systems for Steam Turbine Equipment as supported by Siemens Energy Services
    • Prepare (FAT & SAT) Factory & Site Acceptance Test procedures for protection systems projects.
    • Be a technical leader in projects or lead other team members in project activities.
    • Be one of our primary customer interfaces, including trouble shooting and commissioning support.
    • Provide technical support throughout the project lifecycle, including design, implementation, and commissioning phases.
    • You’ll win us over by having the following qualifications:
    • Basic Qualifications:
    • A bachelor’s degree in Electronic/Instrumentation engineering or relevant field.
    • 10+ years of experience in Control system design in the Control Engineering Field.
    • Proven experience working with Engineering Base (EB) Software and the Global Engineering Library (GEL) database for design.
    • Knowledge of Siemens Step7, WinCC, TIA Portal, PCS7 and T3000 automation products and associated software.
    • Communication Network Technologies, including Design and hardware configuration.
    • Communication protocols such as IEC61850 (MMS/GOOSE/SMV), DNP, Modbus, IEC103, IEC101, IEC104, Profinet, Profibus.
    • Control and Protection commissioning experience.
    • Knowledge of ANSI standards, IEC standards.
    • Around 45% of travel is expected depending on project assignments and requirements.
    • Preferred Qualifications:
    • Project Lead experience.
    • Advanced Knowledge of Microsoft Visio tools.
    • Advanced Knowledge of Microsoft Office.
    • Experience working with AutoCAD/AutoCAD Electrical.

    We don’t need superheroes, just super minds.

     

    • A degree or equivalent experience / professionally accredited or recognized in an engineering subject area preferably relating to the fields of Controls, Electrical, Electronics, Instrumentation, and Software.
    • Working experience with industrial controls systems applications and industrial IT networks, specific experience with Siemens S7, Siemens S7 TIA, PCS7, WinCC, T3000 or having worked with similar products used for the control and protection of industrial steam turbine technology or general process plant operations.
    • Working knowledge of change/configuration management tools and processes, as well as experience with other IT related tools and software for business analytics and project management.
    • Experience with working with P&ID’s and ISA/ANSI standards.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • Lead Instrumentation & Control Engineer leads the team of instrumentation & control engineers and designers and independently define, plan and manage the issuance of instrumentation & control deliverables and execute the project instrumentation & control engineering activities in accordance with project specifications, schedule, cost and quality, mainly for Topside facilities in FPSO/FLNG or Offshore facilities.Lead Instrument Engineer develops corporate technical standards/procedures, workflow, engineering platform (e.g. Instrument design data integration) and keep them updated, integral, practical and fit to purpose with incorporating Project Lesson Learns.Lead Instrumentation & Control Engineer assists Head of Discipline for managing a corporate organization and mentors Instrument Engineers in the Discipline.Lead Instrument Engineer conducts technical validation and quality assurance (input/output data accuracy, technical appropriateness, consistency, practicality, code, optimum solution and regulatory compliance) in executing Feasibility /Conceptual Study/Pre-FEED/FEED, EPCI Engineering for FPSO/FLNG or Offshore facilities projects.This role may require frequent travel to the US, Europe, and Asia.The strategic focus will also include providing support to Hanwha Ocean engineering teams based in USA/Netherland/Singapore/India and elsewhere as necessary including Conceptual, pre-FEED and FEED for projects in the offshore area in the future.Key Responsibilities
      • Assist Topside Instrument Head of Discipline / Principal Engineer to manage corporate organization
      • Update and Maintain EPCI and O & M Phase Lesson Learnt database
      • Ensure all engineering documents are prepared and developed in accordance with relevant design code, standard and client’s project specification.
      • Provide engineering review and support for bid proposal including estimate of manhour and cost.
      • Raise Technical Queries towards the client’s project documents, Design basis to ensure all scopes of work and design basis are clarified.
      • Attend project meetings internally and externally (with clients, third party, sub-contractor) and generate MOM
      • Manage interface with all relevant disciplines to get necessary information for Instrumentation & control engineering or to provide data to other disciplines for their engineering
      • Mentor junior or less-experienced Instrument engineers
      • Report Area of Concerns, Progress and Plan to Head of Discipline
      • Ensure Compliance with regulatory requirements
      • Develop Project Design Philosophies, Standards, Procedure
      • Working in Engineering Software – SPI , AVEVA Instrument, Instru Cal
      • Conduct feasibility studies, Pre-FEED, FEED, FEED Verification (Inception of EPCI Phase) and EPCI phase Engineering
      • Develop Instrument calculations, studies and deliverables
      • Close out comment/punches/recommendation from HAZOP, Vendor HAZOP, HAZID, SIL, 3D Model, Constructability Review and etc.
      • Review and approve Vendor Documents, Instrument Deliverables and inter discipline documents
      • Provide engineering support for construction, commissioning and operation team
      • Ensure issuance of as-built Instrument deliverables

      Qualifications

       

      • Minimum bachelor’s degree in Instrument/ Electronics & communication or equivalent Engineering
      • Minimum 15 years’ experience with 10 years’ experience at FPSO contractor or Offshore/Onshore EPC contractor
      • -Minimum 1 FPSO / FLNG / Offshore FEED/EPCI Project experience
      • leadership skills with ability to manage multiple priorities
      • -Skill to plan, schedule, organize resource and supervision of design and engineering tasks for teams
      • Working experience in Engineering Software – SPI , AVEVA Instrument, Instru- Cal
      • Ability to work effectively independently and as part of a multidisciplinary team, with strong attention to detail and accuracy. ability to manage multiple priorities
      • Ability to work with and to communicate effectively with co-workers, vendors, clients and manage multiple priorities.
      • Fluent in English, with strong oral and written communication skills

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • Security Architecture Development: Design security architecture for Manufacturing IT and OT connectivity aligned with policies and best practices; define authorization concept (need-to-know, least privilege); lead secure IT/OT connectivity for real-time data; advise Asset Owners on access control (RBAC), roles, privileges, and account management.
      • Security Architecture for central provided Manufacturing IT systems: Architect security standards for MES and IIoT (scalable integration, secure data, centralized monitoring); support Valus Center programs MES@SE and MIT; define plant and BA-specific architecture blueprints.
      • Machine Connectivity and IIoT Integration: Design secure connectivity for Manufacturing IT, OT, and IIoT; define and implement communication standards and protocols (OPC UA, MQTT) for secure, efficient data exchange.
      • Consult Business Area and plant specific initiatives: Collaborate with sites to strengthen machine-to-network security; consult on secure IIoT deployments and automation; support predictive maintenance, process optimization, and energy efficiency aligned with corporate policies.
      • Data Protection and Privacy: Implement data protection for sensitive product data across its lifecycle; ensure compliance with data privacy regulations in Manufacturing IT and data handling.
      • Operational Security: Document operating procedures (architecture, responsibilities, change management, incident response); apply the four-eyes principle; develop incident response plans; conduct risk assessments, threat modeling, and mitigation controls.
      • Compliance and Documentation: Ensure compliance with security standards and regulations; document all security processes and changes; collaborate with Asset Owners and Asset Managers on operational requirements and approvals.

      What You Bring

       

      • A bachelor’s degree in Computer Science, Information Technology, or a related field; a master’s degree is preferred.
      • 7+ years in IT security, including 3+ years focused on Manufacturing IT security architecture and access control.
      • Deep knowledge of Manufacturing IT security architecture, RBAC, identity management, and connectivity protocols (e.g., OPC UA, MQTT), with hands‑on work in MES/IIoT.
      • Proven ability to conduct risk assessments and threat modeling, manage security incidents, and apply application security practices (OWASP, input validation, separation of data and code).
      • Familiarity with ISO 27001, NIST, and Segregation of Duties (SoD); strong analytical, collaborative communication skills; and scripting to automate security tasks.
      • Ability to conduct risk assessments specific to Manufacturing IT environments.
      • Familiarity with Manufacturing IT security best practices and compliance requirements (e.g., ISO 27001, NIST).
      • Skills in identifying and mitigating vulnerabilities in Manufacturing IT systems.
      • Skills in identifying, responding to, and managing security incidents within Manufacturing IT environments.
      • Knowledge of Application Security: known weaknesses (CWEs, injection flaws), good practices (separation of data and code, input validation, encoding). See OWASP project and related content.
      • Must have Certified Information Systems Security Professional (CISSP) or equivalent certifications.
      • Certified Information Security Manager (CISM) or Certified Information Systems Auditor (CISA) are good to have.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • Technology is a global function within BHP that builds and maintains Reliable, Impactful, Safe and Efficient technology. Cybersecurity is a key part of this team that manages BHP’s internal and external attack surface, safeguarding our people, data, and business operations against evolving threats.Specialist Cybersecurity Architecture is responsible for assisting in translating enterprise cybersecurity strategy into scalable and resilient architecture patterns and frameworks. This role will assist the design, review, and governance of secure-by-design solutions across BHP’s digital platforms, cloud environments, and OT systems. The role ensures security is embedded at the architecture layer across all technology domains, enabling secure transformation, regulatory alignment, and threat resilience.In This Role, Your Key Accountabilities Will Include
        • Support in establishing and maintaining architectural standards, blueprints, and reference models to support secure digital transformation and innovation (including emerging technologies such as AI).
        • Support in governing cybersecurity architecture through active involvement in the change forums, approving changes and managing deviations and exceptions.
        • Conduct, manage and oversee technical security risk assessments for programs, platforms, and transformation initiatives, ensuring effective risk articulation and remediation.
        • Assist in embedding secure-by-design principles into technology initiatives and partner with architects to integrate cybersecurity requirements from ideation to implementation.
        • Engage and influence stakeholders across Technology, Risk, Operations, and Digital Innovation to align cyber architecture with business value.
        • Continuously assess and uplift architectural security maturity and benchmark digital trust practices against industry standards.
        • Assist in Integration of cyber architecture with enterprise architecture frameworks and support compliance with audits, regulations, and legal mandates.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • You’re good at what you do and possess the required experience to prove it. However, equally as important – you have a growth mindset; keen to drive your own personal and professional development. You are customer-focused – someone who prioritizes customer success in their work. And finally, you’re open and borderless – naturally inclusive in how you work with others.Required Skills And Experience
        • X years of experience in engineering/deploying security technologies e.g., EDR, MDR, SIEM, SOAR
        • Demonstrated experience with managing and maintaining current system security measures as well as implementing new systems
        • Experience with cloud security, cyber resiliency/incident management, Zero Trust, network/EDGE security, and emerging technologies such as IoT and AI
        • Expertise in network, host, and cloud-based security, attack techniques, analysis, and investigation
        • Deep understanding of the current cyber threat landscape, the different tactics commonly used by adversaries and how you would investigate, contain and recover against their attacks

        Preferred Skills And Experience

         

        • Bachelor’s degree in Computer Science, Cybersecurity, Information Technology, or other related fields
        • Preferred Certifications in Cyber Security: ECTHP (Certified Threat Hunting Professional) or  ECMAP (Malware Analysis Professional)
        • Experience in security monitoring and in advanced analytics (UEBA)

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • Automate SBOM generation for OT & SCADA components
      •  Perform vulnerability assessment across apps, OS, firmware, containers & industrial devices
      •  Set up & maintain vulnerability & threat-analysis tools
      •  Collaborate with developers & product teams for component intelligence
      •  Create and maintain detailed security assessment reportsWhat We’re Looking For
      •  Experience in IT/OT security & pen testing
      •  Strong knowledge of Linux/Windows, Docker & Kubernetes
      •  Understanding of industrial/ICT architectures
      •  Skills in Python, Ansible & automation
      •  Strong analytical thinking & communication skills
      •  Bachelor’s in CS/IT or related
      •  OSCP or equivalent is a plus
      • 🚀 We’re Hiring: Engineer ICS Security
        📍 Location: Chennai | 🏢 5 Days 🧠 3+ Years IT/OT SecurityJoin us to strengthen the cybersecurity of wind farm OT & SCADA systems! 🌬️🔐What You’ll Do
        ⚡ Automate SBOM generation for OT & SCADA components
        ⚡ Perform vulnerability assessment across apps, OS, firmware, containers & industrial devices
        ⚡ Set up & maintain vulnerability & threat-analysis tools
        ⚡ Collaborate with developers & product teams for component intelligence
        ⚡ Create and maintain detailed security assessment reportsWhat We’re Looking For
        ⚡ Experience in IT/OT security & pen testing
        ⚡ Strong knowledge of Linux/Windows, Docker & Kubernetes
        ⚡ Understanding of industrial/ICT architectures
        ⚡ Skills in Python, Ansible & automation
        ⚡ Strong analytical thinking & communication skills
        🎓 Bachelor’s in CS/IT or related
        🏅 OSCP or equivalent is a plus🔎 Note: One of the interview rounds will be conducted face-to-face.📩 Apply at: sachin.das@manpower.co.in

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • Works on strategic projects that ensure the efficient and effective reaction to security breaches to mitigate immediate and potential threats.
        • Uses mitigation, preparedness, response and recovery approaches to minimize business disruptions and commercial consequences.
        • Offers detailed technical support investigation and analysis response activities and evaluate the effectiveness of and improvements to existing practices.
        • Conducts regular threat and vulnerability assessments and determine deviations from acceptable configurations or policies.
        • Participates in the assessment of the level of risk and support the development of appropriate mitigation countermeasures in operational and non-operational situations.
        • Analyzes evidence to support network vulnerability mitigation.
        • Supports peers in the management and implementation of the information security management system.
        • Participates in the implementation of policies, processes and guidelines to ensure the standardization of security management throughout the organization.
        • Applies tactics, techniques, and procedures to a full range of tools and processes related to administrative, criminal, and counterintelligence gathering (e.g., in-depth case analyses, continuous monitoring, malware analysis, clear documentation).
        • Proactively searches through our critical infrastructure, systems and networks to detect and isolate advanced threats that may cause harm to our organization.
        • Use both manual approaches and automated tools to identify, analyze, and report events and support the development of countermeasures to proactively protect against these threats in the future.

        To thrive in this role, you need to have:

         

        • Strong understanding of information technology and information security
        • Solid understanding of security risks and preventative controls
        • Excellent understanding of security operational processes and controls
        • Service consulting aptitude, focusing on the business, service and sales aspects
        • Excellent verbal and written communication skills
        • Demonstrate impeccable attention to detail are able to translate internal customer requirements into solutions
        • Maintain up-to-date knowledge of security threats, countermeasures, security tools, and network technologies
        • High level of drive and ability to work under pressure
        • Ability to build and maintain cross-functional relationships with a variety of stakeholders
        • Understanding of relevant laws, regulations, and compliance frameworks affecting the technology sector.
        • Good ability to assess and manage cybersecurity risks at both organizational and project levels.
        • Good knowledge of security frameworks and standards like NIST, ISO/IEC 27001, CIS, etc.

        Academic qualifications and certifications:

         

        • Bachelor’s degree or equivalent in Information Technology or Computer Science or Engineering or related field.
        • Industry relevant certifications such as CISSP, CISM, CEH, GSEC or CompTIA Security+ essential.

        Required experience:

         

        • Seasoned demonstrable experience in the Information Technology Security Industry or relevant experience in similar role within a related environment.
        • Seasoned experience with security architecture design principles.
        • Seasoned experience with industry compliance and standards such as ISO 27000, PCI DSS, NIST, HIPAA or others.
        • Seasoned experience with security tools and techniques to cover SANS Top 25, OWASP or others.
        • Seasoned experience working in a multi-team environment across multiple geographies.

        Workplace type:

        Hybrid Working

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • Lead and manage large, complex, and transformational cybersecurity projects and engagements.
          • Architect and provide advisory on cybersecurity frameworks integrating network technologies, IAM, data security, cloud, and security tools.
          • Incorporate AI technologies and tools into cybersecurity solutions and advisory practices.
          • Inspire, manage, and develop team competencies fostering a high-performance culture.
          • Drive business development efforts including sales, proposal development, and client engagement.
          • Oversee project delivery ensuring high quality standards, managing risks, and client expectations.
          • Build and maintain strong client relationships, understanding client needs and providing tailored cybersecurity consulting solutions.
          • Continuously learn and adopt new technologies to maintain competitive advantage and client relevance.

          Required Skills:

          • 10-13 years of professional cybersecurity experience, preferably within consulting or OEM environments.
          • Strong knowledge and experience in network technology, IAM, data security, cloud security, and associated security tools.
          • Conversant with AI technologies and projects—advisory or implementation experience considered a plus.
          • Demonstrated ability to lead and manage large or transformational cybersecurity engagements.
          • Strong leadership skills with proven experience in inspiring, managing, and building competencies in teams.
          • Business acumen with demonstrated ability to sell cybersecurity consulting services and manage delivery teams effectively.
          • Excellent communication, negotiation, and client management skills.
          • Strategic thinker with strong problem-solving and organizational capabilities.
          • Educational Qualification: Bachelor’s degree in IT, Computer Science, Information Security, Engineering or related field; MBA preferred.
          • Familiarity with cybersecurity frameworks and standards such as ISO 27001, NIST, and relevant industry regulations.

          Mandatory Skill Sets:

          • Cybersecurity, AI

          Preferred Skill Sets:

          • Certifcations :CISSP, GICSP, ISA 62443, CCNP, PCNSA, PCNSE, LPIC-1, RHCSA

          Years of Experience:

          • 10+ Years

          Educational Qualification:

          Btech, MBA preferred

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • Implement WIZ/Prisma to secure cloud-native applications across containers, serverless environments, and VMs.
            • Integrate security scans into CI/CD pipelines to enable DevSecOps best practices.
            • Manage vulnerability detection, compliance checks, and runtime protection for Kubernetes and cloud workloads.
            • Collaborate with DevOps and cloud teams to shift security left, embedding security early in the development lifecycle.-
            • Develop and enforce policies for secure application deployment in cloud-native environments.
            • Design and maintain automated security workflows using WIZ/Prisma across multi-cloud environments (Azure, AWS).
            • Enable real-time threat detection and incident response for containerized workloads and cloud services.
            • Define and implement best practices for vulnerability management, image scanning, and compliance reporting
            • Collaborate with developers to create secure-by-design container images and Infrastructure as Code (laC) templates.
            • Monitor and optimize WIZ/Prisma policies to adapt to evolving cloud-native application architectures.
            • Drive security automation initiatives to minimize manual intervention and increase Cloud environment maturity.
            • Identify and address vulnerabilities in cloud configurations, ensuring compliance with industry standards and monitoring cloud infrastructure for security gaps.
            • Automate deployments and integrate security tools using Python and Terraform.

            Preferred Requirements:

             

            • Expertise in WIZ/Prisma Cloud for cloud-native application security.
            • Hands-on experience with Terraform for automating infrastructure provisioning and security.
            • Familiarity with CSPM tools like Wiz/Prisma CSPM for monitoring and improving cloud security posture.
            • Proficiency in scripting and automation using Python to streamline processes.
            • Strong understanding of cloud environments (AWS, Azure, GCP) and their native security services.
            • Knowledge of DevSecOps principles, including integrating security into CI/CD pipelines and adopting Infrastructure as Code (laC) practices.
            • Ability to adapt security workflows to evolving multi-cloud and containerized application architectures.

            Required:

             

            • Minimum of 5 years of IT experience
            • At least 3+ years of specialization in CSPM tools
            • At least 2+ years of application development in python.
            • At least 2+ Experience with programming languages such as Terraform.
            • Minimum 2-3 years of experience in implementing and managing WIZ/Prisma Cloud for cloud-native application security.
            • 3-5 years of experience in managing and securing multi-cloud environments (AWS, Azure, GCP) with native security tools.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • The work is varied and may include some or all of the responsibilities mentioned below:
              • Design and development of engineering project pertaining to C&I design through concept, FEED, Basic Engineering to Detail engineering.
              • Preparation of technical concept reports by having clear understanding on customer’s needs and working with other disciplines and global offices.
              • Preparation of other design deliverables essential during concept, feasibility, optioneering, design development stages.
              • Technical and team leadership.
              • Check, review and develop various instrument deliverables of the project including input/output list, instrument list, instrument data sheets, and functional specifications, their assessment and justification.
              • Development of control system specification and its system architecture
              • Development of Control and Protection philosophy of plant.
              • Preparation of Cause & Effect diagrams and control function diagrams.
              • Equipment/Instrument selection and procurement, identification of all safety (nuclear and operational) requirements.
              • Production of vendor packages, coordination with manufacturer/contractor, review of vendor drawings/documents.
              • Liaising with all stakeholders and responsible for all technical issues related to their area of specialization; Co-ordination with other discipline specialists where areas interface or overlap exist.
              • Preparation of instrument specifications, loop diagrams and cabling schematics, schedules and location layouts
              • Participation in 3D model review and other design reviews of the project.
              • Estimation of costs and delivery of the work package within required timescales
              • Design/selection of PLCs/DCS/Data Processing Systems / Process Control High Integrity Plant Protection Systems.
              • Production of deliverables such as various design documentation, requirement specification and substantiation reports.
              • Co-ordination with other discipline specialists where areas interface or overlap exist.

              About You

               

              • Candidate should possess the following qualifications, skills and experience.
              • Suitable degree in Control and Instrumentation with domain experience in energy systems. Experience in detail engineering consultancy is preferred. 12- 18 years of work experience in the Control and Instrumentation engineering.
              • Experience in Nuclear, Power, Oil & Gas or other highly regulated industrial environment preferred.
              • Experience of working on UK, Canada, USA and Middle East project
              • Experience of Process Control & Instrumentation/Reactor Protection and Regulation system design.
              • Knowledge of Power Plant design and various systems associated with power plant i.e, Boiler, Turbine, Generator and Balance of Plant systems.
              • Commissioning experience will be an added advantage.
              • Understanding of project lifecycle and various stages of engineering project.
              • Knowledge of safety systems/high integrity systems/equipment, automation system design.
              • Knowledge of functional safety and its relevant industrial standards i.e. IEC 61508, 61511, 61513, know-how for SIL categorisation/ Integrity Targets and safety life cycle.
              • Development of Safety Requirement Specification, Functional Safety Management Plan, RAM analysis, Fault Tree Analysis.
              • Participation in various SIL Studies, LOPA and HAZOP
              • Working knowledge of field instrumentation including datasheets and hook-up drawings.
              • Understanding and knowledge about control valve and flow element sizing
              • Preparation of Control Logic Diagram, Loop Diagrams, Instrument Location and Instrument Installation Design.
              • Development of specification for PLC/SCADA/DCS and knowledge related to its Hardware and Software configuration.
              • Development of Control System Architecture for the entire plant.
              • Good understanding in Operational Technology (OT) Cybersecurity principles, able to understand the design concepts relevant to mitigate and prevent the exploitation of plant control system.
              • Good knowledge of Hazardous Area Classification and various protections.
              • Good knowledge of industrial communication standard protocols
              • Knowledge to Plant 3D model software, Smart Plant Instrumentation (SPI) and AVEVA.
              • Design knowledge of access control system, CCTV system, telephone, and PA system.
              • Working knowledge of cabling systems which include cable block diagrams, cable schedules, cable routing drawings, schematics, termination schedules and cable specifications.
              • Takes responsibility for nuclear safety with the ability to challenge appropriately.
              • Good working knowledge of industry standards, design and installation codes of practice and regulations.
              • A flair for solving complex problems from first principles and the ability to deliver multiple projects simultaneously.
              • Has the ability to generate cost effective ideas at various project stages.
              • Has the acumen of bringing on table digital innovative ideas benefitting the team and organization.
              • Strong delivery culture, and maintenance of strict timelines.
              • Proven computer aptitude, and expertise in MS office; Knowledge of AutoCAD and Visio desirable.
              • Demonstrable knowledge of multidisciplinary design projects, and relevant knowledge of site operations of process plant is desirable.
              • Having good knowledge in Technical Report writing
              • Participates in client and internal design reviews.
              • Ability to understand and define client’s requirements, plan & schedule deliverables, timelines.
              • Strong delivery culture, ability to multi-task, resource management, delegate tasks, develop and deliver cost/time-effective solutions.
              • Experience supporting construction and commissioning phases.
              • Experience or exposure to project management principles is desirable.
              • Ability to understand and define client’s requirements, plan & schedule deliverables, timelines.
              • Ability to mentor junior engineers and support them with technical guidance.
              • Ability to lead the entire project independently with minimum guidance and support.
              • Proven strong problem solving, organizational and interpersonal skills.
              • Excellent written and verbal communication and presentation skills with a proven ability to write accurate, detailed and concise technical reports.
              • Flexible to relocate to AtkinsRéalis India Office Locations (Bangalore/Gurgaon/Mumbai) flexible in travelling to AtkinsRéalis’ and client’s’office locations around the world, if required.
              • Experienced and innovative team player with the ability to work on own initiative and to take responsibility for the development and supervision of design projects.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • • Monitor security alerts, incidents, and system vulnerabilities.
                • Implement security policies, controls, and best practices.
                • Support audits, compliance, and risk assessments.
                • Train employees on cybersecurity awareness.
                • Respond to incidents and coordinate recovery efforts.

                Qualifications

                • Bachelor’s degree in IT, Cybersecurity, or related field.
                • 0–3 years in IT security; new graduates with relevant certifications are welcome.
                • Familiarity with firewalls, SIEM tools, or vulnerability management.
                • Strong analytical and incident-response skills.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • • Monitor security alerts, incidents, and system vulnerabilities.
                • Implement security policies, controls, and best practices.
                • Support audits, compliance, and risk assessments.
                • Train employees on cybersecurity awareness.
                • Respond to incidents and coordinate recovery efforts.

                Qualifications

                • Bachelor’s degree in IT, Cybersecurity, or related field.
                • 0–3 years in IT security; new graduates with relevant certifications are welcome.
                • Familiarity with firewalls, SIEM tools, or vulnerability management.
                • Strong analytical and incident-response skills.

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • •  Design and optimize chemical, thermal, and/or mechanical industrial processes from concept through commissioning, ensuring safe, efficient, and compliant operations. Specify equipment, conduct risk assessments, and resolve process issues, while scaling and improving manufacturing workflows, tools, and quality standards to enable reliable, cost-effective production aligned with project objectives.Must have skills : Network Security Operations

                  Good to have skills : NA

                  Minimum 3 Year(s) Of Experience Is Required

                  Educational Qualification : 15 years full time education

                  Summary: We are seeking a skilled Network Engineer with strong expertise in network infrastructure and security technologies. The ideal candidate will be responsible for designing, implementing, and maintaining network systems to ensure high availability, security, and performance.. Roles & Responsibilities: – Design, configure, and maintain network infrastructure including firewalls, routers, switches, and load balancers. – Manage and troubleshoot firewall platforms such as Cisco ASA, Fortinet, and Palo Alto. – Implement and support routing and switching solutions for enterprise networks. – Configure and optimize load balancers (Citrix NetScaler, F5) for application delivery and high availability. – Develop and maintain network automation scripts using Python and Ansible to streamline operations. – Monitor network performance, identify bottlenecks, and implement solutions to improve reliability and security. – Collaborate with cross-functional teams to integrate network solutions with cloud platforms (AWS, Azure, Google Cloud, OCI). – Ensure compliance with security standards and best practices. Professional & Technical Skills: – Hands-on experience with firewall technologies: Cisco, Fortinet, Palo Alto. – Strong knowledge of routing and switching protocols (BGP, OSPF, VLAN, STP). – Expertise in load balancer configuration (Citrix NetScaler, F5). – Proficiency in network automation tools: Python, Ansible or any other tool. – Familiarity with cloud networking concepts (AWS, Azure, Google Cloud, OCI) – added advantage. – Excellent troubleshooting and problem-solving skills. – Strong communication and documentation abilities. Additional Information: – The candidate should have minimum 5 years of experience in Network Security Operations. – Relevant certifications (CCNP, Fortinet NSE, Palo Alto PCNSE, F5 Certified, Netscaler or any Cloud & Automation Certification) preferred – This position is based at our Gurugram office. – A 15 years full time education is required., 15 years full time education

    Apply / Know more …

Job Description

In This Role, Your Responsibilities Will Be:

• • • • • • • • • • Minimum 5 years overall experience in DCS/PLC/SCADA/Field instrument diagnostics & troubleshooting. Yokogawa experience in DCS/PLC preferred.
                  • Experience in Industrial/Process Automation
                  • Qualification required is BE/B.Tech in Instrumentation /Electronics.

                  Skills and Competency : 1.Knowledge of DCS,PLC,SCADA and control systems and components used in Industrial automation domain.

                  • Knowledge of DCS, PLC, Field instruments diagnostics & troubleshooting
                  • Experience in Yokogawa DCS /PLC System an added advantage.
                  • Knowledge of data communications protocols, networking equipment and computer operating systems such as Windows
                  • Maintenance and service experience in Industrial automation domain.

                  Job Role : Maintenance /Resident support engineer as per mandatory contractual obligations from customer (HMEL/IOCL/GAIL/BPCL Petroleum Refineries). Customer has awarded us resident support contract for maintenance of Yokogawa system at plant. Strong possibility of renewal of contract based on service execution & customer satisfaction index.

                  Key Responsibilities : 1.Maintain DCS,PLC,HMI,SCADA control systems and components

                  • Provide appropriate and timely reports/technical advice on matters relating to systems under scope of work and services.
                  • Carry out day to day duties in accordance with daily job schedule.
                  • Carry out day to day duties in accordance with safety principles, corporate values, Quality policies and strategies.
                  • Day to day interaction with customers, regional and head office of YIL.

    Apply / Know more …